Get data from USB-connected UPS into InfluxDB using Telegraf
Transforms upsc
output like this:
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 3133
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 13.1
battery.voltage.nominal: 12
..into InfluxDB Line Protocol like this:
ups battery.charge=100,battery.charge.low=10,battery.charge.warning=20,battery.mfr.date="CPS",battery.runtime=2970,battery.runtime.low=300,battery.type="PbAcid",battery.voltage=13.1,battery.voltage.nominal=12
Edit the script cmd
variable to reflect your setup. Specifically, change 'ups' to whatever you named your UPS in NUT
or upsd
. Add any additional measurement names that your UPS provides to the string_measurements
array (in sorted order) so they will be included in the output.
To see all the measurements your UPS provides, run this:
upsc YOUR_UPS_NAME_HERE 2>/dev/null | awk -F':' 'BEGIN {print "string_measurements=["} {print "\"" $1 "\", "} END {print "]"}' |tr -d '\n'
Call the script from telegraf.conf
like this
[[inputs.exec]]
commands = ["python /path/to/getUpsData.py"]
timeout = "5s"
data_format = "influx"
Tested on:
- Cyberpower CP1000AVRLCDa
- MGE Pulsar 2200
If you're using this with a different UPS, please let me know so I can add it to the list
Thanks to the following for helping improve this repo.
- @openincident
- @mattster98