/periphery

A tool to identify unused code in Swift projects.

Primary LanguageSwiftMIT LicenseMIT

Periphery
Periphery

A tool to identify unused code in Swift projects.

Now I am become Delete, the destroyer of codes.



Contents

Installation

Homebrew (macOS only)

Install Homebrew:

You can skip this step if you already have Homebrew installed.

/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"

Now install Periphery itself:

brew install peripheryapp/periphery/periphery

Add Periphery to your Package.swift dependencies:

.package(url: "https://github.com/peripheryapp/periphery", from: "2.0.0")

Now run periphery via Swift:

swift run periphery scan ...

SwiftPM does not yet support prebuilt binaries, therefore be aware that Periphery will be built from source. This also means that Periphery will be built using the same build configuration you specify to build your entire project (the default is 'debug'). Debug builds of Periphery are significantly slower than release builds.

CocoaPods (macOS only)

Add the following to your Podfile:

pod 'Periphery'

Now run pod install, the Periphery executable will be downloaded and placed at Pods/Periphery/periphery.

How To Use

The scan Command

The scan command is Periphery's primary function. To begin a guided setup, simply change to your project directory and run:

periphery scan --setup

Guided setup only works for Xcode and SwiftPM projects, to use Periphery with non-Apple build systems such as Bazel, see Build Systems.

After answering a few questions, Periphery will print out the full scan command and execute it.

The guided setup is only intended for introductory purposes, once you are familiar with Periphery you can try some more advanced options, all of which can be seen with periphery help scan.

To get coherent results from Periphery, it's crucial to understand the implications of the build targets you choose to analyze. For example, imagine a project consisting of three targets: App, Lib and Tests. The App target imports Lib, and the Tests targets imports both App and Lib. If you were to provide all three to the --targets option then Periphery will be able to analyze your project as a whole. However, if you only choose to analyze App and Lib, but not Tests, Periphery may report some instances of unused code that are only referenced by Tests. Therefore when you suspect Periphery has provided an incorrect result, it's important to consider the targets that you have chosen to analyze.

If your project consists of one or more standalone frameworks that do not also contain some kind of application that consume their interfaces, then you'll need to tell Periphery to assume that all public declarations are in fact used by including the --retain-public option.

For projects that are mixed Objective-C & Swift, it's highly recommend you read about the implications this can have on your results.

Configuration

Once you've settled upon the appropriate options for your project, you may wish to persist them in a YAML configuration file. The simplest way to achieve this is to run Periphery with the --verbose option. Near the beginning of the output you will see the [configuration:begin] section with your configuration formatted as YAML below. Copy & paste the configuration into .periphery.yml in the root of your project folder. You can now simply run periphery scan and the YAML configuration will be used.

How It Works

Periphery first builds your project. For Xcode projects the schemes provided via the --schemes option are built using xcodebuild. For Swift Package Manager projects, the individual targets provided via the --targets option are built using swift build. The Swift compiler employs a technique called index-while-building to populate an index store that contains information about the structure of your project's source code.

After your project is built, Periphery performs an indexing phase. For every source file that is a member of the targets provided via the --targets option, Periphery obtains its structural information from the index store and builds its own internal graph representation of your project. Periphery also analyzes each file's abstract syntax tree (AST) to fill in some details not provided by the index store.

Once indexing is complete, Periphery analyzes the graph to identify unused code. This phase consists of a number of steps that mutate the graph to make it easier to identify specific scenarios of unused code. The final step walks the graph from its roots to identify declarations that are no longer referenced.

Analysis

The goal of Periphery is to report instances of unused declarations. A declaration is a class, struct, protocol, function, property, constructor, enum, typealias, associatedtype, etc. As you'd expect, Periphery is able to identify simple unreferenced declarations, e.g a class that is no longer used anywhere in your codebase.

Periphery can also identify more advanced instances of unused code. The following section explains these in detail.

Function Parameters

Periphery can identify unused function parameters. Instances of unused parameters can also be identified in protocols and their conforming declarations, as well as parameters in overridden methods. Both of these scenarios are explained further below.

