Introduction

democratic-csi implements the csi (container storage interface) spec providing storage for various container orchestration systems (ie: Kubernetes).

The current focus is providing storage via iscsi/nfs from zfs-based storage systems, predominantly FreeNAS / TrueNAS and ZoL on Ubuntu.

The current drivers implement the depth and breadth of the csi spec, so you have access to resizing, snapshots, clones, etc functionality.

democratic-csi is 2 things:

several implementations of csi drivers
- freenas-nfs (manages zfs datasets to share over nfs)
- freenas-iscsi (manages zfs zvols to share over iscsi)
- freenas-smb (manages zfs datasets to share over smb)
- zfs-generic-nfs (works with any ZoL installation...ie: Ubuntu)
- zfs-generic-iscsi (works with any ZoL installation...ie: Ubuntu)
- zfs-local-ephemeral-inline (provisions node-local zfs datasets)
- nfs-client (crudely provisions storage using a shared nfs share/directory for all volumes)
- node-manual (allows connecting to manually created smb, nfs, and iscsi volumes, see sample PVs in the examples directory)
framework for developing csi drivers

If you have any interest in providing a csi driver, simply open an issue to discuss. The project provides an extensive framework to build from making it relatively easy to implement new drivers.

Installation

Predominantly 3 things are needed:

node prep (ie: your kubernetes cluster nodes)
server prep (ie: your storage server)
deploy the driver into the cluster (helm chart provided with sample values.yaml)

Guides

https://jonathangazeley.com/2021/01/05/using-truenas-to-provide-persistent-storage-for-kubernetes/
https://gist.github.com/admun/4372899f20421a947b7544e5fc9f9117 (migrating from nfs-client-provisioner to democratic-csi)

Node Prep

You should install/configure the requirements for both nfs and iscsi.

nfs

RHEL / CentOS
sudo yum install -y nfs-utils

Ubuntu / Debian
sudo apt-get install -y nfs-common

iscsi

Note that multipath is supported for the iscsi-based drivers. Simply setup multipath to your liking and set multiple portals in the config as appropriate.

If you are running Kubernetes with rancher/rke please see the following:

rancher/rke#1846

RHEL / CentOS

# Install the following system packages
sudo yum install -y lsscsi iscsi-initiator-utils sg3_utils device-mapper-multipath

# Enable multipathing
sudo mpathconf --enable --with_multipathd y

# Ensure that iscsid and multipathd are running
sudo systemctl enable iscsid multipathd
sudo systemctl start iscsid multipathd

# Start and enable iscsi
sudo systemctl enable iscsi
sudo systemctl start iscsi


Ubuntu / Debian

# Install the following system packages
sudo apt-get install -y open-iscsi lsscsi sg3-utils multipath-tools scsitools

# Enable multipathing
sudo tee /etc/multipath.conf <<-'EOF'
defaults {
    user_friendly_names yes
    find_multipaths yes
}
EOF

sudo systemctl enable multipath-tools.service
sudo service multipath-tools restart

# Ensure that open-iscsi and multipath-tools are enabled and running
sudo systemctl status multipath-tools
sudo systemctl enable open-iscsi.service
sudo service open-iscsi start
sudo systemctl status open-iscsi

freenas-smb

If using with Windows based machines you may need to enable guest access (even if you are connecting with credentials)

Set-ItemProperty HKLM:\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters AllowInsecureGuestAuth -Value 1
Restart-Service LanmanWorkstation -Force

zfs-local-ephemeral-inline

This driver provisions node-local ephemeral storage on a per-pod basis. Each node should have an identically named zfs pool created and avaialble to the driver. Note, this is NOT the same thing as using the docker zfs storage driver (although the same pool could be used). No other requirements are necessary.

Server Prep

Server preparation depends slightly on which driver you are using.

FreeNAS (freenas-nfs, freenas-iscsi, freenas-smb)

The recommended version of FreeNAS is 12.0-U2+, however the driver should work with much older versions as well.

