CasparCG Server 2.0.4 Beta 1 ============================ Thank you for your interest in CasparCG Server, a professional software used to play out and record professional graphics, audio and video to multiple outputs. It has been in 24/7 broadcast production since 2006. This release is NOT considered tested and stable, and it is NOT intended for use in professional production. Please use CasparCG Server 2.0.3 if you need proven stability! More information is available at http://casparcg.com/ SYSTEM REQUIREMENTS ------------------- 1. Intel processor capable of using SSSE3 instructions. Please refer to http://en.wikipedia.org/wiki/SSSE3 for a complete list. While AMD processors should work, CasparCG Server has only been tested on Intel processors. 2. We recommend Windows 7 (64-bit,) but this software has also been used successfully on Windows 7 (32-bit) and Windows XP SP2 (32-bit only.) Using CasparCG Server on Windows 8 and Windows Vista is untested and is not recommended! 3. An NVIDIA graphics card (GPU) capable of OpenGL 3.0 or higher is strongly recommended! Please check your card's capabilities at: http://en.wikipedia.org/wiki/Comparison_of_Nvidia_graphics_processing_units Make sure that you have the latest drivers installed: http://www.nvidia.com/Download/index.aspx?lang=en-us%20nVidia%20drivers Experimental support for AMD/ATI cards has been added, but it has not been fully tested. Graphics cards from other manufacturers _may_ work but have not been tested! 4. Microsoft Visual C++ 2010 Redistributable Package must be installed. Free download at: http://www.microsoft.com/download/en/details.aspx?id=5555 5. You must have Flash Player 10.3 or later installed (an installer can be found in the "Flash Player Installation" folder.) 6. Make sure you turn off Windows' "Aero" theme and "ClearType" font smoothing as they have been known to interfere with transparency in Flash templates, and can also cause problems with Vsync when outputting to computer screens. The latest system recommendations are available at: http://casparcg.com/wiki/CasparCG_Server#System_Requirements INSTALLATION ------------ 1. Check that your system meets the requirements above. 2. Unzip and place the "CasparCG Server 2.0.4 Beta 1" folder anywhere you like. 3. Install "Microsoft Visual C++ 2010 Redistributable Package" from http://www.microsoft.com/download/en/details.aspx?id=5555 4. Install "Flash Player 10.3.183.14" from the "Flash Player Installation" folder. 5. Make sure you turn off Windows' "Aero Theme" and "ClearType" font smoothing as they can interfere with CasparCG Server's OpenGL features! 6. Start the "casparcg_server.exe" program and configure the settings. 7. Connect to the Server from a client, such as the CasparCG Client 2.0.4 (available as a separate download.) DOCUMENTATION ------------- The most up-to-date documentation is always available at http://casparcg.com/wiki/ Ask questions in the forum: http://casparcg.com/forum/ LICENSING --------- CasparCG Client is distributed under the GNU General Public License GPLv3 or higher, see LICENSE.TXT for details. The included software is provided as-is by Sveriges Televison AB. More information is available at http://casparcg.com/
cambell-prince/Server
CasparCG Server is a Windows software used to play out professional graphics, audio and video to multiple outputs. It has been in 24/7 production since 2006.
C++GPL-3.0