card-io-ecg/card-io-fw

Issues

• EKG render autoranging is still very jumpy

  #150 opened a year ago by bugadani
  0

• Don't print "Measurement too short" message if it's discarded anyway

  #156 opened a year ago by bugadani
  0

• Scan for wifi networks while AP is active

  #30 opened a year ago by bugadani
  0

• Add option to select which lead to display if there are multiple options

  #149 opened a year ago by bugadani
  0

• Add metadata to measurement format

  #148 opened a year ago by bugadani
  0

• Human readable printer may print an unnecessary trailing 0

  #146 opened a year ago by bugadani
  0

• Add option to use device upside-down

  #145 opened a year ago by bugadani
  0

• Remove workarounds

  #131 opened a year ago by bugadani
  0

• Add option to revert to last firmware if available

  #136 opened a year ago by bugadani
  0

• Option to show QR code with measurement ID

  #134 opened a year ago by bugadani
  0

• Wifi connectivity/data upload tracking issue

  #46 opened 2 years ago by bugadani
  0

• RTC timekeeping

  #98 opened a year ago by bugadani
  0

• Use a single version of (embassy) dependencies

  #47 opened a year ago by bugadani
  0

• Set up CI to check that examples compile

  #86 opened a year ago by bugadani
  0

• Only enable wifi if there is something to do

  #88 opened a year ago by bugadani
  0

• HR calculator can't recover after locking in on noise

  #19 opened a year ago by bugadani
  1

• Add option to do timed measurement that doesn't use lead-off detection

  #14 opened a year ago by bugadani
  1

• Configurable end-of-measurement action

  #120 opened a year ago by bugadani
  0

• Try to keep fuel gauge active

  #119 opened a year ago by bugadani
  0

• Tie in StatusBar with app context

  #101 opened a year ago by bugadani
  0

• Add DNS server

  #117 opened a year ago by bugadani
  0

• Upload stored files

  #116 opened a year ago by bugadani
  1

• Log with defmt

  #99 opened a year ago by bugadani
  0

• Add configurable backend URL(s?) to config

  #105 opened a year ago by bugadani
  0

• Consider using ADC for all touch input detection

  #104 opened a year ago by bugadani
  1

• Add battery statistics screen

  #54 opened a year ago by bugadani
  0

• Use fuel gauge alarm signal

  #97 opened a year ago by bugadani
  0

• Standby power optimization

  #58 opened a year ago by bugadani
  0

• Device wakes up immediately from sleep when charged and plugged in

  #72 opened a year ago by bugadani
  0

• Only display wifi options if battery is above 50% or is charging

  #84 opened a year ago by bugadani
  0

• Entering deep sleep breaks USB JTAG

  #53 opened a year ago by bugadani
  3

• Config site facelift

  #45 opened 2 years ago by bugadani
  1

• Device info: print more

  #80 opened a year ago by bugadani
  0

• Assign a serial number to the devices

  #76 opened a year ago by bugadani
  0

• Make firmware version visible

  #77 opened a year ago by bugadani
  0

• Exit wifi AP state after a delay if client disconnects

  #60 opened a year ago by bugadani
  0

• High idle power draw

  #57 opened a year ago by bugadani
  0

• Enable MAX17055 fuel gauge

  #44 opened 2 years ago by bugadani
  0

• Use TLS in embedded webserver

  #48 opened 2 years ago by bugadani
  0

• Run `cargo doc` through xtask

  #41 opened 2 years ago by bugadani
  0

• Provide a Wifi access point for connection management

  #25 opened 2 years ago by bugadani
  0

• Store and read settings from persistent memory

  #9 opened 2 years ago by bugadani
  2

• Startup animation

  #23 opened 2 years ago by bugadani
  1

• Allow entering menu while charging

  #27 opened 2 years ago by bugadani
  0

• Wait a bit after enabling ADC before collecting samples

  #20 opened 2 years ago by bugadani
  0

• Go to deep sleep when battery is low

  #15 opened 2 years ago by bugadani
  0

• Add option to configure battery status display

  #12 opened 2 years ago by bugadani
  0

• ECG display is "jumpy" if heart rate is low enough

  #10 opened 2 years ago by bugadani
  0

• Force-unconfigure ADC during startup in development mode

  #18 opened 2 years ago by bugadani
  0

• Release ADC chip select when inactive

  #11 opened 2 years ago by bugadani
  0