OpenCanary

Thinkst Applied Research

Overview

In essence, OpenCanary creates a network honeypot allowing you to catch hackers before they fully compromise your systems. As a technical definition, OpenCanary is a daemon that runs several canary versions of services that alerts when a service is (ab)used.

Features

Receive email alerts as soon as potential threats are detected, highlighting the threat source IP address and where the breach may have taken place.

Prerequisites

Python 2.7, 3.7 (Recommended Python 3.7+)
[Optional] SNMP requires the Python library scapy
~~[Optional] RDP requires the Python library rdpy~~ (this module has been removed; we are currently determining a way forward with this.)
[Optional] Samba module needs a working installation of samba

Installation [UBUNTU]

For updated and cleaner documentation, please head over to http://opencanary.org

Installation on Ubuntu 20.04: (Please note that although we support Python 2.7; these instructions are aimed at running the Python 3 version)

$ sudo apt-get install python3-dev python3-pip python3-virtualenv python3-venv python3-scapy libssl-dev libpcap-dev
$ sudo apt install samba # if you plan to use the smb module
$ virtualenv env/
$ . env/bin/activate
$ pip install opencanary
$ pip install scapy pcapy # optional

Installation [OS X]

Installation OS X needs an extra step, as multiple OpenSSL versions may exist which confounds the Python libraries using it.

$ virtualenv env/
$ . env/bin/activate

Macports users should then run:

$ sudo port install openssl
$ env ARCHFLAGS="-arch x86_64" LDFLAGS="-L/opt/local/lib" CFLAGS="-I/opt/local/include" pip install cryptography

Alternatively, homebrew users run:

If Macbook is x86:

$ brew install openssl
$ env ARCHFLAGS="-arch x86_64" LDFLAGS="-L/usr/local/opt/openssl/lib" CFLAGS="-I/usr/local/opt/openssl/include" pip install cryptography

if Macbook is M1:

$ brew install openssl
$ env ARCHFLAGS="-arch arm64" LDFLAGS="-L/opt/homebrew/opt/openssl@1.1/lib" CFLAGS="-I/opt/homebrew/opt/openssl@1.1/include" pip install cryptography

Now the installation can run as usual:

$ pip install opencanary
$ pip install scapy pcapy # optional

Installation [GIT]

To install from source, instead of running pip do the following:

$ git clone https://github.com/thinkst/opencanary
$ cd opencanary
$ python setup.py sdist
$ cd dist
$ pip install opencanary-<version>.tar.gz

If you are looking to get OpenCanary working on OpenBSD, take a look at https://github.com/8com/opencanary.

Running OpenCanary

Please note that for the Portscan service, we have added a portscan.ignore_localhost setting which means the Opencanary portscan service will ignore (not alert on) portscans originating for the localhost IP (127.0.0.1). This setting is false by default.

OpenCanary is started by running:

$ . env/bin/activate
$ opencanaryd --start

On the first run, instructions are printed that will get to a working config.

$ opencanaryd --copyconfig

Which will create a folder, /etc/opencanaryd and a config file inside that folder opencanary.conf. You must now edit the config file to determine which services and logging options you would like to enable.

When OpenCanary starts it looks for config files in the following order:

./opencanary.conf (i.e. the directory where OpenCanary is installed)
~/.opencanary.conf (i.e. the home directory of the user, usually this will be root so /root/.opencanary.conf)
/etc/opencanaryd/opencanary.conf

It will use the first config file that exists.

Samba Setup (optional)

This is required for the smb module.

Head over to our step by step wiki over here

FAQ

We have a FAQ over here

Docker Compose

Requires Docker and Docker Compose installed.

Edit the data/.opencanary.conf file to enable, disable or customize the services that will run.
Edit the ports section of the docker-compose.yml file to enable/disable the desired ports based on the services you have enabled in the config file.
Build and run the container.

To run the latest Docker image (based on the code on a given branch) run:
```
docker-compose up -d --build latest
```
To run a Docker image based on what has been released in Pypi, run:
```
docker-compose up -d --build stable
```

To view the logs run docker-compose logs latest or docker-compose logs stable

To stop the container run docker-compose down

Docker

Requires Docker installed.

Edit the data/.opencanary.conf file to enable, disable or customize the services that will run.
Build a Docker image to run.

To build the latest Docker image (based on the code on a given branch) run:
```
docker build -t opencanary -f Dockerfile.latest .
```
To build a Docker image based on what has been released in Pypi, run:
```
docker build -t opencanary -f Dockerfile.stable .
```
Run the docker image with the following command:

# You will need to add/remove the ports you are using by listing them with `-p ##:##`
docker run --rm --detach -p 21:21 -p 80:80 -v "${PWD}/data/.opencanary.conf":"/root/.opencanary.conf" --name opencanary opencanary

To view the logs run docker logs opencanary

To stop the container run docker stop opencanary

brunohenriquy/opencanary