boarchuz/HULP

Issues

• ADC e Hibernación

  #38 opened 19 days ago by SCSELECTRONICS
  3

• How to tell if awake or not

  #37 opened 3 months ago by trullock
  4

• How to count capacitive touches

  #36 opened 3 months ago by trullock
  2

• HULP I2C Hardware Read Wemos Ambient Light sensor BH1750 question

  #22 opened 7 months ago by Algonsi
  5

• Question: how many time to start the ESP3 core from ULP interrupt ?

  #31 opened 7 months ago by Vorms
  4

• RTC LOW Memory limit for platformio / arduino

  #33 opened 7 months ago by ssriblo
  1

• Warning when using HULP_LBLA()

  #34 opened 7 months ago by Gfy63
  0

• I2C bitbang example gpio question

  #32 opened 10 months ago by ssriblo
  8

• How to loop through a byte array and set the gpio

  #30 opened a year ago by morcibacsi
  6

• Is HULP compatible with ESP32-S3?

  #29 opened a year ago by jlutzwpi
  2

• Measuring pulse length in milliseconds

  #24 opened a year ago by RedRambo
  5

• issue with I_GPIO_HOLD_DIS

  #28 opened a year ago by 0x0fe
  7

• support for mpu6050

  #11 opened 3 years ago by augisbud
  2

• ADC example, comparing if value is wihin a range, rather than just under a threshold

  #27 opened 2 years ago by 0x0fe
  3

• ESP32 Not Waking On I_WAKE()

  #25 opened 2 years ago by greentigeryobin
  3

• feature request: UART with parity bit

  #26 opened 2 years ago by antonmeyer
  2

• What are plans for documentation?

  #1 opened 2 years ago by standarddeviant
  10

• I2C bitbang CRC third byte does not match

  #23 opened 2 years ago by dizcza
  23

• HULP ADC read problem while wake up

  #21 opened 2 years ago by kwis2
  2

• ESP32-S2

  #7 opened 2 years ago by sedlacekdavid
  2

• Possible confrontation with some libraries

  #19 opened 3 years ago by freetoair
  7

• Variable gets a value as if the shift command had not been executed

  #18 opened 3 years ago by freetoair
  4

• Arduino ide8.16 compilation error on Mac

  #17 opened 3 years ago by ChassaB
  6

• is i2c bitbang limited to RTC GPIOs ??

  #16 opened 3 years ago by smartyfi
  2

• touch, ULP FSM instructions, without macros

  #15 opened 3 years ago by mahesh2000
  0

• How can I make this work with Arduino?

  #14 opened 3 years ago by MateoSegura
  3

• problems reading sht3x i2c sensor

  #12 opened 4 years ago by will-emmerson
  10

• Pulse counter

  #9 opened 4 years ago by laguill
  17

• undefined reference error in example code for simple debugging

  #10 opened 4 years ago by nullptrdesaster
  4

• Add librairies in Arduino ide

  #8 opened 4 years ago by laguill
  11

• Example for HX711

  #3 opened 4 years ago by adamcoulombe
  2

• Issue with Sleep of ULP

  #4 opened 4 years ago by Ankith-A-Muralidhar
  12

• ADC ULP

  #5 opened 4 years ago by juanhuarte
  1

• I2C bitbanging write 16bit

  #6 opened 4 years ago by rpopr
  3

• PlatformIO Support

  #2 opened 4 years ago by salim97
  2