Sol Mate e-Paper Display ☀️

I initially made the ☀️ Sol Mate GPT, but it didn't take too long until I wondered what it would look like on an e-Paper display.

The script to update the screen takes a location (maybe your own, maybe your best friend's, or even a fictional place!) and get the weather for that location, then generate an illustration of the location including the current weather and lighting conditions. So if it's raining, there will be people with umbrellas in the picture, and so on. If you do generate for a fictional location, the weather service will be given the latitude/longitude of the most similar place on Earth (according to GPT). The illustrations are rendered using Dall-E 3. This is why an OpenAI API token is necessary to run it.

This repository contains all the code that was needed to generate and display a weather report for any specified location on a Raspberry Pi with an attached Waveshare e-Paper display.

Hardware

Raspberry Pi 5
Waveshare e-Paper 7.3" display (code needs to be updated for other sizes)

More pictures

Software & Usage

This should all run on your Raspberry Pi.

I recommend setting up a virtual environment for Python, such as uv, first. Here are the instructions for if you're using uv (to be run inside the clone of this repo):

uv venv
source .venv/bin/activate
uv pip install -r requirements.txt

Without uv:

python -m venv .
source .venv/bin/activate
pip install -r requirements.txt

You will need to specify an OPENAI_API_KEY environment variable. For your convenience, the code will load environment variables from a .env file in the current working directory.

Now you can use the control.py script to generate an image and show it on the screen:

python control.py show Barcelona

Waveshare recommends you don't leave the same image on the display for too long.

Use the clear command to clear it:

python control.py clear

I set up a cron job (crontab -e) to update the image two times per day, but keep in mind this can end up costing a non-trivial amount:

0 8 * * * cd ~/src/sol-mate-eink && .venv/bin/python control.py show Barcelona
0 18 * * * cd ~/src/sol-mate-eink && .venv/bin/python control.py show Barcelona
0 2 * * * cd ~/src/sol-mate-eink && .venv/bin/python control.py clear

(You'll need to tweak the paths for your setup, of course.)

Backend

Feel free to use the private API I hosted to get the weather if you're not going to hammer it. I also use this backend for my GPT. However, if you have high volume ideas in mind, please self-host it! The source code is here:

https://github.com/blixt/sol-mate

Having issues?