On most Linux & BSD machines, cronlock will install just by downloading it & making it executable. Here's the one-liner:
sudo curl -q -L https://raw.github.com/kvz/cronlock/master/cronlock -o /usr/bin/cronlock && sudo chmod +x $_
With Redis present on localhost
, cronlock should now already work in basic form.
Let's test by letting it execute a simple pwd
:
CRONLOCK_HOST=localhost cronlock pwd
If this returns the current directory we're good to go. More examples below.
Uses a central Redis server to globally lock cronjobs across a distributed system. This can be usefull if you have 30 webservers that you deploy crontabs to (such as mailing your customers), but you don't want 30 cronjobs spawned.
Of course you could also deploy your cronjobs to 1 box, but in volatile environments such as EC2 it can be helpful not to rely on 1 'throw away machine' for your scheduled tasks, and have 1 deploy-script for all your workers.
Another common problem that cronlock will solve is overlap by a single server/cronjob. It happens a lot that developers underestimate how long a job will run. This can happen because the job waits on something, acts different under high load/volume, or enters an endless loop.
In these cases you don't want the job to be fired again at the next cron-interval, making your problem twice as bad,
some intervals later, there's a huge ps auxf
with overlapping cronjobs, high server load, and eventually a crash.
By settings locks, cronlock can also prevent the overlap in longer-than-expected-running cronjobs.
- Lightweight
- As little dependencies as possible / No setup
- Follows locking logic from this Redis documentation
- Well tested & documented
- Bash with
/dev/tcp
enabled. Older Debian/Ubuntu systems disable/dev/tcp
md5
ormd5sum
- A Redis server that is accessible by all cronlock machines
CRONLOCK_CONFIG
location of config file. this is optional since all config can also be passed as environment variables. default:<DIR>/cronlock.conf
,/etc/cronlock.conf
Using the CRONLOCK_CONFIG
file or by exporting in your environment, you can set these variables
to change the behavior of cronlock:
CRONLOCK_HOST
the Redis hostname. default:localhost
CRONLOCK_PORT
the Redis port. default:6379
CRONLOCK_AUTH
the Redis auth password. default: Not presentCRONLOCK_DB
the Redis database. default:0
CRONLOCK_REDIS_TIMEOUT
the length of time we wait for a response from redis before we consider it in an errored state. This ensures that if the redis connection goes away that we don't wait forever waiting for a response. default:30
CRONLOCK_GRACE
determines how many seconds a lock should at least persist. This is to make sure that if you have a very small job, and clocks aren't in sync, the same job on server2/3/4/5/6/etc (maybe even slightly behind in time) will just fire right after server1 releases the lock. default:40
(I recommend using a grace of at least 30s)CRONLOCK_RELEASE
determines how long a lock can persist at most. Acts as a failsafe so there can be no locks that persist forever in case of failure. default is a day:86400
CRONLOCK_RECONNECT_ATTEMPTS
the number of times we try to reconnect before erroring. If the redis connection is closed, we will attempt to reconnect to redis upto this amount of times. default:5
CRONLOCK_RECONNECT_BACKOFF
the lenght of time to increase the wait between reconnects. Acts as a failsafe to allow redis to be started before we try to reconnect. Set to 0 to retry the connection immediately. default:5
CRONLOCK_KEY
a unique key for this command in the global Redis server. default: a hash of cronlock's argumentsCRONLOCK_PREFIX
Redis key prefix used by all keys. default:cronlock
CRONLOCK_VERBOSE
set toyes
to print debug messages. default:no
CRONLOCK_NTPDATE
set toyes
update the server's clock againtpool.ntp.org
before execution. default:no
CRONLOCK_TIMEOUT
how long the command can run before it gets issues akill -9
. default:0
; no timeout
crontab -e
* * * * * cronlock ls -al
In this configuration, ls -al
will be launched every minute. If the previous
ls -al
has not finished yet, another one is not started.
This works on 1 server, as the default CRONLOCK_HOST
of localhost
is used.
In this setup, cronlock works much like Tim Kay's solo, except cronlock requires Redis, so I recommend using Tim Kay's solution here.
echo '0 8 * * * CRONLOCK_HOST=redis.mydomain.com cronlock /var/www/mail_customers.sh' | crontab
In this configuration, a central Redis server is used to track the locking for
/var/www/mail_customers.sh
. So you see that throughout a cluster of 100 servers,
just one instance of /var/www/mail_customers.sh
is ran every morning. No less, no more.
As long as your Redis server and at least 1 volatile worker is alive, this happens.
To avoid messy crontabs, you can use a config file for shared config instead.
Unless CRONLOCK_CONFIG
is set, cronlock will look in ./cronlock.conf
, then
in /etc/cronlock.conf
.
Example:
cat << EOF > /etc/cronlock.conf
CRONLOCK_HOST="redis.mydomain.com"
CRONLOCK_GRACE=50
CRONLOCK_PREFIX="mycompany.cronlocks."
CRONLOCK_NTPDATE="yes"
EOF
crontab -e
* * * * * cronlock /var/www/mail_customers.sh # will use config from /etc/cronlock.conf
By default cronlock uses your command and it's arguments to make a unique identifier
by which the global lock is acquired. However if you want to run: ls -al
or ls -a
,
but just 1 instance of either, you'll want to provide your own key:
crontab -e
# One of two will be executed because they share the same KEY
* * * * * CRONLOCK_KEY="ls" cronlock ls -al
* * * * * CRONLOCK_KEY="ls" cronlock ls -a
If you use the same script and Redis server for multiple applications, an unwanted lock could deny app2 it's script.
You could make up your own unique CRONLOCK_KEY
to circumvent, but it's probably
better to use the CRONLOCK_PREFIX
for that:
crontab -e
* * * * * CRONLOCK_PREFIX="mylocks.app1." cronlock /var/www/mail_customers.sh
crontab -e
* * * * * CRONLOCK_PREFIX="mylocks.app2." cronlock /var/www/mail_customers.sh
Now both /var/www/mail_customers.sh will run, because they have a different application in their prefixes.
- =
200
Success (delete succeeded or lock not acquired, but normal execution) - =
201
Failure (cronlock error) - =
202
Failure (cronlock timeout) - <
200
Success (acquired lock, executed your command), passes the exit code of your command
This project implements the Semantic Versioning guidelines.
Releases will be numbered with the following format:
<major>.<minor>.<patch>
And constructed with the following guidelines:
- Breaking backward compatibility bumps the major (and resets the minor and patch)
- New additions without breaking backward compatibility bumps the minor (and resets the patch)
- Bug fixes and misc changes bumps the patch
For more information on SemVer, please visit http://semver.org.
Copyright (c) 2013 Kevin van Zonneveld, http://kvz.io
Licensed under MIT: http://kvz.io/licenses/LICENSE-MIT