bisky00's Stars
bisky00/arduino_surface_TX_4ch
DIY RC transmitter based on Arduino Pro Mini.
stanekTM/RX_nRF24L01_Telemetry_Motor_Servo
RC receiver nRF24L01 with ATmega328P/16Mhz. Includes 2x motor driver with brake (e.g. mix tank-arcade), servo outputs, telemetry voltage A1 and RSSI. Example of RX prototype:
stanekTM/TX_nRF24_2ch_Oled
Simple surface 2 channel RC transmitter for cars, boats and tanks. The hardware includes a low-cost nRF24L01+ transceiver and an ATmega328P processor with an OLED screen. It contains the telemetry of the monitored voltage RX.
felias-fogg/RescueAVR
An Arduino sketch that is able to do high-voltage programming in order to resurrect bricked AVR MCUs(in addition, you need a bit of HW on a breadboard)
dbuezas/lgt8fx
Board Package for Logic Green LGT8F328P LGT8F328D and LGT8F88D
RalphBacon/LGT8F328P-Arduino-Clone-Chip-ATMega328P
An improved ATMega328P with this cheap clone Logic Green LGT8F328P
MaslowCNC/Firmware
Maslow Firmware
doohans/arduino_surface_TX_4ch
DIY RC transmitter based on Arduino Pro Mini.
schlion/EggDuino
Arduino Firmware for Spherebot / Eggbot integration in Inkscape
TheDIYGuy999/Rc_Engine_Sound
Allows to play vehicle engine sounds on Arduino
Creality3DPrinting/Ender-3
The Creality3D Ender-3, a fully Open Source 3D printer perfect for new users on a budget.
luc-github/ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
gnea/grbl
An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino
OctoPrint/OctoPrint
OctoPrint is the snappy web interface for your 3D printer!
MarlinFirmware/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Iggnus/cheali-charger-i1
cheap lipo charger
TheDIYGuy999/RC_Transmitter_STM32
An Arduino 2.4GHz and IR remote controller
TheDIYGuy999/RC_Transmitter
An Arduino 2.4GHz and IR remote controller with OLED display
semerad/gt3b
Alternative firmware for FlySky radio FS-GT3B and clones
silpstream/deviation
Custom firmware for Walkera DEVO Radios
DeviationTX/deviation
Custom firmware for RC Transmitters
sim-/tgy
tgy -- Open Source Firmware for ATmega-based Brushless ESCs
goebish/nrf24_multipro
nRF24L01 multi-protocol RC transmitter
Gabapentin/Arduino-RC-6CH-Radio-control
Arduino project to upgrade cheap Hobbyking HK-T6A or Flysky FS-CT6B transmitters or any other old RC TX
stawel/cheali-charger
cheap lipo charger
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
alangarf/picstep
PICStep Stepper Controller