NemosMiner Monitors mining pools in real-time in order to find the most profitable Algo
Updated 01 November 2019
Copyright (c) 2018-2019 Nemo and MrPlus
This is free software, and you are welcome to redistribute it under certain conditions. https://github.com/Minerx117/NemosMiner/blob/master/LICENSE
Updated/Maintained by Nemo/Minerx117
with alot of Help From MrPlusGH and grantemsley without them NemosMiner would not be possible
NemosMiner was based on MultiPoolMiner which can be found here: https://github.com/MultiPoolMiner/MultiPoolMiner NemosMiner is currently based on NPlusMiner which can be found here: https://github.com/MrPlusGH/NPlusMiner
GUI and easy configuration
Auto Benchmarks Each algo to get optimal speeds
Fully automated
Auto Downloads Miners
Auto Updates
Monitoring
Easy configuration, easy start:
Run NemosMiner.bat
1. Config tab
2. Set your Wallet address and Username
3. Select your pool
4. Save Config
5. Start
note: 2. you only need to change Username if you are using Miningpoolhub
Algo selection / removal
+algo for algo selection
-algo for algo removal
If "+" Used, all selected algo have to be listed
If "Minus" Used, all algo selected but exluded ones.
Do not combine + and - for the same algo
Examples:
Algo list = -x16r
Will mine anything but x16r
Algo list = -x16r,-bcd
Will mine anything but x16r and bcd
Algo list = +x16r
Will mine only x16r
Algo list = +x16r,+bcd
Will mine only x16r and BCD
Algo list blank
Will mine anything
Pools variants
24hr - uses last 24hour Actual API too request profit
-Low switching rate
plus - uses advanced calculations to reduce switching
-Medium switching rate
normal - uses current estimate API too request profit
-High switching rate
Developer/Contributors Donation: list and wallets is publicly available at: https://nemosminer.com/data/devlist.json
There is a 14 minute per day default donation (0.9%),
which can be increased or decreased in the config tab,
please help support the great team behind NemosMiner by leaving mining donations turned on
NemosMiner Monitoring Server : https://nemosminer.com
Keep tabs on all your mining rigs from one place
You can now optionally monitor all your workers remotely, both in the GUI and via https://nemosminer.com
Monitoring setup instructions https://nemosminer.com/setup.php
GUI
Since version 3.0 NemosMiner has a GUI making it easy to configure and run.
Relies on config files. No need to edit bat files. Simply run NemosMiner.bat
Set the config on the config tab, save, close, run NemosMiner.bat
Pause mining
Ability to pause miners while keeping other jobs running (pause button)
This will stop mining activity
BrainPlus will still run in the background avoiding the learning phase on resume
EarningTracker will still run in the background avoiding the learning phase on resume
prerun
Ability to run a batch prior switching to a specific algo.
For example, can be used to set per algo OC via nvidiaInspector
Simply create a file named <AlgoName>.bat in prerun folder
If <AlgoName>.bat does not exist, will try to launch prerun/default.bat
Use overclock with caution
Per pools config (Advanced)
- **This is for advanced users. Do not use if you do not know what you are doing.**
- You can now set specific options per pool. For example, you can mine NiceHash on the internal wallet and other pools on a valid wallet. This configuration is provided as an example in Config\PoolsConfig-NHInternal.json
- Available options
- Wallet = your wallet address
- UserName = your MPH user name
- WorkerName = your worker name
- PricePenaltyFactor = See explanation below
- Algorithm = List of included or excluded Aglo on pool (see example files)
- Usage
- The file Config\PoolsConfig.json contains per pool configuration details. If a pool is listed in this file,
the specific settings will be taken into account. If not, the setting for the entry name default will be used.
**Do not delete the default entry.**
- Edit Config\PoolsConfig.json
- Add an entry for the pool you want to customize
- The name must be the NemosMiner name for the pool. ie. for ahashpool, if you use Plus. The name is ahashpoolplus.
- (**careful with json formating ;)**)
- Best way is to duplicate the default entry
- Note that the GUI only updates the default entry. Any other changes need to be done manualy
PricePenaltyFactor
- When using advanced per pool configuration, it is possible to add a penalty factor for a specific pool. This simply adds as a multiplicator on estimations presented by the pool.
- Example scenario
- NiceHash has a 4% fee - Set PricePenaltyFactor to 0.96 (1-0.04)
- You feel like a pool is exaggerating his estimations by 10% - Set PricePenaltyFactor to 0.9
zergpoolplus/nlpoolplus/ahashpoolplus/zpoolplus/blazepoolplus/phiphipoolplus/blockmastersplus/hashrefineryplus
Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate.
Includes some trust index based on past 1hr currentestimate variation from 24hr.
AND is NOT sensible to spikes.
This shows less switching than following Current Estimate and more switching that following the 24hr Actual.
Better profitability.
Earnings Tracking
Displays BTC/H and BTC/D as well a estimation of when the pool payment threshold will be reached.
Supported pools:
ahashpool
zpool
nicehash
miningpoolhub (partial)
If mining more that one pools, shows stats for any supported pool
Press key e in the console window to show/hide earnings
Support running multiple instances
**Experimental**
More than one instance of NemosMiner can run on the same rig
Each instance must be placed in it's own directory
Miner has to be started prior the launch of the next instance
Optional miners (Advanced)
Some miners are not enabled by default in NemosMiner for a variety of reasons:
These are closed source and therefore not enabled in NemosMiner by default.
Use at your own risk.
For advanced users, check the Optional Miners checkbox on the Config tab to enable these miners.
CustomMiners (Advanced)
Users can place any miner.ps1 from miners/optionalminers or custom user created miner.ps1 files, in CustomMiners folder
leaving miners and optionalminers disabled in config will enable CustomMiners folder
Algo switching log
Simple algo switching log in csv switching.log file found in Logs folder.
You can easily track switching rate.
Console Display Options
Use -UIStyle Light or -UIStyle Full in config.json
Full = Usual display (Default)
Light = Show only currently mining info
UIStyle automaticaly swtiches to Full during benchmarking.
In session console display toggle
Press key s in the window to switch between light and full display
Press key e in the window to show/hide earnings
Will toggle display at next refresh
New version notification
NemosMiner will notify new version availability
If you have Windows 7, 8, or 8.1, please update PowerShell: update PowerShell
some miners may need 'Visual C++ 2013' if you don't already have it: (install both x86 & x64) Visual C++ Redistributable for Visual Studio 2012/2013
some miners may need 'Visual C++ 2015' if you don't already have it: (install both x86 & x64) Visual C++ Redistributable for Visual Studio 2014/2015
some miners may need 'Visual C++ 2015 update 3' if you don't already have it: (install both x86 & x64) Visual C++ Redistributable for Visual Studio 2015 update 3
running multiple cards its recommended to increase Virtual Memory 64gb is optimal
recommended/optimal Windows Nvidia driver Windows 10 = 431.86
recommended/optimal Windows Nvidia driver Windows 7,8,8.1 = 431.60
recommended/optimal Linux Nvidia driver = 430.34
Tested with 6x1070 6x1070ti 6x1080 6x1080ti 9x1660ti 6x2060 6x2070 6x2080 6x2080ti(users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards
CPU miners are tested with AMD Ryzen 3700x CPU's
Licensed under the GNU General Public License v3.0 Permissions of this strong copyleft license are conditioned on making available complete source code of licensed works and modifications, which include larger works using a licensed work, under the same license. Copyright and license notices must be preserved. Contributors provide an express grant of patent rights. https://github.com/Minerx117/NemosMiner/blob/master/LICENSE