/rmqcpp

A batteries included C++ RabbitMQ Client Library/API.

Primary LanguageC++Apache License 2.0Apache-2.0

rmqcpp - A C++ library for RabbitMQ

Menu

Rationale

rmqcpp provides a testable, data-safety-focused and async-capable API that strives to be easy to use.

Out of the box, rmqcpp will never silently drop messages, and will always reconnect.

Features

This library has been built from experience learned while supporting other RabbitMQ libraries for many years. Using rmqcpp straightaway ticks a lot of boxes in our internal RabbitMQ best practices, as well as those suggested by CloudAMQP, and AWS.

  1. ❤ Heartbeats are always enabled, and they are handled in the background.
    • Heartbeats catch many network faults, yet some applications avoid them because existing libraries make heartbeats hard to implement. rmqcpp has these implemented out of the box.
  2. 🔁 Out-of-the-box reconnection logic
    • Clients using rmqcpp do not need to implement any retry logic. The library will attempt to reconnect in the background forever. This aims to improve recovery times after network outages.
  3. 🏔 Topology declaration as part of Connection
    • rmqcpp always declares topology when creating consumers & producers, as per RabbitMQ best practices.
  4. ✉ Reliable Message Delivery 'on' by default
    • Publisher confirmations. This ensures clients are aware when messages are owned by RabbitMQ, and avoids messages being silently black holed.
    • Consumer acknowledgements. Switching these on manually helps avoid messages being silently dropped during restart/outages, as would be the case with 'autoack'.
    • Durable queues and persistent delivery mode ensure messages always persist during broker restarts and total datacenter shutdowns.
    • Mandatory flag is defaulted to 'true' for all messages to ensure none are silently dropped due to missed bindings.
    • All of the above properties are used by default. Publisher confirms and consumer acknowledgements are required.
  5. 🚦 Publishing and Consuming happens on different connections
    • A common application pitfall is to consume & produce on the same connection. This can cause slow-downs in consumption rate, as RabbitMQ applies backpressure to fast publishers - depending on the exact queues being consumed/published from this can cause a vicious cycle.
  6. ✂ Reconnect cancelled consumers
    • Very occasionally, RabbitMQ consumers are cancelled by the broker. This case is rarely implemented properly when using other libraries. rmqcpp will redeclare any consumers that have been cancelled.

Library structure

rmqcpp is made up of a library which builds to librmq.a. Internally, this library contains a hierarchy of packages, of which rmqa, rmqt, and rmqp are the public-facing packages.

Internal packages

graph TD;
    rmqamqpt-->rmqt;
    rmqamqp-->rmqamqpt;
    rmqamqp-->rmqio;
    rmqamqp-->rmqt;
    rmqio-->rmqamqpt;
    rmqa-->rmqamqp;
    rmqa-->rmqt;
    rmqa-->rmqp;
    rmqp-->rmqt;
Loading
Library Purpose Examples
rmqp RabbitMQ library interface (protocol) Interfaces used to allow testing/mocking of rmqcpp applications
rmqa RabbitMQ Library interface implementation The main concrete objects used by applications
rmqt Data types The currency(data types used) between rmqa/b and rmqamqp layers
rmqtestmocks gmock types Objects useful for testing applications using rmqcpp
rmqamqp AMQP abstraction layer All logic relating to amqp communication, framing, classes and state machines - connection, channel queue
rmqamqpt Low-level AMQP data types (from 0-9-1 spec) Primitives of the AMQP standard, methods, frame, amqp types to C++ types mapping
rmqio IO abstraction layer Raw socket connections management, reads/writes AMQP frames from/to the wire. Contains a set of async io interfaces, and an implementation using boost::asio

Quick Start

The quickest way to get started is to take a look at our integration tests and sample 'hello world' program, which is possible by following the Docker Build steps and then: from the interactive shell window running ./build/examples/helloworld/rmqhelloworld_producer

Usage

// Holds required threads, and other resources.
// The context must live longer than objects created from it.
rmqa::RabbitContext rabbit;

// Create topology to be declared on every reconnection
rmqa::Topology topology;
rmqt::QueueHandle q1    = topology.addQueue("queue-name");
rmqt::ExchangeHandle e1 = topology.addExchange("exch-name");

// Bind e1 and q1 using binding key 'key'
topology.bind(e1, q1, "key");

// To create an auto-generated queue
rmqt::QueueHandle q2 = topology.addQueue();
topology.bind(e1, q2, "key2");

// Each `Producer`/`Consumer` has a reference to a `Topology` object
// which can be updated with updateTopology.
bsl::shared_ptr<rmqa::VHost> vhost = rabbit.createVHostConnection(
    "my-connection",
    bsl::make_shared<rmqt::SimpleEndpoint>(
        "localhost", "rmqcpp", 5762),
    bsl::make_shared<rmqt::PlainCredentials>(
        "guest", "guest")); // returns immediately

// Get a producer
// How many messages can be awaiting confirmation before `send` blocks
const uint16_t maxOutstandingConfirms = 10;

rmqt::Result<rmqa::Producer> producerResult = vhost->createProducer(topology, e1, maxOutstandingConfirms);

if (!producerResult) {
    // handle errors.
    bsl::cout << "Error creating connection: " << producerResult.error();
    return -1;
}

bsl::shared_ptr<rmqa::Producer> producer = producerResult.value();

void receiveConfirmation(const rmqt::Message& message,
                         const bsl::string& routingKey,
                         const rmqt::ConfirmResponse& response)
{
    if (response.status() == rmqt::ConfirmResponse::ACK) {
        // Message is now guaranteed to be safe with the broker
    }
    else {
        // REJECT / RETURN indicate problem with the send request (bad routing
        // key?)
    }
}

bsl::string json    = "[5, 3, 1]";
rmqt::Message message(
    bsl::make_shared<bsl::vector<uint8_t> >(json.cbegin(), json.cend()));

