enigma2 Support for Homey

This Project allows Control of Enigma2 devices via Homey over TCP/IP

Requirements

openWebif needs to be available on the enigma2 device
Setup of enigma2 App via Homey required. Start Homey App, open the More section, select Apps Menu, open enigma2 entry and Click on "Configure app"

Support Overview

when / trigger flowcards

polling required, therefor currently not decided. If you like to put in arguments, visit Athom Community

and / condition flowcards

then / action flowcards

Supported Languages

🇳🇱 dutch - Thanks to Martin Timmermans
🇬🇧 english
🇩🇪 german
other Contribute here or file a pull request on GitHub

deep standby mode

WARNING: After this flowcard is executed you can't control the box over the Network Interface anymore!

Messages

During the Input you need to make sure you follow these Format: Type|Timeout|Message inbetween the different Sections no Spaces are required. Here are the different Supported Variables: Type:

0 = Yes / No (currently only Display, no action yet implemented)
1 = Info Message
2 = Plain Message
3 = Attention Message

Timeout:

set it to 0 to be endless displayed or Provide Time in seconds

Message:

Type your Text here, to make a new line use \n in the Text without a Space afterwards.

For Supported Devices check the following

Due to limited access to all enigma2 enabled devices, i was only able to test the functions at an Dreambox 800HDse and a few less on an VU+ duo2, if any Issues are observed, please file an Issue on GitHub or Post to the Athom Community Forum Topic.

Check Google Spreadsheet: Google Spreadsheet Green = Fully Supported
empty Green = Not Programmed in this Device
Pictures of the Boxes can be found here: OpenWebif Box Pictures
Pictures of the Remotes can be found here: OpenWebif Remote Pictures

carp3-noctem/eu.carp3-noctem.enigma2