cdsteinkuehler/beaglebone-universal-io
Device tree overlay and support scripts for using most available hardware I/O on the BeagleBone without editing dts files or rebuilding the kernel
ShellGPL-2.0
Issues
- 2
Error, Invalid mode: in
#60 opened by SmartFactory-github - 0
- 5
changing SPI1 D0 as output
#40 opened by rifotu - 1
pinmux file not found on Linux arm 3.14.41-ti-r63
#35 opened by AdamSLevy - 11
Error when loading overlay.
#21 opened by rvega - 0
- 4
can the systemd messages be disabled?
#56 opened by bigguiness - 0
- 1
CAN doesn't work
#50 opened by HerpVanDerp - 1
enabling eQEP1 pins in kernel 3.8.13-xenomai-r83
#55 opened by DDoIt - 0
- 0
- 0
trouble with mapping P8.40
#51 opened by jonturner53 - 0
Wait for cape to appear instead of sleep
#49 opened by machinekoder - 0
Missing pinmux state file when using am335x-boneblack-overlay.dtb on 4.4.52-ti-r91
#47 opened by nallenscott - 3
- 1
enabling eQEP pins in kernel 4.4.x
#44 opened by theonteg - 6
Could not find symbol 'gpio4'
#43 opened by Biffco - 1
Loading cape-universala
#39 opened by jellespijker - 6
Loading cape-univ-audio and univ-hdmi
#37 opened - 2
make install not working
#38 opened by Nafina - 5
loading firmware
#36 opened by thisboyiscrazy - 1
kernel 4.1 check is incorrect, breaks config-pin
#33 opened by plauria - 0
Can I use this cape for I2C communication?
#31 opened by adityapatadia - 1
Multiple overlays
#29 opened by bobvanderlinden - 1
Elaborate on 3.14+ support
#28 opened by ToBeReplaced - 1
use with debian on BBB
#27 opened by tomerdzf - 3
change mode of dcan1_tx
#25 opened by MartinVoelz - 5
- 3
Makefile for crosscompile environment
#24 opened by MartinVoelz - 8
P9_29 & P9_31 have wrong gpio numbers
#18 opened by SwarfEye - 2
- 2
- 4
Why no setting with HDMI disabled?
#7 opened by jadonk - 2
compile error
#6 opened by pkd2512