/ArduinoSIM800L

Arduino HTTP & FTP client for SIM800L/SIM800 boards to perform GET and POST requests to a JSON API as well as FTP uploads.

Primary LanguageC++

Donate

Arduino SIM800L library

A smart HTTP & FTP library based on Seeeduino that implements the AT HTTP commands to perform GET and POST requests to a JSON API as well as FTP uploads.

Support

  • Your board has to support the standard SoftwareSerial library. It doesn't work with HardwareSerial based boards for the moment.
  • The API response format has to be a valid JSON.
  • The library has been tested against Arduino Uno and Arduino Nano.

Instalation

Download the ZIP library and then import it: Sketch -> Include Library -> Add .ZIP Library ...

Quick start!

How to do a GET request! 👍

unsigned int RX_PIN = 7;
unsigned int TX_PIN = 8;
unsigned int RST_PIN = 12;

const char BEARER[] PROGMEM = "gprs-service.com";

HTTP http(9600, RX_PIN, TX_PIN, RST_PIN);
http.connect(BEARER);

char response[256];
Result result = http.get("your.api.com", response);

Serial.println(response);

http.disconnect();

How to do a POST request! 👍

unsigned int RX_PIN = 7;
unsigned int TX_PIN = 8;
unsigned int RST_PIN = 12;
const char BEARER[] PROGMEM = "gprs-service.com";

HTTP http(9600, RX_PIN, TX_PIN, RST_PIN);
http.connect(BEARER);

char response[256];
Result result = http.post("your.api.com", "{\"date\":\"12345678\"}", response);

Serial.println(response);

http.disconnect();

How to do a FTP upload! 👍

unsigned int RX_PIN = 7;
unsigned int TX_PIN = 8;
unsigned int RST_PIN = 12;
const char BEARER[] PROGMEM = "gprs-service.com";
const char FTP_SERVER[] PROGMEM = "ftp.server";
const char FTP_USER[] PROGMEM = "user";
const char FTP_PASS[] PROGMEM = "pass";

FTP ftp(9600, RX_PIN, TX_PIN, RST_PIN);
ftp.putBegin(BEARER, "example.txt", FTP_SERVER, FTP_USER, FTP_PASS);
ftp.putWrite("hello!", sizeof("hello!"));
ftp.putEnd();

I suggest the ArduinoJSON library for parsing the JSON response, then you can play with the values easily.

HTTP. How it works?

In order to perform a request, the library follows these steps:

Configure Bearer:
  • AT+CREG? -> try until 0,1 (connected to the network)
  • AT+SAPBR=3,1,"Contype","GPRS" -> wait for OK
  • AT+SAPBR=3,1,"APN","movistar.es" -> wait for OK
  • AT+SAPBR=1,1 -> wait for OK
HTTP GET:
  • AT+HTTPINIT -> wait for OK
  • AT+HTTPPARA="CID",1 -> wait for OK
  • AT+HTTPPARA="URL","your.api.com"-> wait for OK
  • AT+HTTPSSL=0 -> wait for OK (1 when URL starts with "https://")
  • AT+HTTPACTION=0 -> wait for 200
  • AT+HTTPREAD -> read buffer and parse it
  • AT+HTTPTERM -> wait for OK
  • AT+SAPBR=0,1
HTTP POST:
  • AT+HTTPINIT -> wait for OK
  • AT+HTTPPARA="CID",1 -> wait for OK
  • AT+HTTPPARA="URL","your.api.com" -> wait for OK

For example, if we have this body: {"location_id": 238, "fill_percent": 90}

  • AT+HTTPPARA="CONTENT","application/json"
  • AT+HTTPDATA=strlen(body),10000 -> wait for DOWNLOAD, then write the body and wait 10000
  • AT+HTTPSSL=0 -> wait for OK (1 when URL starts with "https://")
  • AT+HTTPACTION=1 -> wait for ,200,
  • AT+HTTPREAD -> read buffer and parse it
  • AT+HTTPTERM -> wait for OK
  • AT+SAPBR=0,1

Future improvements

  • Support of HardwareSerial.
  • Support of more content types, not only JSON (application/json).

Development

  • Lint: cppcheck --enable=all .