Protocols

An unused parameter of a protocol function will only be reported as unused if the parameter is also unused in all implementations.

protocol Greeter {
    func greet(name: String)
    func farewell(name: String) // 'name' is unused
}

class InformalGreeter: Greeter {
    func greet(name: String) {
        print("Sup " + name + ".")
    }

    func farewell(name: String) { // 'name' is unused
      print("Cya.")
    }
}

Tip

You can ignore all unused parameters from protocols and conforming functions with the --retain-unused-protocol-func-params option.

Overrides

Similar to protocols, parameters of overridden functions are only reported as unused if they're also unused in the base function and all overriding functions.

class BaseGreeter {
    func greet(name: String) {
        print("Hello.")
    }

    func farewell(name: String) { // 'name' is unused
        print("Goodbye.")
    }
}

class InformalGreeter: BaseGreeter {
    override func greet(name: String) {
        print("Sup " + name + ".")
    }

    override func farewell(name: String) { // 'name' is unused
        print("Cya.")
    }
}

Foreign Protocols & Classes

Unused parameters of protocols or classes defined in foreign modules (e.g Foundation) are always ignored, since you do not have access to modify the base function declaration.

fatalError Functions

Unused parameters of functions that simply call fatalError are also ignored. Such functions are often unimplemented required initializers in subclasses.

class Base {
    let param: String

    required init(param: String) {
        self.param = param
    }
}

class Subclass: Base {
    init(custom: String) {
        super.init(param: custom)
    }

    required init(param: String) {
        fatalError("init(param:) has not been implemented")
    }
}

Protocols

A protocol which is conformed to by an object is not truly used unless it's also used as an existential type, or to specialize a generic method/class. Periphery is able to identify such redundant protocols whether they are conformed to by one, or even multiple objects.

protocol MyProtocol { // 'MyProtocol' is redundant
    func someMethod()
}

class MyClass1: MyProtocol { // 'MyProtocol' conformance is redundant
    func someMethod() {
        print("Hello from MyClass1!")
    }
}

class MyClass2: MyProtocol { // 'MyProtocol' conformance is redundant
    func someMethod() {
        print("Hello from MyClass2!")
    }
}

let myClass1 = MyClass1()
myClass1.someMethod()

let myClass2 = MyClass2()
myClass2.someMethod()

Here we can see that despite both implementations of someMethod are called, at no point does an object take on the type of MyProtocol. Therefore the protocol itself is redundant, and there's no benefit from MyClass1 or MyClass2 conforming to it. We can remove MyProtocol along with each redundant conformance, and just keep someMethod in each class.

Just like a normal method or property of a object, individual properties and methods declared by your protocol can also be identified as unused.

protocol MyProtocol {
    var usedProperty: String { get }
    var unusedProperty: String { get } // 'unusedProperty' is unused
}

class MyConformingClass: MyProtocol {
    var usedProperty: String = "used"
    var unusedProperty: String = "unused" // 'unusedProperty' is unused
}

class MyClass {
    let conformingClass: MyProtocol

    init() {
        conformingClass = MyConformingClass()
    }

    func perform() {
        print(conformingClass.usedProperty)
    }
}

let myClass = MyClass()
myClass.perform()

Here we can see that MyProtocol is itself used, and cannot be removed. However, since unusedProperty is never called on MyConformingClass, Periphery is able to identify that the declaration of unusedProperty in MyProtocol is also unused and can be removed along with the unused implementation of unusedProperty.

Enumerations

Along with being able to identify unused enumerations, Periphery can also identify individual unused enum cases. Plain enums that are not raw representable, i.e that don't have a String, Character, Int or floating-point value type can be reliably identified. However, enumerations that do have a raw value type can be dynamic in nature, and therefore must be assumed to be used.

Let's clear this up with a quick example:

enum MyEnum: String {
    case myCase
}

func someFunction(value: String) {
    if let myEnum = MyEnum(rawValue: value) {
        somethingImportant(myEnum)
    }
}

There's no direct reference to the myCase case, so it's reasonable to expect it might no longer be needed, however if it were removed we can see that somethingImportant would never be called if someFunction were passed the value of "myCase".

