penClip3D-brasses
Pencil Clip for Brass Instruments (the bests, especially trombone) to be 3D printed.
The repo contains also previous designs (I wouldn't recommend you to use them since might be too loose or too tight) and download-&-print files (.gcode)
I personally use a Creality Ender-3 with the following settings:
- Layer Height: 22 mm
- Wall thickness: 0.8 mm (2 Wall Lines)
- Top/Bottom layers: 4
- Ironing: Enabled ✓
- Ironing Speed: 10 mm/s
- Infill Density: 15%
- Infill Patter: Quarter Cubic
- Printing Temperature: 200°C
- Buil Plate: 60°C
- Print Speed: 150 mm/s
- Initial Layer Speed: 60 mm/s
- Enable Retraction: Enabled ✓
- Retraction Distance: 5 mm
- Retraction Speed: 50 mm/s
- Enable Print Cooling: Enabled ✓
- Fan Speed: 100%
- Generate Support: Disabled X
Of course, feel free to experiment with any other settings and modify the original design.