brandoncc/butler.nvim

butler.nvim

Butler is a tool that allows you to easily start and stop a predefined list of processes based on your working directory. I created it because I started using ThePrimeagen's git-worktree.nvim plugin and it made my previous tmux workflow more or less impossible to use.

When switching worktrees, I need my servers to be running from the correct directories. If I don't kill them and restart them from the new worktree directory, they continue serving code from a previous worktree that I'm not working with at the moment.

Installation

Install using your favorite plugin manager. For example in vim-plug:

" butler.nvim depends on processes.nvim
Plug 'brandoncc/processes.nvim'
Plug 'brandoncc/butler.nvim'

Plugin configuration

Defaults

The plugin has the following default configuration:

local config = {
  -- Signals to send to the process to kill it, starting on the left.
  kill_signals = { 'TERM', 'KILL' },

  -- Each signal is given the kill_timeout length of time in seconds to exit
  -- before trying the next signal.
  kill_timeout = 1,

  -- If you would like to see messages such as "Killing process 123 with signal
  -- TERM", enable this.
  log_kill_signals = false,

  -- Butler currently supports tmux and native neovim terminals.
  interface = 'native'
}

Customization

You can customize the plugin with the setup() function:

lua require("butler").setup({ kill_timeout = 0.5 })

Configuration file

Butler is configured using a json file that is located at $HOME/.config/butler.nvim/config.json (pull requests to improve flexibility are welcome).

Structure

Paths are expanded using the vim expand() function, so $HOME, ~, etc work as expected.

{
  "$HOME/dev/project-a": [
    {
      "name": "dev server",
      "cmd": "bin/server"
    },
    {
      "name": "dev repl",
      "cmd": "bin/console"
    }
  ],
  "$HOME/dev/project-b": [
    {
      "name": "dev server",
      "cmd": "bin/other-server"
    }
  ],
  "$HOME/dev": [
    {
      "name": "work timer",
      "cmd": "timer"
    }
  ]
}

Nesting

Project paths can be nested, and all paths which match (are a substring of) your current working directory will be used. This is particularly useful with worktrees since you can use your bare repo directory in the configuration and all worktree subdirectories will inherit the processes. You can also set processes for specific worktrees by adding configurations for their exact paths.

In the configuration example above, the following is a list of the servers that will be started for different working directories:

~/dev/project-a

• bin/server
• timer

~/dev/project-b

• bin/other-server
• timer

~/dev/project-c

• timer

Usage

Starting project servers

Processes are started in specially-marked buffers. When stopping processes, butler looks for these specially-marked buffers, not buffers that happen to be running the same command.

That means butler will stop any process running in these specially-marked buffers, even if it isn't the process that butler originally started.

This also means you can run the same command in a different terminal buffer and butler will not stop it. Butler only stops processes in buffers it creates.

lua require("butler").start()

Stopping project servers

Stopping servers kills their processes and then deletes their buffers. The processes are stopped using the kill signals provided in the configuration. The signals are each tried until the process is successfully killed or there are no more signals to try.

lua require("butler").stop()

Restarting project servers

Restarting servers stops them, which deletes their buffers, and then starts new ones. If you have changed your working directory (with worktrees, for example), the new servers will be running in the new working directory.

lua require("butler").restart()

With git-worktree.nvim

I have the following configuration for git-worktree.nvim:

local Worktree = require("git-worktree")

Worktree.on_tree_change(function(op)
  if op == Worktree.Operations.Switch then
    require("butler").restart()
  end
end)

This configuration has the effect of starting servers the first time you enter a worktree, and restarting them as you move into other worktrees.

Jumping to processes

Each interface provides its own way to jump to processes, which can be accessed with:

lua require("butler").processes()

Native interface

When using the native interface, a telescope picker is provided to assist in jumping between processes. If telescope is not installed, the processes() function simply say that.

tmux interface

When using the tmux interface, the tmux choose-tree command is used to assist in choosing a process. The interface is filtered so that only butler-managed tmux panes are shown.

Interfaces

Butler can be easily extended by adding more interfaces. At this time, there are two interfaces: 'native' and 'tmux'.

Directory structure

The main interface file should be located at lua/butler/interfaces/your-interface.lua. For this file name, you would use:

lua require("butler").setup({ interface = 'your-interface' })

Required API

Interfaces must return a table which has :new(fn) defined on it, with the following structure:

{
  start_servers: function(commands),
  stop_servers: function(),
  is_available: function(),
}

start_servers

start_servers() will be called with the commands from your json config that match the current working directory. The list will contain the full command table for each, not just the command.cmd strings.

stop_servers

stop_servers() should stop any processes that the interface started, and do any necessary cleanup.

is_available

is_available() should return a boolean that lets butler know if the interface can be used. For example, the tmux interface is not available if neovim is not running within a tmux session.

The function can optionally return a second value which is a string containing a message that will be displayed to the user when the interface is unavailable. If provided, it is displayed to the user as "[your message], butler is falling back to native".

If no message is provided, the default message to the user is "[interface name] is not available, butler is falling back to native".

:new

When the function that gets passed to :new() is called, it returns a copy of the latest butler config. This config contains any values set with require("butler").setup(), regardless of when setup() was called.

Optional API

If you would like your interface to offer a way to jump to processes that butler is managing, you can also export a function on your interface table called choose_process(). This function is called by require("butler").processes().

Minimal example

A minimal interface example is available here.

Contributing

If you have any ideas how the plugin could be improved or extended, please open an issue so we can discuss them. Contributions are welcome!