WipperSnapper Boards - Hardware Description Models for Adafruit IO WipperSnapper

This repository contains Adafruit and user-submitted description models of hardware for use with Adafruit.io.

These hardware description models (HDMs) are similar in concept to IoT "digital twins", virtual representations of physical development boards. They contain everything Adafruit.io needs to know about the device connecting to it.

Contributing

If you do not see the board you want to use with Adafruit IO on this repository, follow this how-to guide on the Adafruit Learning System for full instructions about adding a board to this repository.

https://learn.adafruit.com/how-to-add-a-new-board-to-wippersnapper/overview

What is a hardware description model?

A hardware description model (HDM) describes the contents (information, properties, physical components) of a development board.

Information

Information related to the hardware including the hardware's name, description and unique identifiers.

Property	Required	Data Type	description
boardName	Yes	String	Hardware name
mcuName	Yes	String	Microcontroller name
mcuRefVoltage	Yes	Float	Microcontroller's maximum voltage reference, in Volts.
displayName	Yes	String	Adafruit IO Device name
description	No	String	Device description
productURL	Yes	String	Link to board's homepage.
documentationURL	Yes	String	Link to board's documentation.

Naming Scheme, boardName

A boardName MAY ONLY contain lower case ASCII letters, numbers, and the dash character (“-”).

Components

Components are ports such as digital pins or analog pins. These components are defined within the components array.

Each hardware component is defined by adding the following to the .json description file:

Property	Required	Data Type	description
name	yes	string	Component type. Components connected to hardware externally are prefixed by `external_`
displayName	yes	string	Human-readable display name for Adafruit IO
dataType	yes	string	Expected data type from component
max_resolution	no	int16	Max resolution of an analog component, in bits

The following properties are set by the WipperSnapper web application. You do not need to define these values:

Property	Required	Data Type	description
mode	no	int16	Component mode. See `mode` for type descriptions.
direction	no	bool	Defines the direction of a component, either input (`0`) or output (`1`).
pull	no	bool	Defines the pull direction of a component, either up (`0`) or down (`1`).
period	no	float	Number of milliseconds between measurements.

Sensor Components

I2C Components

Hardware exposing the I2C bus may add an i2cPorts array to its HDM.

The following HDM snippet defines an I2C interface on port 0 with a SDA GPIO pin of 34 and a SCL GPIO pin of 33.

"i2cPorts": [
    {
        "i2cPortId": "0",
        "SDA": 34,
        "SCL": 33
    }
],

Examples

Example hardware descriptions can be found in the boards/ directory.

Limitations

The Adafruit IO WipperSnapper Firmware currently supports the following microcontrollers with a WiFi network interface: ESP8266, ESP32, ESP32-S2, ESP32-S3, SAMD51, SAMD21.

brentru/Wippersnapper_Boards