Welcome to the WPILib project. This repository contains the HAL, WPILibJ, and WPILibC projects. These are the core libraries for creating robot programs for the roboRIO.
The WPILib Mission is to enable FIRST Robotics teams to focus on writing game-specific software rather than focusing on hardware details - "raise the floor, don't lower the ceiling". We work to enable teams with limited programming knowledge and/or mentor experience to be as successful as possible, while not hampering the abilities of teams with more advanced programming capabilities. We support Kit of Parts control system components directly in the library. We also strive to keep parity between major features of each language (Java, C++, and NI's LabVIEW), so that teams aren't at a disadvantage for choosing a specific programming language. WPILib is an open source project, licensed under the BSD 3-clause license. You can find a copy of the license here.
Using Gradle makes building WPILib very straightforward. It only has a few dependencies on outside tools, such as the ARM cross compiler for creating roboRIO binaries.
- A C++ compiler
- On Linux, GCC works fine
- On Windows, you need Visual Studio 2019 (the free community edition works fine). Make sure to select the C++ Programming Language for installation
- ARM Compiler Toolchain
- Note that for 2020 and beyond, you should use version 7 or greater of GCC
- Doxygen (Only required if you want to build the C++ documentation)
Clone the WPILib repository. If the toolchains are not installed, install them, and make sure they are available on the system PATH.
See the styleguide README for wpiformat setup instructions.
All build steps are executed using the Gradle wrapper, gradlew. Each target that Gradle can build is referred to as a task. The most common Gradle task to use is build. This will build all the outputs created by WPILib. To run, open a console and cd into the cloned WPILib directory. Then:
./gradlew buildTo build a specific subproject, such as WPILibC, you must access the subproject and run the build task only on that project. Accessing a subproject in Gradle is quite easy. Simply use :subproject_name:task_name with the Gradle wrapper. For example, building just WPILibC:
./gradlew :wpilibc:buildIf you have installed the FRC Toolchain to a directory other than the default, or if the Toolchain location is not on your System PATH, you can pass the toolChainPath property to specify where it is located. Example:
./gradlew build -PtoolChainPath=some/path/to/frc/toolchain/binIf you also want simulation to be built, add -PmakeSim. This requires gazebo_transport. We have tested on 14.04 and 15.05, but any correct install of Gazebo should work, even on Windows if you build Gazebo from source. Correct means CMake needs to be able to find gazebo-config.cmake. See The Gazebo website for installation instructions.
./gradlew build -PmakeSimIf you prefer to use CMake directly, the you can still do so. The common CMake tasks are wpilibcSim, frc_gazebo_plugins, and gz_msgs
mkdir build #run this in the root of allwpilib
cd build
cmake ..
makeThe gradlew wrapper only exists in the root of the main project, so be sure to run all commands from there. All of the subprojects have build tasks that can be run. Gradle automatically determines and rebuilds dependencies, so if you make a change in the HAL and then run ./gradlew :wpilibc:build, the HAL will be rebuilt, then WPILibC.
There are a few tasks other than build available. To see them, run the meta-task tasks. This will print a list of all available tasks, with a description of each task.
wpiformat can be executed anywhere in the repository via py -3 -m wpiformat on Windows or python3 -m wpiformat on other platforms.
CMake is also supported for building. See README-CMAKE.md.
If you are building to test with other dependencies or just want to export the build as a Maven-style dependency, simply run the publish task. This task will publish all available packages to ~/releases/maven/development. If you need to publish the project to a different repo, you can specify it with -Prepo=repo_name. Valid options are:
- development - The default repo.
- beta - Publishes to ~/releases/maven/beta.
- stable - Publishes to ~/releases/maven/stable.
- release - Publishes to ~/releases/maven/release.
The maven artifacts are described in MavenArtifacts.md
The main WPILib code you're probably looking for is in WPILibJ and WPILibC. Those directories are split into shared, sim, and athena. Athena contains the WPILib code meant to run on your roboRIO. Sim is WPILib code meant to run on your computer with Gazebo, and shared is code shared between the two. Shared code must be platform-independent, since it will be compiled with both the ARM cross-compiler and whatever desktop compiler you are using (g++, msvc, etc...).
The Simulation directory contains extra simulation tools and libraries, such as gz_msgs and JavaGazebo. See sub-directories for more information.
The integration test directories for C++ and Java contain test code that runs on our test-system. When you submit code for review, it is tested by those programs. If you add new functionality you should make sure to write tests for it so we don't break it in the future.
The hal directory contains more C++ code meant to run on the roboRIO. HAL is an acronym for "Hardware Abstraction Layer", and it interfaces with the NI Libraries. The NI Libraries contain the low-level code for controlling devices on your robot. The NI Libraries are found in the ni-libraries folder.
The styleguide repository contains our style guides for C++ and Java code. Anything submitted to the WPILib project needs to follow the code style guides outlined in there. For details about the style, please see the contributors document here.
See CONTRIBUTING.md.