Welcome to the VzBoT UserMods repository, here you may find community mods for the VzBoT 3D-printer.
Remember to update this README when uploading new mod!
There is a contributing guide available here.
Create a folder containing your name (without spaces) and create a folder for your mod(s).
Suggested directory layout for your mod:
- creator_name/
- mod_name/
- README.md with a description, optionally build instructions and required parts
- stl/ folder with stereolithographical models, oriented correctly for printing
- cad/ folder with original design files (STEP, F3D, Scad, etc.) (optional)
- doc/ folder with supported documentation (optional)
- images/ folder with screen shots/renders/etc.
- mod_name/
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The build difficulty:
- 💚 for 💚 (Easy)
- 💙 for 💙 (Intermediate)
- ❤️ for ❤️ (Advanced)
like so:
| Creator | [Mod title](link) | ✔️/✖️ | ✔️/✖️ | Description | Difficulty
| Creator | Mod title | Description | Vz330 | Vz235 | Difficulty |
|---|---|---|---|---|---|
| example | Example mod | Example entry for the table | ✔️ | ✔️ | 💚💙❤️ |
| airox | VZ235 Tophat | A tophat for the vz235 | ✖️ | ✔️ | 💚 |
| AdderMk2 | Patch_Cura | Updates 2020 Tronxy profiles in Cura | ✔️ | ✔️ | 💙 |
| CapnKrunchy | Aluminum Z WAGO Mount | WAGO mount for Aluminum Z bed assembly | ✔️ | ✖️ | 💚 |
| catalinutzz | Hemera mount | Hemera mount for the VZ Printhead | ✔️ | ✔️ | 💚 |
| ckvsoft | CPAP_back_panel_tube_mount_VZ330 | CPAP back panel tube mount VZ330. | ✔️ | ✖️ | 💚 |
| ckvsoft | WaveShare | WaveShare 5inch DSI LCD. | ✔️ | ✔️ | 💚 |
| jpbnto | Y endstop | Y-endstop using the Tronxy XS5A switch | ✔️ | ✖️ | 💚 |
| jurisv | SLA CPAP Trihorn | CPAP Trihorn Fan ducts for SLA printers as single piece | ✔️ | ✖️ | 💚 |
| karnadi | NF Crazy front face | NF Crazy front face 2510 fan with BLTouch mount | ✔️ | ✔️ | 💚 |
| VzHextrudort pneumatic coupler | VzHextrudort pneumatic PTFE coupler | ✔️ | ✔️ | 💚 | |
| knarfie | 12mm Linear Rod | Mod for 12mm linear rods | ✔️ | ✖️ | 💚 |
| Idler Shoulder | Idler mounts with spots for shoulder bolts | ✔️ | ✖️ | 💚 | |
| Trihorn | Trihorn duct for the VZ Printhead | ✔️ | ✔️ | 💚 | |
| mdwasp | Swappable Exhaust Tube | Hot-swappable exhaust tube | ? | ✔️ | 💚 |
| panik988 | Sherpa + NF Crazy front face (bracket) | NF Crazy Face Mount with bracket for Sherpa | ✔️ | ✔️ | 💚 |
| pbsuper | VZTrident | Tripple Z for VZbot complete printer. | ✔️ | ✔️ | 💙 |
| Quickdraw | Quickdraw for Alu Printhead. | ✔️ | ✔️ | 💚 | |
| Brace_Dancer | Brace for Dancer so Fanduct can't move sideways. | ✔️ | ✔️ | 💚 | |
| Polar_Ted | VZ HextrudORT mount | VZ HextrudORT high motor mount for EVA print head and V6 hot end | ✔️ | ✔️ | 💚 |
| VZ Sexbolt Z Endstop | Sexbolt side mounted Z endstop for VZ bed frame | ✔️ | ✔️ | 💚 | |
| VZ 330 Skirt Set | VZ 3330 SKirt Set with V0 Display | ✔️ | ✖️ | 💚 | |
| X_Y_Pully_Height_Gauge | X Y pully height gauge | ✔️ | ✔️ | 💚 | |
| X_Y Motor Support | Support shelf for X and Y motors | ✔️ | ✔️ | 💚 | |
| Rac | MGN9 Gantry | MGN9 gantry | ✔️ | ✔️ | ✖️ |
| RODAM 3D | 180_Hinges | 180 Hinges for full door open | ✖️ | ✔️ | 💚 |
| 2WD_2_COLOR_SCREW_PACK | 2 color Idler with mod for screw kit | ✖️ | ✔️ | 💚 | |
| SFINAE | Rapido HF mount | Rapido HF mount for 30mm fan | ✔️ | ✔️ | 💚 |
| Skysi | Beefy X-Endstop | Beefed up Enstop for X | ✔️ | ✔️ | 💚 |
| SSerpente | Klicky probe | Klicky probe mount | ✔️ | ✔️ | 💚 |
| treintjes | Skirt | Skirt for the VZ-Bot to house electronics under the frame | ✔️ | ✖️ | 💚 |
| EduardoMDSousa | Vz-Printhead-Printed-MGN12H | Vz-Printhead-Printed-MGN12H | ✔️ | ✔️ | 💚 |
| MadduxVape | Vz330_Duet_Config | Vz330 AWD Config for Duett board | ✔️ | ✖️ | 💚 |
Credits to VoronDesign/VoronUsers