How to measure when a customer reaches route/prefix limit in Nokia boxes.
In some scenarios you might need to identify if any customer reaches the route/prefix limit. With this repo, it can be realized automatically, and everyone will be informed with suspected customer.
TTP and Netmiko used to create this repo..
Sample config:
BGP Neighbor
Peer : 1.1.1.1 Description : (Not Specified) Group : test
Peer AS : 0 Peer Port : 0
Peer Address : 1.1.1.1
Local AS : 15000 Local Port : 0
Local Address : 0.0.0.0
Peer Type : External Dynamic Peer : No
State : Idle Last State : Idle
Last Event : none
Last Error : Unrecognized Error
Local Family : IPv4
Remote Family : (Not Specified)
Connect Retry : 120 Local Pref. : 100
Min Route Advt. : 30
Multihop : 0 (Default) AS Override : Disabled
Damping : Disabled Loop Detect : Ignore
MED Out : No MED Out Authentication : None
Next Hop Self : Disabled AggregatorID Zero : Disabled
Remove Private : Disabled
Passive : Disabled
Peer Identifier : 0.0.0.0 Fsm Est. Trans : 0
Fsm Est. Time : 13d02h12m InUpd Elap. Time : 13d02h12m
Hold Time : 90 Keep Alive : 30
Min Hold Time : 0
Active Hold Time : 0 Active Keep Alive : 0
Cluster Id : None Client Reflect : Enabled
Preference : 170 Num of Update Flaps : 0
Input Queue : 0 Output Queue : 0
Input Messages : 0 Output Messages : 0
Input Octets : 0 Output Octets : 0
snipped
MDT-Safi received : 0 RT-Constrnt received : 0
MDT-Safi active : 0 RT-Constrnt active : 0
MDT-Safi suppressed : 0 RT-Constrnt suppress*: 0
MDT-Safi rejected : 0 RT-Constrnt rejected : 0
L2-VPN received : 0 EVPN received : 0
L2-VPN active : 0 EVPN active : 0
L2-VPN suppressed : 0 EVPN suppressed : 0
L2-VPN rejected : 0 EVPN rejected : 0
Flow-IPv4 received : 0 Flow-IPv6 received : 0
Flow-IPv4 active : 0 Flow-IPv6 active : 0
Flow-IPv4 suppressed : 0 Flow-IPv6 suppressed : 0
Flow-IPv4 rejected : 0 Flow-IPv6 rejected : 0
MS-PW received : 0 BGP-LS received : 0
MS-PW active : 0 BGP-LS active : 0
MS-PW suppressed : 0 BGP-LS suppressed : 0
MS-PW rejected : 0 BGP-LS rejected : 0
SRPLCY-IPV4 received : 0 SRPLCY-IPV6 received : 0
SRPLCY-IPV4 active : 0 SRPLCY-IPV6 active : 0
SRPLCY-IPV4 suppress*: 0 SRPLCY-IPV6 suppress*: 0
SRPLCY-IPV4 rejected : 0 SRPLCY-IPV6 rejected : 0
Prefix Limits Per Address Family
Family Limit Idle Timeout Threshold Log Only Post Import
ipv4 1000000000 forever 90 Disabled Disabled evpn 10000000 forever 90 Disabled Disabled
Neighbors shown : 1