bosch-thermostat/home-assistant-bosch-custom-component

Issues

• Second developer/maintainer needed

  #414 opened 9 months ago by pszafer
  6

• Buderus CX100 support

  #415 opened 9 months ago by Chavife
  9

• HCM300 energy values to measurements

  #401 opened 10 months ago by avox24
  6

• Buderus TC100.2

  #441 opened 5 months ago by Dav00171
  2

• Buderus KM200 two solar fields

  #440 opened 5 months ago by sowinski
  0

• Buderus CT200 Firmware 05.02.00 SSL Errors

  #439 opened 5 months ago by Salvora
  0

• Support for Bosch Tronic water heater series

  #434 opened 5 months ago by tomekszy
  1

• Bosch Heatpump with K30RF Module

  #438 opened 5 months ago by jannikloehr
  2

• KM100 setup failed

  #436 opened 5 months ago by Bambie07
  1

• Please add support for the Bosch MR100i RF

  #435 opened 5 months ago by ldfandian
  1

• HA 2024.6.0: multiple warnings

  #420 opened 5 months ago by haaino
  5

• Firmware 05.02.00 on CT200

  #437 opened 5 months ago by bcoddens
  1

• Failed Setup

  #433 opened 5 months ago by u4h37u
  1

• Updated to HA 2024.8 but the integration does not get loaded

  #432 opened 6 months ago by tonypapa55
  2

• CT200 no longer available / can't be set up

  #408 opened 10 months ago by OldRon1977
  13

• CT 200 - can't change programm

  #407 opened 6 months ago by CR6-SE
  4

• No more working on 2024.8.0 due to save_json function no more available

  #431 opened 6 months ago by robertodamiani
  2

• Integration stopped working for RC300 after HA update

  #405 opened 10 months ago by gfre
  15

• Bosch CT200 new Firmware v5.00.01 is incompatible

  #402 opened 10 months ago by nevada750club
  4

• Component does not load on HA 2024.8

  #429 opened 6 months ago by rikroe
  4

• Non-thread-safe operations

  #412 opened 6 months ago by RobertAmour
  1

• NAT problem ?? What port is needed ?

  #421 opened 6 months ago by IkaSGC
  4

• Junkers FW120 with BOSCH MB LAN 2

  #430 opened 6 months ago by azanke79
  2

• Warning

  #428 opened 7 months ago by moritzmaier84
  1

• Integration error

  #426 opened 7 months ago by carlkung
  0

• Integration stops working after few hours

  #404 opened 10 months ago by mcervar
  17

• RuntimeWarning: coroutine 'BoschGatewayEntry.recording_sensors_update' was never awaited

  #411 opened 8 months ago by slovdahl
  1

• Energy stats recorder not working after update 2024.5.2

  #417 opened 9 months ago by Dejmal69
  5

• Exception in get_signals when dispatching 'bosch_signal'

  #419 opened 9 months ago by ravesw
  0

• Exception in get_signals when dispatching 'bosch_signal':

  #410 opened 9 months ago by bakboord4
  2

• Detected that custom integration 'bosch' accesses hass.helpers.dispatcher

  #409 opened 9 months ago by haaino
  5

• Junkers MBLAN no entities

  #413 opened 9 months ago by Docnight
  1

• CT200 Current Set Temp

  #398 opened a year ago by gr4emeUK
  1

• CT200: Integration stopped working after HA update 2024.9 or after update to firmware 05.00.01

  #403 opened 10 months ago by CheeseEye
  14

• Unknown Model

  #400 opened 10 months ago by the-baumis
  7

• Home page only shows logo when using ethernet connection

  #406 opened 10 months ago by Screech1
  0

• Add ETRV “start calibration” button to the home assistant integration

  #388 opened a year ago by roderik-maker
  9

• Using slower stringprep, consider compiling the faster cython/libidn one

  #399 opened 10 months ago by haaino
  1

• Unknown model

  #390 opened 10 months ago by dsoveen
  9

• Device is unknown Null

  #393 opened a year ago by schlaufon
  3

• Statistics for the 23rd hour are always missing

  #394 opened a year ago by zaupav
  8

• TLS issue on init after upgrade to Homeassistant 2024.2.0

  #387 opened a year ago by depuytnl
  53

• Failed to call service bosch/send_custom_put_string. Service call requires responses but caller did not ask for responses

  #397 opened a year ago by awegg
  0

• Error on TC100 - entities not updating

  #385 opened a year ago by masterx1981
  7

• Total working time is wrong interpreted by HA

  #389 opened a year ago by Novae7
  2

• unknown error occurred

  #386 opened a year ago by Koralci
  3

• Can't install Bosch-Thermostat

  #395 opened a year ago by chodenthalgithub
  3

• Integration not loading on startup: Can't find your fw version.

  #392 opened a year ago by JakobTewes
  4

• Integration wont load after update to HA 2024.2.2

  #391 opened a year ago by WeirdSience
  1

• Detected that custom integration 'bosch' uses save_json from homeassistant.util.json module.

  #384 opened a year ago by haaino
  1