Ensure the following services are configurged and running:

ssh (if you use a password for authentication make sure it is allowed)
ensure zsh, bash, or sh is set as the root shell, csh gives false errors due to quoting
nfs
iscsi
- (fixed in 12.0-U2+) when using the FreeNAS API concurrently the /etc/ctl.conf file on the server can become invalid, some sample scripts are provided in the contrib directory to clean things up ie: copy the script to the server and directly and run - ./ctld-config-watchdog-db.sh | logger -t ctld-config-watchdog-db.sh & please read the scripts and set the variables as appropriate for your server.
- ensure you have pre-emptively created portals, initatior groups, auths
  - make note of the respective IDs (the true ID may not reflect what is visible in the UI)
  - IDs can be visible by clicking the the Edit link and finding the ID in the browser address bar
  - Optionally you may use the following to retrieve appropiate IDs:
    - curl --header "Accept: application/json" --user root:<password> 'http(s)://<ip>/api/v2.0/iscsi/portal'
    - curl --header "Accept: application/json" --user root:<password> 'http(s)://<ip>/api/v2.0/iscsi/initiator'
    - curl --header "Accept: application/json" --user root:<password> 'http(s)://<ip>/api/v2.0/iscsi/auth'
smb

If you would prefer you can configure democratic-csi to use a non-root user when connecting to the FreeNAS server:

Create a non-root user (e.g., csi)
Ensure that user has passwordless sudo privileges:
```
csi ALL=(ALL) NOPASSWD:ALL
```
(note this can get reset by FreeNAS if you alter the user via the GUI later)
Instruct democratic-csi to use sudo by adding the following to your driver configuration:
```
zfs:
  cli:
    sudoEnabled: true
```

Starting with TrueNAS CORE 12 it is also possible to use an apiKey instead of the root password for the http connection.

Issues to review:

ZoL (zfs-generic-nfs, zfs-generic-iscsi)

Ensure ssh and zfs is installed on the nfs/iscsi server and that you have installed targetcli.

sudo yum install targetcli -y
sudo apt-get -y install targetcli-fb

Helm Installation

helm repo add democratic-csi https://democratic-csi.github.io/charts/
helm repo update
# helm v2
helm search democratic-csi/

# helm v3
helm search repo democratic-csi/

# copy proper values file from https://github.com/democratic-csi/charts/tree/master/stable/democratic-csi/examples
# edit as appropriate
# examples are from helm v2, alter as appropriate for v3

# add --create-namespace for helm v3
helm upgrade \
--install \
--values freenas-iscsi.yaml \
--namespace democratic-csi \
zfs-iscsi democratic-csi/democratic-csi

helm upgrade \
--install \
--values freenas-nfs.yaml \
--namespace democratic-csi \
zfs-nfs democratic-csi/democratic-csi

A note on non standard kubelet paths

Some distrobutions, such as minikube and microk8s use a non-standard kubelet path. In such cases it is necessary to provide a new kubelet host path, microk8s example below:

microk8s helm upgrade \
  --install \
  --values freenas-nfs.yaml \
  --set node.kubeletHostPath="/var/snap/microk8s/common/var/lib/kubelet"  \
  --namespace democratic-csi \
  zfs-nfs democratic-csi/democratic-csi

openshift

democratic-csi generally works fine with openshift. Some special parameters need to be set with helm (support added in chart version 0.6.1):

# for sure required
--set node.rbac.openshift.privileged=true
--set node.driver.localtimeHostPath=false

# unlikely, but in special circumstances may be required
--set controller.rbac.openshift.privileged=true

Nomad

democratic-csi works with Nomad in a functioning but limted capacity. See the Nomad docs for details.

Multiple Deployments

You may install multiple deployments of each/any driver. It requires the following:

Use a new helm release name for each deployment
Make sure you have a unique csiDriver.name in the values file
Use unqiue names for your storage classes (per cluster)
Use a unique parent dataset (ie: don't try to use the same parent across deployments or clusters)

Snapshot Support

Install beta (v1.17+) CRDs (once per cluster):

https://github.com/kubernetes-csi/external-snapshotter/tree/master/client/config/crd

kubectl apply -f snapshot.storage.k8s.io_volumesnapshotclasses.yaml
kubectl apply -f snapshot.storage.k8s.io_volumesnapshotcontents.yaml
kubectl apply -f snapshot.storage.k8s.io_volumesnapshots.yaml

Install snapshot controller (once per cluster):

https://github.com/kubernetes-csi/external-snapshotter/tree/master/deploy/kubernetes/snapshot-controller

# replace namespace references to your liking
kubectl apply -f rbac-snapshot-controller.yaml
kubectl apply -f setup-snapshot-controller.yaml

Install democratic-csi as usual with volumeSnapshotClasses defined as appropriate.

Migrating from freenas-provisioner and freenas-iscsi-provisioner

It is possible to migrate all volumes from the non-csi freenas provisioners to democratic-csi.

Copy the contrib/freenas-provisioner-to-democratic-csi.sh script from the project to your workstation, read the script in detail, and edit the variables to your needs to start migrating!

c0va23/democratic-csi