bradcfisher/OctoPrint-ExcludeRegionPlugin

Issues

• Printing Pauses causing blobs to show

  #52 opened 4 years ago by TWIISTED-STUDIOS
  19

• Fatal error when parsing G92 commands - 'NoneType' in AxisPosition.py

  #60 opened 3 years ago by AndrewFRC135
  1

• Improve documentation on settings for allowing removing/reducing regions.

  #78 opened a year ago by rushl
  0

• Feature Request: Invert the logic: Add "Enable area"

  #76 opened a year ago by erffrfez
  1

• Cancelling a print region while the gcode window is zoomable seems impossible - perhaps add a shortcut to do so?

  #53 opened 4 years ago by SuperRoach
  4

• Feature Request: Touchscreen Compatibility

  #75 opened 2 years ago by anonymousaga
  1

• Feature Request: Detect IDEX/dual extruder unretract in excluded region

  #74 opened 2 years ago by thigger
  0

• Feature Request: Allow initial non-extruding moves into excluded region

  #73 opened 2 years ago by bradcfisher
  0

• Objects excluded outside the drawn zone

  #62 opened 2 years ago by ASchneiderBR
  2

• Feature Request - Alter Speed in Region

  #58 opened 2 years ago by Vantiveman
  3

• Feature request - Two point definition of regions

  #63 opened 3 years ago by schleifi
  1

• Feature Request: Draw custom shape

  #61 opened 3 years ago by Ali229
  1

• Can't find the way to make the pluggin to show up under Gcode Viewer tab

  #57 opened 4 years ago by Mrdindon
  2

• Print speed not transferring to printer via OctoPrint

  #47 opened 4 years ago by sussidio
  1

• Feature Request: Rotating/stretchable Regions

  #40 opened 2 years ago by GrubbyZebra
  1

• Update fails

  #72 opened 2 years ago by j-snijder
  3

• Errors when updating from version 0.3.1

  #71 opened 2 years ago by kevman28
  4

• Transfer ownership

  #67 opened 2 years ago by katiekloss
  2

• Temperature commands are filtered out wrongly

  #68 opened 2 years ago by DanielYWoo
  0

• Install on Windows 10 Plugin not loading

  #65 opened 2 years ago by mrcsdl
  2

• Skips Layers when used

  #66 opened 2 years ago by MattLogue
  0

• Issue? Exclude Region installed, GCode View doesn't show right 5cm of build plate

  #56 opened 4 years ago by DJTay
  0

• excluding doesn't skip retract of skipped region

  #21 opened 4 years ago by harakiwi
  6

• Incompatible with OctoPrint Version 1.4.2 on Octopi 0.18.

  #54 opened 4 years ago by Hooch180
  2

• [Feature Request] Python 3 Compatibility

  #50 opened 4 years ago by IKnowNow
  2

• [Feature Request] Python 3 Compatibility

  #48 opened 4 years ago by moooooooon8
  2

• python 3.7 compatibility or newer environment

  #42 opened 4 years ago by Greathouse2005
  4

• [Feature Request] Python 3 Compatibility

  #46 opened 4 years ago by apresa
  2

• [Feature Request] Python 3 Compatibility

  #45 opened 4 years ago by ktingey1
  2

• [Feature Request] Python 3 Compatibility

  #44 opened 4 years ago by ktingey1
  2

• [Feature Request] Python 3 Compatibility

  #43 opened 4 years ago by mattflynn
  2

• Python 3 compatibility

  #32 opened 4 years ago by Idus
  6

• [Feature Request] Python 3 Compatibility

  #51 opened 4 years ago by ido-nl
  0

• [Feature Request] Python 3 Compatibility

  #49 opened 4 years ago by hbar98
  0

• Feature request: Add ability to process exclusions to new gcode file without printing

  #29 opened 5 years ago by bradcfisher
  0

• [Feature Request] Python 3 Compatibility

  #38 opened 4 years ago by ironator
  1

• Enhancement: Tie into the Cost Estimation Tool/Filament Manager

  #34 opened 4 years ago by IIAIronWolf
  1

• Feature request: remove all regions

  #35 opened 4 years ago by nhendin
  1

• Python 3.6

  #36 opened 4 years ago by Brebinator
  2

• [Feature Request] Python 3 Compatibility

  #37 opened 4 years ago by LordTompa
  2

• Feature request: Automatically retract when entering an excluded region

  #22 opened 6 years ago by Treez97
  2

• Slows down serial communication since Octoprint 1.3.12

  #30 opened 5 years ago by cmock
  7

• Feature Request: Allow to exclude n layers on vertical axis ∴ Resume Prints

  #25 opened 5 years ago by adamlove86
  1

• Blobs when large portions are excluded.

  #27 opened 5 years ago by RedLightning42
  4

• Installed and enabled, but doesn't show up

  #23 opened 5 years ago by kazooless
  4

• Region modification is limited

  #20 opened 5 years ago by Charly333
  3

• [QUESTION] Deleting excluded regions

  #19 opened 5 years ago by kz2327
  5

• exclude region filters G3 and G4 commands

  #18 opened 5 years ago by NatroNx
  9

• Request: Turn down verbosity of console

  #26 opened 5 years ago by paukstelis
  4

• Can't Delete Region

  #24 opened 5 years ago by Fabriluc
  2