Assign-only Properties

Properties that are assigned but never used are identified as such, e.g:

class MyClass {
    var assignOnlyProperty: String // 'assignOnlyProperty' is assigned, but never used

    init(value: String) {
        self.assignOnlyProperty = value
    }
}

In some cases this may be the intended behavior, therefore you have a few options available to silence such results:

  • Retain individual properties using Comment Commands.
  • Retain all assign-only properties by their type with --retain-assign-only-property-types. Given types must match their exact usage in the property declaration (sans optional question mark), e.g String, [String], Set<String>. Periphery is unable to resolve inferred property types, therefore in some instances you may need to add explicit type annotations to your properties.
  • Disable assign-only property analysis entirely with --retain-assign-only-properties.

Redundant Public Accessibility

Declarations that are marked public yet are not referenced from outside their home module, are identified as having redundant public accessibility. In this scenario, the public annotation can be removed from the declaration. Removing redundant public accessibility has a couple of benefits:

This analysis can be disabled with --disable-redundant-public-analysis.

Objective-C

Periphery cannot analyze Objective-C code since types may be dynamically typed.

By default Periphery does not assume that declarations accessible by the Objective-C runtime are in use. If your project is a mix of Swift & Objective-C, you can enable this behavior with the --retain-objc-accessible option. Swift declarations that are accessible by the Objective-C runtime are those that are explicitly attributed with @objc or @objcMembers, and classes that inherit NSObject either directly or indirectly via another class.

Encodable

Conformance to Encodable (inc. implicitly via Codable) causes synthesis of additional code not visible to Periphery, and thus Periphery is unable to determine if the properties of conforming types are referenced from synthesized code. Therefore, all such properties must be retained in order to avoid false-positive results in the situation where the properties are only referenced via the initializer. For example:

struct SomeStruct: Encodable {
    let someProperty: String // Not unused, automatically retained.
}
let data = try JSONEncoder().encode(SomeStruct(someProperty: "value"))

This property retention behavior is automatic, even when Encodable conformance is inherited via another protocol. However, if a protocol that inherits Encodable is declared in an external module that Periphery has not analyzed, it cannot detect the inheritance of Encodable. In this situation you can use the --external-encodable-protocols option enable this behavior for the given protocols.

Comment Commands

For whatever reason, you may want to keep some unused code. Source code comment commands can be used to ignore specific declarations, and exclude them from the results.

An ignore comment command can be placed directly on the line above any declaration to ignore it, and all descendent declarations:

// periphery:ignore
class MyClass {}

You can also ignore specific unused function parameters:

// periphery:ignore:parameters unusedOne,unusedTwo
func someFunc(used: String, unusedOne: String, unusedTwo: String) {
    print(used)
}

The // periphery:ignore:all command can be placed at the top of the source file to ignore the entire contents of the file. Note that the comment must be placed above any code, including import statements.

Xcode Integration

Before setting up Xcode integration, we highly recommend you first get Periphery working in a terminal, as you will be using the exact same command via Xcode.

Step 1: Create an Aggregate Target

Select your project in the Project Navigator and click the + button at the bottom left of the Targets section. Select Cross-platform and choose Aggregate. Hit Next.

Step 1

Choose a name for the new target, e.g "Periphery" or "Unused Code".

Step 2

Step 2: Add a Run Script Build Phase

In the Build Phases section click the + button to add a new Run Script phase.

Step 3

In the shell script window enter the Periphery command. Be sure to include the --format xcode option.

Step 4

Step 3: Select & Run

You're ready to roll. You should now see the new scheme in the dropdown. Select it and hit run.

Tip

If you'd like others on your team to be able to use the scheme, you'll need to mark it as Shared. This can be done by selecting Manage Schemes... and selecting the Shared checkbox next to the new scheme. The scheme definition can now be checked into source control.

Step 5

Excluding Files

Both exclusion options described below accept a Bash v4 style path glob, either absolute or relative to your project directory. You may specify multiple globs by separating them with a pipe character, e.g "Sources/Single.swift|**/Generated/*.swift|**/*.{xib,storyboard}".

Excluding Results

To exclude the results from certain files, pass the --report-exclude <globs> option to the scan command.

Excluding Indexed Files

To exclude files from being indexed, pass the --index-exclude <globs> option to the scan command. Excluding files from the index phase means that any declarations and references contained within the files will not be seen by Periphery. Periphery will be behave as if the files do not exist. For example, this option can be used to exclude generated code that holds references to non-generated code, or exclude all .xib and .storyboard files that hold references to code.

