bkubicek/Marlin

Issues

• Update for Arduino 1.0

  #36 opened 13 years ago by bbum
  4

• extruder retract breaks motion planer

  #35 opened 13 years ago by dirk-makerhafen
  4

• compilation error with latest arduino (0024)

  #34 opened 13 years ago by maybites
  3

• Baud Rate

  #30 opened 13 years ago by bkubicek
  12

• Homing Problem

  #32 opened 13 years ago by tatoogoo
  2

• PID

  #28 opened 13 years ago by bkubicek
  36

• Jerking problem

  #4 opened 13 years ago by bkubicek
  5

• sudden crashes:

  #31 opened 13 years ago by bkubicek
  1

• Change steps per unit on the way

  #29 opened 13 years ago by hurzl
  2

• flow rate

  #18 opened 13 years ago by bkubicek
  1

• LCD interrupt driven library.

  #3 opened 13 years ago by bkubicek
  9

• LCD messaging gcode

  #16 opened 13 years ago by bkubicek
  0

• Bed temp (thermistor) is always zero

  #25 opened 13 years ago by hurzl
  1

• optimizing interrupt routine

  #2 opened 13 years ago by bkubicek
  3

• TRAVEL_AT_MAXSPEED?

  #26 opened 13 years ago by hurzl
  1

• USE_WATCHDOG?

  #27 opened 13 years ago by hurzl
  2

• dedicated button interrupt

  #19 opened 13 years ago by bkubicek
  1

• temperature

  #17 opened 13 years ago by bkubicek
  2

• thermistor table values

  #24 opened 13 years ago by hurzl
  5

• Store settings in EEPROM?

  #23 opened 13 years ago by lampmaker
  1

• Catch acceleration=0 errors

  #22 opened 13 years ago by lampmaker
  1

• Please bump up Marlin version number...

  #8 opened 13 years ago by bradleyf
  2

• Max feedrate 240? // acceleration

  #21 opened 13 years ago by lampmaker
  3

• Tiny LCD

  #6 opened 13 years ago by bkubicek
  2

• M84 activates extruder stepper motor

  #14 opened 13 years ago by flouSH
  6

• Layer skewing

  #13 opened 13 years ago by bradleyf
  1

• interupt routine "busy" got triggered?

  #12 opened 13 years ago by lampmaker
  1

• "tool change" pause + abort

  #20 opened 13 years ago by bkubicek
  0

• Defining "ADVANCE" in configuration causes extruder to ignore speed settings

  #10 opened 13 years ago by j-c
  1

• minute counter

  #15 opened 13 years ago by bkubicek
  1

• Back & Right endstops don't trigger hold

  #11 opened 13 years ago by flouSH
  2

• Configuration H

  #9 opened 13 years ago by jetguy
  3

• repetitive clicking

  #5 opened 13 years ago by bkubicek
  2

• Serial Library

  #1 opened 13 years ago by bkubicek
  1

• deceleration!= acceleration

  #7 opened 13 years ago by bkubicek
  0