camera keeps going on off recording mode

Question

camera keeps going on off recording mode

Closed this issue 4 years ago · 9 comments

i have camera that keeps going on and off motion mode (showing recording on/off)

Answer 1 · 2021-04-01T06:21:22.000Z

switch is every minute on/off

Answer 2 · 2021-04-01T06:53:15.000Z

Issue #14 and this one are caused by the same. The IO module looses connection to your SecuritySpy instance. I am not absolutely sure why. I need time with the Family during the Easter holidays, so I will look at this as soon as I have time.

Answer 3 · 2021-04-01T06:57:01.000Z

Thanks I will try to dig more JuanMa

…

El 1 abr 2021, a las 8:53, Bjarne Riis ***@***.***> escribió: Issue #14 and this one are caused by the same. The IO module looses connection to your SecuritySpy instance. I am not absolutely sure why. I need time with the Family during the Easter holidays, so I will look at this as soon as I have time. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Answer 4 · 2021-04-01T08:52:52.000Z

hope you will have nice time with your family, just to keep u informed and i dont forget to tell you, i turn on record motion and actions but only record motion is the one wich is keeping turning on/off constantly, also i have other cameras and they dont have this behaviour.

Answer 5 · 2021-04-01T11:20:33.000Z

I just checked the Log on my test system, that has been running since I released V1.0 and I have no errors or warnings in the log file. So it could be a local thing with that camera you are having issues with. Is the camera you are having issues with, different from the others that run fine? Other HW, networked in a different way (wireless instead of cable) or any other things that sets this camera a part from the others?

And thanks - wife is just out, so I had an hour to look at things 😁

Answer 6 · 2021-04-01T12:44:31.000Z

Al cameras are The same, wifi conected and SecuritySpy don’t see any problems. Very strange issue JuanMa

…

El 1 abr 2021, a las 13:20, Bjarne Riis ***@***.***> escribió: I just checked the Log on my test system, that has been running since I released V1.0 and I have no errors or warnings in the log file. So it could be a local thing with that camera you are having issues with. Is the camera you are having issues with, different from the others that run fine? Other HW, networked in a different way (wireless instead of cable) or any other things that sets this camera a part from the others? And thanks - wife is just out, so I had an hour to look at things 😁 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Answer 7 · 2021-04-01T15:11:59.000Z

If you want me to make some tests just tell me

…

On Thu, Apr 1, 2021 at 2:44 PM Dive Master ***@***.***> wrote: Al cameras are The same, wifi conected and SecuritySpy don’t see any problems. Very strange issue JuanMa El 1 abr 2021, a las 13:20, Bjarne Riis ***@***.***> escribió: I just checked the Log on my test system, that has been running since I released V1.0 and I have no errors or warnings in the log file. So it could be a local thing with that camera you are having issues with. Is the camera you are having issues with, different from the others that run fine? Other HW, networked in a different way (wireless instead of cable) or any other things that sets this camera a part from the others? And thanks - wife is just out, so I had an hour to look at things 😁 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#13 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALECS4T2Y6HN6NSFCCAXIFLTGRJI7ANCNFSM42FBTBYA> .

Answer 8 · 2021-04-10T08:31:51.000Z

Closed with V1.0.2

Answer 9 · 2021-04-10T10:25:02.000Z

brilliant job, no more error logs anymore and stable switches!!!! thanks

…

On Sat, Apr 10, 2021 at 10:32 AM Bjarne Riis ***@***.***> wrote: Closed #13 <#13>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#13 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALECS4QSN2G7W6WD6SE5B7LTIAEINANCNFSM42FBTBYA> .