br3ttb/Arduino-PID-Library

Issues

• how to simulate the pid on PC, without actual devices

  #145 opened 4 months ago by MiKiJT
  2

• Relay example seems backwards for digitalWrite(relayPin,HIGH) == On

  #136 opened 2 years ago by drf5n
  1

• Link to documentation just takes me to the Arduino Playground homepage

  #143 opened 9 months ago by sholtob
  4

• esp32 adaptive tuning

  #140 opened a year ago by tomislav12
  2

• PonM vs PonE coeffitients

  #117 opened 3 years ago by djObsidian
  10

• Kk

  #142 opened a year ago by MohammedJo90
  0

• PID Output Relay exemple

  #141 opened a year ago by sbarabe
  2

• Proportional on measurement in PID::Compute seems to modify integral error

  #139 opened a year ago by yzhang2907
  0

• Microsecond update

  #138 opened a year ago by ChrGri
  0

• How to implement Interactive PID method with this library

  #131 opened a year ago by FelixWT
  1

• Where is version 1.2.0 ?

  #135 opened 2 years ago by anyonecan
  0

• No License File Included

  #134 opened 2 years ago by ebarrieau
  0

• Output is nan after several hours of successful running

  #118 opened 3 years ago by bellabrez
  3

• Is the calculated PID result relative to the previous value or absolute on its own?

  #122 opened 3 years ago by happymacer
  2

• When the tunings are changed, it might be good to reset the integrals.

  #125 opened 2 years ago by rtek1000
  9

• Add deadband

  #126 opened 2 years ago by mrx23dot
  1

• Is there an Overflow in PID_RelayOutput.ino?

  #130 opened 2 years ago by rtek1000
  2

• Output goes to 0 when above setpoint.

  #124 opened 2 years ago by ZachElkins
  2

• need esp32 PID example

  #128 opened 2 years ago by microElabDevelop
  5

• basic example uses analogWrite(outputpin,DOUBLE) !

  #129 opened 2 years ago by StefanL38
  6

• Is it possible to use the PID inside another class?

  #123 opened 3 years ago by studi1882
  2

• Maybe your project needs Fuzzy logic

  #119 opened 3 years ago by rtek1000
  1

• Systems with large time constant (Dead Time versus Time Constant)?

  #121 opened 3 years ago by rtek1000
  0

• Front-End download link is offline

  #120 opened 3 years ago by rtek1000
  0

• detailed documentation missing

  #105 opened 4 years ago by shepner
  6

• Error while compiling the example

  #82 opened 6 years ago by set4up
  2

• Is dynamic reconfiguration of the setpoint value supported?

  #115 opened 3 years ago by fkromer
  2

• What should I do with some mods I've made?

  #84 opened 6 years ago by MiloMindbender
  1

• Use arrays with PID library

  #113 opened 3 years ago by simeon9696
  6

• how to reset PID output value after runing

  #112 opened 3 years ago by gunaone
  4

• SetSampleTime(0) doesn't change the internal SampleTime class member

  #110 opened 4 years ago by paynterf
  15

• Min and Max output limit issue with flexible min/max values

  #101 opened 4 years ago by gryzli133
  3

• PID.Compute(); problems

  #108 opened 4 years ago by VILLO88
  0

• P_ON_M functionality doesn't seem to do what it's supposed to - same as D

  #106 opened 4 years ago by louis-potvin
  2

• Problem with Anti-windup

  #102 opened 5 years ago by xoTTabbj4
  2

• Changing sign Derivative factor

  #104 opened 5 years ago by DavyEHB
  1

• PID

  #103 opened 5 years ago by dlliulu
  0

• Trying to incorporate the PID library into a boat autopilot project

  #100 opened 5 years ago by trotamares
  1

• pid for engine speed control, does not work;-;

  #99 opened 5 years ago by joaovictor78
  3

• How to limit output depending on another variable

  #98 opened 5 years ago by mikegleasonjr
  3

• Run 2 different PID codes

  #92 opened 6 years ago by Qhergt
  5

• PID Output depends on esp8266 board version

  #95 opened 5 years ago by dmikhalsky
  1

• Using the library with different input/output

  #93 opened 6 years ago by phenotypic
  5

• Name uniqueness

  #90 opened 6 years ago by clplaneguy
  0

• PID_v1 Timers & Interrupts

  #89 opened 6 years ago by CarlP66
  3

• outputSum Intialization causes PD Controllers to have Permanent Offset

  #88 opened 6 years ago by aaron9412
  2

• Why MANUAL/AUTOMATIC?

  #86 opened 6 years ago by enjoyneering
  2

• Please add Function to Reset Integral term in PID

  #87 opened 6 years ago by yogesh-s-nanda
  1

• PID algorithm problem

  #83 opened 6 years ago by q-bird
  0

• PID library execution and wierd spikes in Signals

  #79 opened 7 years ago by KingZuluKing
  4