Target hardware:
- Any STM32F407/405/417/415 based boards with 8/25MHz oscillator
Pinout:
| PIN/PINS | DESCRIPTION |
|---|---|
| PC10 | STATUS LED |
| PA2/PA3 | TX/RX CAN1 LED |
| PC6/PC7 | TX/RX CAN2 LED |
| PB8/PB9 | CAN1 RX/TX |
| PB5/PB6 | CAN2 RX/TX |
| PB14/PB15 | USB HS DM/DP |
| PA11/PA12 | USB FS DM/DP* |
Features:
- Works out of the box in Linux
- Works with Linux PCAN-View ( needs to install PEAK Linux drivers )
- Works with BUSMASTER and PEAK PCAN-View in Windows
Limits:
- PRO FD firmware does not support FD frames cause bxCAN not supports it, but it will works with classic CAN
- Some protocol specific messages not implemented yet
- Be sure to use PB14/PB15 pins for USB if you wants PRO/PRO FD
Toolchain:
- GNU Arm Embedded Toolchain
Tips:
- PRO FD firmware has better performance on windows ( due internal PEAK driver implementation )
Build:
- PCAN PRO firmware
make proonly forUSB HS - PCAN PRO FD firmware
make pro_fdonly forUSB HS - PCAN FD firmware
make fdsupports byUSB FS/HS - PCAN FD firmware for HEX-V2 HW
make fd TARGET_CRYSTAL=25 TARGET_USB_ID=FS TARGET_VARIANT=HEXV2_CLONE
- Become a Patron!
- Bitcoin (P2WPKH): bc1qstnsjqu2kw9v2axens54ycegn3stwvluq7ze5j
WTFPL