SUC - Samsung Upload Client v1.0

(c) B. Kerler 2018-2022, licensed under MIT License

A tool to dump RAM using S-Boot Upload Mode (in python)

Thx to Nitay Artenstein's code at https://github.com/nitayart/sboot_dump, ported to python and added full support based on reversing sboot

Supported

Samsung QC (Tested with S7)
Samsung MTK (Tested with A419F)
Samsung Unisoc/Spreadtrum (Tested with Galaxy Prime)

Install

Python 3.8 or higher pip install pyusb pyserial

Show partition table on the device

python3 samupload.py

For dumping all memory areas:

python3 samupload.py all

For dumping a specfic memory range:

python3 samupload.py range 0x0 0xffffffff

For dumping a full memory range:

python3 samupload.py full

For dumping individual areas (Index 0):

python3 samupload.py partition 0

Windows install

Install usbdk and make sure to remove old libusb dlls from windows/system32 folder. Get the usbdk installer (.msi) from here and install it
Install normal Samsung Serial Port driver (or use default Windows COM Port one, make sure no exclamation is seen)

Linux install

sudo apt purge ModemManager
sudo usermod -aG plugdev $USER
sudo usermod -aG dialout $USER
sudo cp Drivers/*.rules /etc/udev/rules.d
sudo udevadm control -R

sudo pip3 install -r requirements.txt

Enjoy !

bkerler/sboot_dump