Continuous Integration

When integrating Periphery into a CI pipeline, you can potentially skip the build phase if your pipeline has already done so, e.g to run tests. This can be achieved using the --skip-build option. However, you also need to tell Periphery the location of the index store using --index-store-path. This location is dependent on your project type.

Note that when using --skip-build and --index-store-path it's vital that the index store contains data for all of the targets you specify via --targets. For example, if your pipeline previously built the targets 'App' and 'Lib', the index store will only contain data for the files in those targets. You cannot then instruct Periphery to scan additional targets, e.g 'Extension', or 'UnitTests'.

Xcode

The index store generated by xcodebuild exists in DerivedData at a location dependent on your project, e.g ~/Library/Developer/Xcode/DerivedData/YourProject-abc123/Index/DataStore. For Xcode 14 and later, the Index directory can be found as Index.noindex, which suppresses Spotlight indexing.

SwiftPM

By default Periphery, looks for the index store at .build/debug/index/store. Therefore, if you intend to run Periphery directly after calling swift test, you can omit the --index-store-path option, and Periphery will use the index store created when the project was built for testing. However if this isn't the case, then you must provide Periphery the location of the index store with --index-store-path.

Build Systems

Periphery can analyze projects using third-party build systems such as Bazel, though it cannot drive them automatically like SwiftPM and xcodebuild. Instead, you need to specify the index store location and provide a file-target mapping file.

A file-target mapping file contains a simple mapping of source files to build targets. You will need to generate this file yourself using the appropriate tooling for your build system. The format is as follows:

{
  "file_targets": {
    "path/to/file_a.swift": ["TargetA"],
    "path/to/file_b.swift": ["TargetB", "TargetC"]
  }
}

Tip

Relative paths are assumed to be relative to the current directory.

You can then invoke periphery as follows:

periphery scan --file-targets-path map.json --index-store-path index/store

Tip

Both options support multiple paths.

Platforms

Periphery supports both macOS and Linux. macOS supports both Xcode and Swift Package Manager (SPM) projects, whereas only SPM projects are supported on Linux.

Troubleshooting

Erroneous results in one or more files, such as false-positives and incorrect source file locations

It's possible for the index store to become corrupt, or out of sync with the source file. This can happen, for example, if you forcefully terminate (^C) a scan. To rectify this, you can pass the --clean-build flag to the scan command to force removal of existing build artifacts.

Code referenced within preprocessor macro conditional branch is unused

When Periphery builds your project it uses the default build configuration, which is typically 'debug'. If you use preprocessor macros to conditionally compile code, Periphery will only have visibility into the branches that are compiled. In the example below, releaseName will be reported as unused as it is only referenced within the non-debug branch of the macro.

struct BuildInfo {
    let debugName = "debug"
    let releaseName = "release" // 'releaseName' is unused

    var name: String {
        #if DEBUG
        debugName
        #else
        releaseName
        #endif
    }
}

You've a few options to workaround this:

  • Use Comment Commands to explicitly ignore releaseName.
  • Filter the results to remove known instances.
  • Run Periphery once for each build configuration and merge the results. You can pass arguments to the underlying build by specifying them after --, e.g periphery scan ... -- -configuration release.

Swift package is platform-specific

Periphery uses swift build to compile a Swift package which will fail if the Swift package is platform-specific (e.g. to iOS).

As a workaround, you can manually build the Swift package with xcodebuild and then use the --skip-build and --index-store-path options to target the index store previously produced by xcodebuild.

Example:

# 1. use xcodebuild
xcodebuild -scheme MyScheme -destination 'platform=iOS Simulator,OS=15.5,name=iPhone 13' -derivedDataPath '../dd' clean build

# 2. use produced index store for scanning
periphery scan --skip-build --index-store-path '../dd/Index/DataStore/'

Known Bugs

Due to some underlying bugs in Swift, Periphery may in some instances report incorrect results.

ID Title
61509 Shorthand optional binding has no reference to original variable
56559 Index store does not relate constructor referenced via Self
56541 Index store does not relate static property getter used as subscript key
56327 Index store does not relate objc optional protocol method implemented in subclass
56189 Index store should relate appendInterpolation from string literals
56165 Index store does not relate constructor via literal notation
49641 Index does not include reference to constructor of class/struct with generic types