MAX7219LedMatrix

Library for the ESP8266 on Arduino IDE displaying text on one or multiple MAX7219 8x8 led matrices.

This library displays text and sets specific pixels on one or multiple 8x8 led matrices with a MAX7219 driver chip controlled through the SPI interface. These modules are relatively cheep and can be daisy chained which makes it easy to get a led text bar up and running You can find modules e.g. with Banggood (<-affiliate link).

For details about the MAX7219 theory, wiring, schematic, etc. there's a great post by Nick Gammon: http://www.gammon.com.au/forum/?id=11516

Currently this library supports the following operations:

set pixels
write text with a simple font
scroll text left or right
oscillate text between the two ends

You're welcome to read in my blog how this library came about.

Example

#include <SPI.h>
#include "LedMatrix.h"

#define NUMBER_OF_DEVICES 1
#define CS_PIN 2
LedMatrix ledMatrix = LedMatrix(NUMBER_OF_DEVICES, CS_PIN);

void setup() {
  Serial.begin(115200); // For debugging output
  ledMatrix.init();
  ledMatrix.setIntensity(4); // range is 0-15
  ledMatrix.setText("MAX7219 Demo");
}

void loop() {
  ledMatrix.clear();
  ledMatrix.scrollTextLeft();
  ledMatrix.drawText();
  ledMatrix.commit(); // commit transfers the byte buffer to the displays
  delay(200);
}

Installing library in Arduino IDE

open Arduino IDE
open preferences and take note of the 'Sketchbook location' path
navigate into the libraries sub folder at that path (e.g. with terminal)
clone this Git repository into that folder
restart Arduino IDE
you should now find the MAX7219LedMatrix library in Sketch > Include Library

Connecting the module(s) to the ESP8266

LED Matrix	ESP8266
VCC	+3.3V
GND	GND
DIN	GPIO13 (HSPID)
CS	Choose free GPIO, e.g. GPIO2
CLK	GPIO14 (HSPICLK)

biohazardxxx/MAX7219LedMatrix

MAX7219LedMatrix

Example

Installing library in Arduino IDE

Connecting the module(s) to the ESP8266