bradkeifer/hikvision_next

Home Assistant integration for Hikvision NVRs and IP cameras

Hikvision Next

The Home Assistant integration for Hikvision NVRs and IP cameras. Receives and switches detection of alarm events.

Features

• Camera entities for main and sub streams
• Real-time Acusense events notifications through binary sensors and HA events (hikvision_next_event)
• Switches for Acusense events detection
• Switches for NVR Outputs
• Holiday mode switch (allows to switch continuous recording with appropriate NVR setup)
• Tracking Alarm Server settings for diagnostic purposes
• Basic and digest authentication support

Supported events

• Motion
• Video Tampering
• Video Loss
• Scene Change
• Intrusion (Field Detection)
• Line Crossing
• Region Entrance
• Region Exiting
• NVR Input Triggers

NOTE Events must be set to alert the surveillance center in Linkage Action for HA to be notified. An attribute on the event switch shows if this is set.

Preview

The scope supported features depends on device model, setup and firmware version.

Installation

With HACS

1. This integration you will find in the default HACS store. Search for Hikvision NVR / IP Camera on HACS / Integrations page and press Download button
2. on Settings / Devices & Services page press + Add Integration
3. Search for Hikvision NVR / IP Camera and add your Hikvision device using config dialog, repeat the last 2 steps for more devices

Manual

1. copy custom_components/hikvision_next folder into conifg/custom_components
2. restart Home Assistant
3. on Settings / Devices & Services page press + Add Integration
4. search for Hikvision NVR / IP Camera and add your Hikvision device using config dialog, repeat the last 2 steps for more devices

Hikvision device setup checklist

• Network settings
  • enabled ISAPI access
• User Management - create user with permissions:
  • Remote: Parameters Settings
  • Remote: Log Search / Interrogate Working Status
  • Remote: Live View
• Events
  • Notify Surveillance Center
  • Regions if needed
  • Arming Schedule
• Storage Schedule Settings - set continuous recording in Holiday mode for desired cameras
• Alarm Server - IP address of Home Assistant instance for event notifications. Can be set manually or by this integration if checked Set alarm server checkbox in the configuration dialog. It will be reverted to http://0.0.0.0:80/ on integration unload.

Reporting issues

There are a lot of Hikvision devices with different firmawers in the world. In most cases logs are crucial to solve your problem, so please attach them to the report. Keep in mind that logs include MAC addresses, serial numbers and local IP addresses of your devices. Consider using pastebin.com or similar services for sharing logs.

You can also download a diagnostic output to provide essential information about your device. This redacts all sensitive data and can be provided in the github issue.

Setup log level to debug in configuration.yaml

logger:
  logs:
    custom_components.hikvision_next: debug

Restart Home Assistant

Download logs from Settings / System / Logs

Tested models

NVR

• Annke N46PCK
• DS-7108NI-Q1/8P
• DS-7608NI-I2
• DS-7608NI-I2/8P
• DS-7608NXI-I2/8P/S
• DS-7608NXI-K1/8P
• DS-7616NI-E2/16P
• DS-7616NI-I2/16P
• DS-7616NXI-I2/16P/S
• DS-7716NI-I4/16P
• ERI-K104-P4

DVR

• iDS-7204HUHI-M1/P
• iDS-7204HUHI-M1/FA/A

IP Camera

• DS-2CD2047G2-LU/SL
• DS-2CD2087G2-LU
• DS-2CD2155FWD-I
• DS-2CD2346G2-IU
• DS-2CD2386G2-IU
• DS-2CD2387G2-LU
• DS-2CD2425FWD-IW
• DS-2CD2546G2-IS
• DS-2CD2747G2-LZS
• DS-2CD2785G1-IZS
• DS-2CD2H46G2-IZS (C)
• DS-2CD2T87G2-L
• DS-2CD2T87G2P-LSU/SL
• DS-2DE4425IW-DE (PTZ)
• Annke C800 (I91BM)