/node-problem-detector

This is a place for various problem detectors running on the Kubernetes nodes.

Primary LanguageGoApache License 2.0Apache-2.0

node-problem-detector

Build Status Go Report Card

node-problem-detector aims to make various node problems visible to the upstream layers in cluster management stack. It is a daemon which runs on each node, detects node problems and reports them to apiserver. node-problem-detector can either run as a DaemonSet or run standalone. Now it is running as a Kubernetes Addon enabled by default in the GCE cluster.

Background

There are tons of node problems that could possibly affect the pods running on the node, such as:

  • Infrastructure daemon issues: ntp service down;
  • Hardware issues: Bad cpu, memory or disk;
  • Kernel issues: Kernel deadlock, corrupted file system;
  • Container runtime issues: Unresponsive runtime daemon;
  • ...

Currently these problems are invisible to the upstream layers in cluster management stack, so Kubernetes will continue scheduling pods to the bad nodes.

To solve this problem, we introduced this new daemon node-problem-detector to collect node problems from various daemons and make them visible to the upstream layers. Once upstream layers have the visibility to those problems, we can discuss the remedy system.

Problem API

node-problem-detector uses Event and NodeCondition to report problems to apiserver.

  • NodeCondition: Permanent problem that makes the node unavailable for pods should be reported as NodeCondition.
  • Event: Temporary problem that has limited impact on pod but is informative should be reported as Event.

Problem Daemon

A problem daemon is a sub-daemon of node-problem-detector. It monitors a specific kind of node problems and reports them to node-problem-detector.

A problem daemon could be:

  • A tiny daemon designed for dedicated usecase of Kubernetes.
  • An existing node health monitoring daemon integrated with node-problem-detector.

Currently, a problem daemon is running as a goroutine in the node-problem-detector binary. In the future, we'll separate node-problem-detector and problem daemons into different containers, and compose them with pod specification.

Each category of problem daemon can be disabled at compilation time by setting corresponding build tags. If they are disabled at compilation time, then all their build dependencies, global variables and background goroutines will be trimmed out of the compiled executable.

List of supported problem daemons:

Problem Daemon NodeCondition Description Disabling Build Tag
KernelMonitor KernelDeadlock A system log monitor monitors kernel log and reports problems and metrics according to predefined rules. disable_system_log_monitor
AbrtAdaptor None Monitor ABRT log messages and report them further. ABRT (Automatic Bug Report Tool) is health monitoring daemon able to catch kernel problems as well as application crashes of various kinds occurred on the host. For more information visit the link. disable_system_log_monitor
CustomPluginMonitor On-demand(According to users configuration) A custom plugin monitor for node-problem-detector to invoke and check various node problems with user defined check scripts. See proposal here. disable_custom_plugin_monitor
SystemStatsMonitor None(Could be added in the future) A system stats monitor for node-problem-detector to collect various health-related system stats as metrics. See proposal here. disable_system_stats_monitor

Exporter

An exporter is a component of node-problem-detector. It reports node problems and/or metrics to certain back end. Some of them can be disable at compile time using a build tag. List of supported exporters:

Exporter Description Disabling Build Tag
Kubernetes exporter Kubernetes exporter reports node problems to Kubernetes API server: temporary problems get reported as Events, and permanent problems get reported as Node Conditions.
Prometheus exporter Prometheus exporter reports node problems and metrics locally as Prometheus metrics
Stackdriver exporter Stackdriver exporter reports node problems and metrics to Stackdriver Monitoring API. disable_stackdriver_exporter

Usage

Flags

  • --version: Print current version of node-problem-detector.
  • --hostname-override: A customized node name used for node-problem-detector to update conditions and emit events. node-problem-detector gets node name first from hostname-override, then NODE_NAME environment variable and finally fall back to os.Hostname.

For System Log Monitor

  • --config.system-log-monitor: List of paths to system log monitor configuration files, comma separated, e.g. config/kernel-monitor.json. Node problem detector will start a separate log monitor for each configuration. You can use different log monitors to monitor different system log.

