Issues
- 0
- 0
2 (or more) mass calibration
#260 opened by LOUIGIAMB - 1
Error on `make build-all`
#259 opened by gamename - 2
HX711 only reads once on startup
#251 opened by Xarbenence - 4
This issue still persists.
#216 opened by jagannathmurali - 0
HX711 high current consumption
#258 opened by nobodyguy - 0
HX711 not thread safe?
#257 opened by andreash-esp - 4
Load cell value consistently rising and falling despite no load being applied.
#217 opened by diiarmuid - 0
self-calibration of load cell
#256 opened by sgvs-deloitte - 0
- 2
What are possible values for scale.set_scale(2280.f);
#254 opened by Peter-Stuhr - 0
How to check load cell is connected or not
#253 opened by swapnilnandgave - 2
Should function "scale.tare();" need a parameter?
#244 opened by mianqi2016 - 1
Multiple HX711 with one clock
#247 opened by froshyb - 1
Reason behind using D2 and D3 pins
#250 opened by pyciko - 0
warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
#248 opened by hafenhuhn1 - 2
Verify my wiring (HX711 with four strain gauges)
#246 opened by JustApu - 0
add NRF to compatible boards list
#245 opened by ultrapalace - 5
- 0
serial monitor freezes on arduino uno when data or clock from HX711 is connected to the arduino digital data pin
#243 opened by NiallMeade - 0
- 0
Arduino MKR 1010 Upload failure
#241 opened by julesmoretti - 1
- 5
- 0
Arduino 2 support
#237 opened by Giuliano69 - 0
- 14
Tare the HX711 with Fish Gripper
#228 opened by markingle - 1
Commit c646a33 introduced a bug in pull-ups
#232 opened by nschurando - 1
unsupported libraries
#230 opened by flowmeter - 0
using 4 load cells
#229 opened by Kowng - 2
- 1
Cant handel to return more than 2²⁴-1 value
#227 opened by sepehr-mnp - 3
Cryptic message in serial monitor
#212 opened by FerdZNerd - 1
- 1
- 1
Using HX711 library on Adafruit nRF52840
#223 opened by rymd80 - 0
atomic operation is unnecessary
#221 opened by bcbergmanuu - 1
Power_down
#220 opened by s56jsc - 0
Servo twitching when using HX711
#215 opened by liu1renping - 1
Can't Get Readings Faster than 450ms
#214 opened by Dreded - 0
Measurement of the liquid level
#213 opened by truXik - 1
Setting both HX711 channels (A+ / A- and B+ / B-) for using two load cells of 1kg in ESP32
#211 opened by lherreraq2UC - 2
0.7.4 seems a bit broken
#210 opened by lalitkumarj - 7
Is there something wrong with my raw data output? And I need the raw data to be a voltage
#208 opened by ariqhwr - 1
Using INB to measure excitation voltage
#209 opened by mcmahad - 1
Using HX711 for Pressure Sensor
#206 opened by Roubble - 9
Add support for Nordic NRF52840 microcontroller
#207 opened by ElecSmurf - 0
No variation in output from HX711 module
#205 opened by francescomosconi - 1
- 1