This library is a set of classes for use with the excellent USB sensing and controller devices available for sale on phidgets.com. If you’re a ruby programmer and need to interface your code with meat-space concerns, these devices (and this library) are what you need.
Phidgets are well supported on almost any operating system, and require practically no knowledge of electrical engineering or digital circuitry. Each device is a stand- alone “plug and play” building block that works on it’s own , or in conjunction with other phidgets.
You can browse the phidget product catalog on www.phidgets.com.
As of this writing, this gem is stable, and actively tested on:
-
x86_64 on OS X
-
x86_64 on Linux
-
armv6l on Linux
Presumably most other UNIX variants will work just fine. Probably win32/win64 will not.
As of the most recent version of this library, we support the following phidgets:
-
Phidget Spatial
-
Phidget GPS
-
Phidget Interface Kit
-
Phidget Advanced Servo
If you have a phidget that’s not on the compatibility list, either buy me a copy of the phidget you need support for, or check out the existing modules for a reference in setting up your own class, and push your changes to my repo. Most of the difficult work is done, and you’ll find plenty of stubs to work with for nearly all the available phidgets.
Though encompassing, Phidgets-FFI is seemingly quite buggy, and a bit slow. Particularly with Garbage collection turned on. I think that the threading model of the Phidgets C API is simply incompatible with the design of the ruby-ffi library. Additionally, running the ffi gem on arm environments is outright unusable.
Caveats aside, the Phidgets-FFI library interfaces are elegant and well thought-out, and this library’s interfaces (and even this README) are heavily influenced by them. Converting your existing code base to use this library shouldn’t be too difficult.
The Phidgets-FFI library has a number of methods which accept blocks. This library has none. Maybe that will change in the future.
There are currently no plans to support event-driven interfaces. Though this was an excellent feature of the ffi library, it adds a significant degree of complexity to a stable implementation of this library. Indeed, most of the stability issues arise when attempting to use these features in the ffi implementation.
Additionally, the phidgets-ffi implementation is a little strange with it’s support of device disconnects and reconnects. Here in the ‘native’ implementation, once a device object is created, it stays ‘active’ regardless of whether the device is attached. If the device is disconnected and reconnected, your phidget object will automatically re-register its handlers with the device, and continue to function as if the device were never disconnected to begin with. Keep in mind that any attributes relating to the device’s capabilities (mostly those in the PhidgetsNative::Device class, though there are things like the axial extents in the spatial object) will be ‘cached’ from the previous connection. “State” attributes (such as the spatial’s accelerometer output) will return nil or 0.
In practice, if you need an event-driven model for your code, you can almost certainly get by using a ruby thread with a polling loop, like so:
is_fixed_last = false @poller = Thread.new(PhidgetsNative::GPS(12345)) do |gps| gps.wait_for_attachment(10000) begin on_fixed_change(gps.is_fixed) if is_fixed_last != gps.is_fixed is_fixed_last = gps.is_fixed? end while sleep(0.1) end # Carry on with the rest of your code here
I’m fairly certain that until ruby supports actual kernel-based threads, this is the best you can reasonably do. Maybe we’ll emulate the ffi library in this capacity at some point in the future, if there’s a demand to do so.
First, we need to set up the proper environment and get the necessary files off the Phidgets website. Visit the drivers section at www.phidgets.com and get the latest Phidget driver for your system.
We also recommend that you read the following reference materials:
-
The User Guide for your device
The RubyDoc API manual contains calls and events for every type of Phidget and can be used as a reference. You can find a high level discussion about programming with Phidgets in general on the General Phidget Programming page. The user guide for your device also contains an API section that describes limitations, defaults, and implementation details specific to your Phidget.
To install:
gem install phidgets_native
phidgets_native is very self contained. There’s no dependencies on other ruby gems or non-standard libraries. However, in order to compile this gem, you’ll need a suitable build environment for your system (clang on OSX or gcc on Linux), and the aforementioned phidgets driver.
Before you can use the Phidget, you must include a reference to the phidgets_native gem:
require "rubygems" require "phidgets_native"
Afterwards, Phidgets can be instantiated by creating the appropriate device class object, with the device serial number passed to its constructor. At the moment, only the ‘local’ devices are supported. If there’s enough interest (or contributors) I may add support for the ‘remote’ protocols which allow you to open a device via its computer’s IP address.
spatial = PhidgetsNative::Spatial.new 54321
The object name for any type of Phidget is listed in the API manual. Every type of Phidget also inherits functionality from the Phidget base class (Which cannot be instantiated by itself directly).
If you don’t know the serial number of the device you’re looking for, you can use the Phidget.all method to return an array of the currently connected Phidgets and/or you can simply run the included list_all.rb example.
One important thing to remember is that when working with Phidgets, a local connection will reserve the device until closed. This prevents any other instances from retrieving data from the Phidget, including other programs.
All devices support the accessors defined in the PhidgetsNative::Device class from which they inherit.
Simply calling the constructor does not guarantee you can use the Phidget immediately. The constructor merely sets up the Phidget handlers and event hooks, but does not block the interpreter while it waits for the device to register. For most people, you’ll want immediate access to the phidget after the class has been instantiated. As such, you’ll need to call the wait_for_attachment method on your new instance in order to start accessing the device properties.
The wait_for_attachment method will block until a connection is made to the Phidget or until the provided timeout is exceeded.
ifkit = PhidgetsNative::InterfaceKit.new 24680 # halt the program for up 20000 microseconds or until the Phidget is connected: ifkit.wait_for_attachment 20000
Though optional, it’s recommended that you call close when you’re done using your phidget or when quitting your program.
ifkit.close
Multiple Phidgets of the same or different types can easily be run inside the same program. However, there is seemingly a six-device limit, which is imposed by the Phidget API and/or hardware.
The phidget api has built in debug logging which can be enabled on a global basis for all devices. By default, logs are sent to STDOUT, but you can optionally pass a path to a text file where output can alternatively be redirected.
PhidgetsNative.enable_logging!(:verbose) PhidgetsNative.log :info, "My favorite color is chartreuse" PhidgetsNative.disable_logging!
Note that you can also use the log method to send your own messages to the logger, if you think you have something you need to add.
-
Added orientation tracking code to the Spatial sensor via the Madgwick AHRS library
-
Fixed compile issues on ARM
-
Added dual-ratiometric mode features and interfaces to the InterfaceKit
-
Added support for all api functions of the AdvancedServo Phidget
-
Added support for all api functions of the InterfaceKit Phidget
-
First gem release, supporting all api functions of the Spatial & GPS Phidgets