For System Stats Monitor

  • --config.system-stats-monitor: List of paths to system stats monitor config files, comma separated, e.g. config/system-stats-monitor.json. Node problem detector will start a separate system stats monitor for each configuration. You can use different system stats monitors to monitor different problem-related system stats.

For Custom Plugin Monitor

  • --config.custom-plugin-monitor: List of paths to custom plugin monitor config files, comma separated, e.g. config/custom-plugin-monitor.json. Node problem detector will start a separate custom plugin monitor for each configuration. You can use different custom plugin monitors to monitor different node problems.

For Kubernetes exporter

  • --enable-k8s-exporter: Enables reporting to Kubernetes API server, default to true.
  • --apiserver-override: A URI parameter used to customize how node-problem-detector connects the apiserver. This is ignored if --enable-k8s-exporter is false. The format is same as the source flag of Heapster. For example, to run without auth, use the following config:
    http://APISERVER_IP:APISERVER_PORT?inClusterConfig=false
    
    Refer heapster docs for a complete list of available options.
  • --address: The address to bind the node problem detector server.
  • --port: The port to bind the node problem detector server. Use 0 to disable.

For Prometheus exporter

  • --prometheus-address: The address to bind the Prometheus scrape endpoint, default to 127.0.0.1.
  • --prometheus-port: The port to bind the Prometheus scrape endpoint, default to 20257. Use 0 to disable.

For Stackdriver exporter

Deprecated Flags

  • --system-log-monitors: List of paths to system log monitor config files, comma separated. This option is deprecated, replaced by --config.system-log-monitor, and will be removed. NPD will panic if both --system-log-monitors and --config.system-log-monitor are set.

  • --custom-plugin-monitors: List of paths to custom plugin monitor config files, comma separated. This option is deprecated, replaced by --config.custom-plugin-monitor, and will be removed. NPD will panic if both --custom-plugin-monitors and --config.custom-plugin-monitor are set.

Build Image

  • go get or git clone node-problem-detector repo into $GOPATH/src/k8s.io or $GOROOT/src/k8s.io with one of the below directions:

    • cd $GOPATH/src/k8s.io && git clone git@github.com:kubernetes/node-problem-detector.git
    • cd $GOPATH/src/k8s.io && go get k8s.io/node-problem-detector
  • run make in the top directory. It will:

    • Build the binary.
    • Build the docker image. The binary and config/ are copied into the docker image.

If you do not need certain categories of problem daemons, you could choose to disable them at compilation time. This is the best way of keeping your node-problem-detector runtime compact without unnecessary code (e.g. global variables, goroutines, etc). You can do so via setting the BUILD_TAGS environment variable before running make. For example:

BUILD_TAGS="disable_custom_plugin_monitor disable_system_stats_monitor" make

Above command will compile the node-problem-detector without Custom Plugin Monitor and System Stats Monitor. Check out the Problem Daemon section to see how to disable each problem daemon during compilation time.

Note: By default node-problem-detector will be built with systemd support with make command. This requires systemd develop files. You should download the systemd develop files first. For Ubuntu, libsystemd-journal-dev package should be installed. For Debian, libsystemd-dev package should be installed.

Push Image

make push uploads the docker image to registry. By default, the image will be uploaded to staging-k8s.gcr.io. It's easy to modify the Makefile to push the image to another registry.

Installation

The easiest way to install node-problem-detector into your cluster is to use the Helm chart:

helm install stable/node-problem-detector

Or alternatively, to install node-problem-detector manually:

  1. Edit node-problem-detector.yaml to fit your environment. Set log volume to your system log directory (used by SystemLogMonitor). You can use a ConfigMap to overwrite the config directory inside the pod.

  2. Edit node-problem-detector-config.yaml to configure node-problem-detector.

  3. Create the ConfigMap with kubectl create -f node-problem-detector-config.yaml.

  4. Create the DaemonSet with kubectl create -f node-problem-detector.yaml.

Start Standalone

To run node-problem-detector standalone, you should set inClusterConfig to false and teach node-problem-detector how to access apiserver with apiserver-override.

