blemasle/arduino-mcp23017

Issues

• Interrupt behaviour on multiple MCP23017

  #34 opened a year ago by bespezzano
  4

• Datasheet Change Due To Issue Discovered In MCP23017 Chip

  #33 opened a year ago by woolseyj
  1

• Init method should not enable pull-up by default

  #31 opened 2 years ago by rolgordijn
  2

• Encoders

  #24 opened 3 years ago by bespezzano
  4

• Interrupts aren't open drain by default

  #26 opened 3 years ago by P4rk
  1

• Problem with readPort

  #22 opened 3 years ago by rhaamo
  3

• Problem in dual configuration

  #23 opened 3 years ago by FelixWeichselgartner
  2

• ESP8266/ESP32 Support

  #20 opened 3 years ago by openedhardware
  2

• Multiple boards on 1 bus

  #19 opened 3 years ago by PizzaProgram
  5

• Does this library support the smaller sibling MCP23008 also?

  #18 opened 3 years ago by JesseCake
  1

• _BV macro missed compiling for Arduino 33

  #17 opened 5 years ago by andreacer
  4

• Possible to use TwoWire as software I2C

  #7 opened 5 years ago by ScholliYT
  12

• According to the issue SoftwareSerial: Make the bus more general => SPI / I2C (HW and SW)

  #16 opened 5 years ago by Beerlesklopfer
  1

• Understanding Example PortCopyOnInterrupt

  #13 opened 5 years ago by frankhoffmanndo
  4

• Not able to initiate the class in an array

  #11 opened 5 years ago by jviseur
  8

• Problem with digitalRead

  #6 opened 5 years ago by pspastushkov
  4

• Compile error, multiple default-values specified

  #8 opened 5 years ago by trycoon
  0

• INPUT-OUTPUT-Definition

  #4 opened 6 years ago by Bms7
  6

• delay time for a bounce switch

  #5 opened 6 years ago by bill-in-iowa
  3

• add support to use wire1?

  #2 opened 6 years ago by yanzixiang
  2

• Arduino Library Manager -- Incorrect GitHub Link

  #1 opened 6 years ago by Jgunde
  1