blastrock/Marlin-sv06

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

This repository contains a Marlin firmware for the Sovol SV06.

This is an attempt at cleaning up branches from various other firmwares while providing a working Marlin 2.1.2 firmware with X-Twist compensation support.

The rebase over Marlin 2.1.2 does not tweak the configuration, except for the following small changes:

• Enable X-Twist Compensation
• Disable beeps (I hate beeps)
• Enable watchdog (Marlin warns that it should be enabled)

There is no Unified Bed Leveling build because I couldn't make it work on my printer. When it is enabled, for some reason motors spin more slowly and sensorless homing is broken (it keeps grinding). My uneducated guess is that the board is not fast enough for the UBL calculations.

How to download the rebased firmware

You can download the released firmware here.

How to explore this repository

You'll find here the following branches:

• rebase-sovol-2.0.9.2: The original Sovol SV06 firmware
• rebase-sovol-2.0.9.2-bare: The sovol fork but a little bit cleaned up (file permissions were fixed)
• rebase-sovol-2.1.2-xtwist: The sovol fork, rebased over Marlin 2.1.2
• rebase-hillsoftware: The hillsoftware fork based on the actual commit from Marlin's bugfix-2.1.2 branch