Very simple script to set the color of a Dell G5 5000 front stripe LED python3 led.py red python3 led.py off requires pyusb - pip install pyusb I use it from systemd to turn it off at startup. A useful source of learning about the mysterious controller - it's not like other AlienWare LED controllers as seen by OpenRGB. For OpenRgb, the platform_id is 0x0901 - one zone. Uncomment the 'print' in elc_ng.py to see what is sent to the controller. For example g5stripe$ `python led.py green` dt: b"\x03'\x00\xff\x00\x00\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" I mentioned this in this thread https://gitlab.com/CalcProgrammer1/OpenRGB/-/issues/2507 -Cecil Coupe, Feb 15, 2023 From: https://gist.github.com/Cheaterman/2d166b510adc5eb9d582eaa83282c410 and https://gist.github.com/Cheaterman/accd912c6886f4055f45d0594b88553c Found in this discussion rsm-gh/akbl#74