// `send` returns immediately unless there are `maxOutstandingConfirms`
// oustanding messages already. In which case it waits until at least one
// confirm comes back.
// User must wait until the confirm callback is executed before considering
// the send to be committed.
const rmqp::Producer::SendStatus sendResult =
    producer->send(message, "key", &receiveConfirmation);

if (sendResult != rmqp::Producer::SENDING) {
    // Unable to enqueue this send
    return -1;
}

// Consumer callback
class MessageConsumer {
  private:
    bool processMessage(const rmqt::Message& message)
    {
        // process Message here
        return true;
    }

  public:
    void operator()(rmqp::MessageGuard& messageGuard)
    {
        if (processMessage(messageGuard.message())) {
            messageGuard.ack();
        }
        else {
            messageGuard.nack();
            // Would automatically nack if it goes out of scope
        }
    }
};

rmqt::Result<rmqa::Consumer> consumerResult =
    vhost->createConsumer(
        topology,            // topology
        q1,                  // queue
        MessageConsumer(),   // Consumer callback invoked on each message
        "my consumer label", // Consumer Label (shows in Management UI)
        500                  // prefetch count
    );

if (!consumerResult) {
    // An argument passed to the consumer was bad, retrying will have no effect
    return -1;
}

bsl::shared_ptr<rmqa::Consumer> consumer = consumerResult.value();

// Shutdown

// Blocks until `timeout` expires or all confirmations have been received
// Note this could block forever if a separate thread continues publishing
if (!producer->waitForConfirms(/* timeout */)) {
    // Timeout expired
}

consumer->cancelAndDrain();

Documentation

Doxygen generated API documentation can be found here

Building

Prerequisites

These prerequisites can be skipped when using the docker build environment. Otherwise it is important to set these up.

vcpkg is the primary prerequisite for building rmqcpp. Follow the instructions here and set the environment variable VCPKG_ROOT to the install location, i.e. export VCPKG_ROOT=/build/vcpkg.

There are build configuration options which can be specified using the environment variable CMAKE_PRESET (choose from configurations in CMakePresets.json) - eg. export CMAKE_PRESET=macos-arm64-vcpkg.

Build Steps

Once the prerequisites are configured:

Build the project and run the tests from your source root directory using the following commands:

  1. make init - Initialize your build environment using the configured cmake and vcpkg setup - see above.
  2. make - Incremental build and run the tests.
  3. make build - Incremental build.
  4. make unit - Run built unit tests.

Docker Build

We also provide Dockerfiles for building and running this in an isolated environment. If you don't wish to get vcpkg set up on your build machine, this can be an alternative quick way to get started.

  1. make docker-setup - Build required base images and setup vcpkg, prerequisite for running commands below
  2. make docker-build - Build rmqcpp in the container using vcpkg
  3. make docker-unit - Build rmqcpp and run unit tests in the container
  4. make docker-shell - Get an interactive shell within the build environment container

Installation

At present, we do not provide any pre-built releases and we expect users to build from source. If you are interested in having a pre-built release for your preferred package management system, please open an issue to let us know.

Using rmqcpp in your Application

With vcpkg

  1. Add rmqcpp in your vcpkg.json file to specify dependency:
{
    "$schema": "https://raw.githubusercontent.com/microsoft/vcpkg-tool/main/docs/vcpkg.schema.json",
    "name": "testproj",
    "version": "1.0.0",
    "dependencies": [
      "rmqcpp"
    ]
}
  1. In your CMakeLists.txt add find_package(rmqcpp REQUIRED) - which will install rmqcpp with all its dependencies.

  2. Use the namespace rmqcpp:: to link to the library, for example - target_link_libraries(testproj PUBLIC rmqcpp::rmq)

With git submodule

Setup your project with a git submodule to this repository:

$ tree
.
`-- myapplication
|   |-- CMakeLists.txt
|   |-- main.cpp
|   `-- rmqcpp
|   |   |-- CMakeLists.txt
|   |   |-- CMakePresets.json
|   |   |-- CONTRIBUTING.md
|   |   |-- LICENSE
|   |   |-- Makefile
|   |   |-- README.md
|   |   |-- ...
|   |-- vcpkg.json

Sample CMakeLists.txt:

cmake_minimum_required(VERSION 3.25)
project(myapp)

find_package(bal REQUIRED)
add_subdirectory(rmqcpp)

add_executable(myapplication main.cpp)

target_link_libraries(myapplication rmq bal)

Example cmake command to configure this application build:

$ cmake -DCMAKE_TOOLCHAIN_FILE=${VCPKG_ROOT}/scripts/buildsystems/vcpkg.cmake -DCMAKE_INSTALL_LIBDIR=lib64 -DCMAKE_CXX_STANDARD=17 ..

Contributions

We ❤️ contributions.

Have you had a good experience with this project? Why not share some love and contribute code, or just let us know about any issues you had with it?

We welcome issue reports here; be sure to choose the proper issue template for your issue, so that we can be sure you're providing the necessary information.

Before sending a Pull Request, please make sure you read our Contribution Guidelines.

License

Please read the LICENSE file.

Code of Conduct

This project has adopted a Code of Conduct. If you have any concerns about the Code, or behavior which you have experienced in the project, please contact us at opensource@bloomberg.net.

Security Vulnerability Reporting

Please refer to the project Security Policy.