To run node-problem-detector standalone with an insecure apiserver connection:

node-problem-detector --apiserver-override=http://APISERVER_IP:APISERVER_INSECURE_PORT?inClusterConfig=false

For more scenarios, see here

Try It Out

You can try node-problem-detector in a running cluster by injecting messages to the logs that node-problem-detector is watching. For example, Let's assume node-problem-detector is using KernelMonitor. On your workstation, run kubectl get events -w. On the node, run sudo sh -c "echo 'kernel: BUG: unable to handle kernel NULL pointer dereference at TESTING' >> /dev/kmsg". Then you should see the KernelOops event.

When adding new rules or developing node-problem-detector, it is probably easier to test it on the local workstation in the standalone mode. For the API server, an easy way is to use kubectl proxy to make a running cluster's API server available locally. You will get some errors because your local workstation is not recognized by the API server. But you should still be able to test your new rules regardless.

For example, to test KernelMonitor rules:

  1. make (build node-problem-detector locally)
  2. kubectl proxy --port=8080 (make a running cluster's API server available locally)
  3. Update KernelMonitor's logPath to your local kernel log directory. For example, on some Linux systems, it is /run/log/journal instead of /var/log/journal.
  4. ./bin/node-problem-detector --logtostderr --apiserver-override=http://127.0.0.1:8080?inClusterConfig=false --config.system-log-monitor=config/kernel-monitor.json --config.system-stats-monitor=config/system-stats-monitor.json --port=20256 --prometheus-port=20257 (or point to any API server address:port and Prometheus port)
  5. sudo sh -c "echo 'kernel: BUG: unable to handle kernel NULL pointer dereference at TESTING' >> /dev/kmsg"
  6. You can see KernelOops event in the node-problem-detector log.
  7. sudo sh -c "echo 'kernel: INFO: task docker:20744 blocked for more than 120 seconds.' >> /dev/kmsg"
  8. You can see DockerHung event and condition in the node-problem-detector log.
  9. You can see DockerHung condition at http://127.0.0.1:20256/conditions.
  10. You can see disk related system metrics in Prometheus format at http://127.0.0.1:20257/metrics.

Note:

  • You can see more rule examples under test/kernel_log_generator/problems.
  • For KernelMonitor message injection, all messages should have kernel: prefix (also note there is a space after :); or use generator.sh.
  • To inject other logs into journald like systemd logs, use echo 'Some systemd message' | systemd-cat -t systemd.

Dependency Management

node-problem-detector uses go modules to manage dependencies. Therefore, building node-problem-detector requires golang 1.11+. It still uses vendoring. See the Kubernetes go modules KEP for the design decisions. To add a new dependency, update go.mod and run GO111MODULE=on go mod vendor.

Remedy Systems

A remedy system is a process or processes designed to attempt to remedy problems detected by the node-problem-detector. Remedy systems observe events and/or node conditions emitted by the node-problem-detector and take action to return the Kubernetes cluster to a healthy state. The following remedy systems exist:

  • Draino automatically drains Kubernetes nodes based on labels and node conditions. Nodes that match all of the supplied labels and any of the supplied node conditions will be prevented from accepting new pods (aka 'cordoned') immediately, and drained after a configurable time. Draino can be used in conjunction with the Cluster Autoscaler to automatically terminate drained nodes. Refer to this issue for an example production use case for Draino.
  • Descheduler strategy RemovePodsViolatingNodeTaints evicts pods violating NoSchedule taints on nodes. The k8s scheduler's TaintNodesByCondition feature must be enabled. The Cluster Autoscaler can be used to automatically terminate drained nodes.

Testing

NPD is tested via unit tests, NPD e2e tests, Kubernetes e2e tests and Kubernetes nodes e2e tests. Prow handles the pre-submit tests and CI tests.

CI test results can be found at below:

  1. Unit tests
  2. NPD e2e tests
  3. Kubernetes e2e tests
  4. Kubernetes nodes e2e tests

Running tests

Unit test is ran via make test.

See NPD e2e test documentation for how to setup and run NPD e2e tests.

Problem Maker

Problem maker is a program used in NPD e2e tests to generate/simulate node problems. It is ONLY intended to be used by NPD e2e tests. Please do NOT run it on your workstation, as it could cause real node problems.

Docs

Links