/clusternet

Managing your Kubernetes clusters (including public, private, edge, etc) as easily as visiting the Internet

Primary LanguageGoApache License 2.0Apache-2.0

Clusternet

GoPkg Widget License GoVersion Go Report Card build Version

Managing Your Clusters (including public, private, hybrid, edge, etc) as easily as Visiting the Internet.

Clusternet (Cluster Internet) is an open source add-on that helps you manage thousands of millions of Kubernetes clusters as easily as visiting the Internet. No matter the clusters are running on public cloud, private cloud, hybrid cloud, or at the edge, Clusternet lets you manage/visit them all as if they were running locally. This also help eliminate the need to juggle different management tools for each cluster.

Clusternet can also help deploy and coordinate applications to multiple clusters from a single set of APIs in a hosting cluster.

Clusternet will help setup network tunnels in a configurable way, when your clusters are running in a VPC network, at the edge, or behind a firewall.

Clusternet also provides a Kubernetes-styled API, where you can continue using the Kubernetes way, such as KubeConfig, to visit a certain Managed Kubernetes cluster, or a Kubernetes service.

Clusternet is multiple platforms supported now, including

  • darwin/amd64 and darwin/arm64;
  • linux/amd64, linux/arm64, linux/ppc64le, linux/s390x, linux/386 and linux/arm;

Architecture

Clusternet is light-weighted that consists of two components, clusternet-agent and clusternet-hub.

clusternet-agent is responsible for

  • auto-registering current cluster to a parent cluster as a child cluster, which is also been called ManagedCluster;
  • reporting heartbeats of current cluster, including Kubernetes version, running platform, healthz/readyz/livez status, etc;
  • setting up a websocket connection that provides full-duplex communication channels over a single TCP connection to parent cluster;

clusternet-hub is responsible for

  • approving cluster registration requests and creating dedicated resources, such as namespaces, serviceaccounts and RBAC rules, for each child cluster;
  • serving as an aggregated apiserver (AA), which is used to serve as a websocket server that maintain multiple active websocket connections from child clusters;
  • providing Kubernstes-styled API to redirect/proxy/upgrade requests to each child cluster;
  • coordinating and deploying applications to multiple clusters from a single set of APIs;

📌 📌 Note:

Since clusternet-hub is running as an AA, please make sure that parent apiserver could visit the clusternet-hub service.

Concepts

For every Kubernetes cluster that wants to be managed, we call it child cluster. The cluster where child clusters are registerring to, we call it parent cluster.

clusternet-agent runs in child cluster, while clusternet-hub runs in parent cluster.

  • ClusterRegistrationRequest is an object that clusternet-agent creates in parent cluster for child cluster registration.
  • ManagedCluster is an object that clusternet-hub creates in parent cluster after approving ClusterRegistrationRequest.
  • HelmChart is an object contains a helm chart configuration.
  • Subscription defines the resources that subscribers want to install into clusters. For every matched cluster, a corresponding Base object will be created in its dedicated namespace.
  • Localization and Globalization will define the overrides with priority, where lower numbers are considered lower priority. Localization is namespace-scoped resource, while Globalization is cluster-scoped.
  • Base objects will be rendered to Description objects with Globalization and Localization settings applied. Descritpion is the final resources to be deployed into target child clusters.

Contributing & Developing

If you want to get participated and become a contributor to Clusternet, please don't hesitate to refer to our CONTRIBUTING document for details.

A developer guide is ready to help you

  • build binaries for all platforms, such as darwin/amd64, linux/amd64, linux/arm64, etc;
  • build docker images for multiple platforms, such as linux/amd64, linux/arm64, etc;

Getting Started

Deploying Clusternet

You need to deploy clusternet-agent and clusternet-hub in child cluster and parent cluster respectively.

Deploying clusternet-hub in parent cluster

$ kubectl apply -f deploy/hub

And then create a bootstrap token for clusternet-agent,

$ # this will create a bootstrap token 07401b.f395accd246ae52d
$ kubectl apply -f manifests/samples/cluster_bootstrap_token.yaml

Deploying clusternet-agent in child cluster

clusternet-agent runs in child cluster and helps register self-cluster to parent cluster.

clusternet-agent could be configured with below three kinds of SyncMode (configured by flag --cluster-sync-mode),

  • Push means that all the resource changes in the parent cluster will be synchronized, pushed and applied to child clusters by clusternet-hub automatically.
  • Pull means clusternet-agent will watch, synchronize and apply all the resource changes from the parent cluster to child cluster.
  • Dual combines both Push and Pull mode. This mode is strongly recommended, which is usually used together with feature gate AppPusher.

Feature gate AppPusher works on agent side, which is introduced mainly for below two reasons,

  • SyncMode is not suggested getting changed after registration, which may bring in inconsistent settings and behaviors. That's why Dual mode is strong recommended. When Dual mode is set, feature gate AppPusher provides a way to help switch Push mode to Pull mode without really changing flag --cluster-sync-mode, and vice versa.

  • For security concerns, such as child cluster security risks, etc.

    When a child cluster has disabled feature gate AppPusher, the parent cluster won't deploy any applications to it, even if SyncMode Push or Dual is set. At this time, this child cluster is working like Pull mode.

    Resources to be deployed are represented as Description, you can run your own controllers as well to watch changes of Description objects, then distribute and deploy resources.

Upon deploying clusternet-agent, a secret that contains token for cluster registration should be created firstly.

$ # create namespace clusternet-system if not created
$ kubectl create ns clusternet-system
$ # here we use the token created above
$ PARENTURL=https://192.168.10.10 REGTOKEN=07401b.f395accd246ae52d envsubst < ./deploy/templates/clusternet_agent_secret.yaml | kubectl apply -f -

The PARENTURL above is the apiserver address of the parent cluster that you want to register to, the https scheme must be specified and it is the only one supported at the moment. If the apiserver is not listening on the standard https port (:443), please specify the port number in the URL to ensure the agent connects to the right endpoint, for instance, https://192.168.10.10:6443.

$ # before deploying, you could update the SyncMode if needed
$ kubectl apply -f deploy/agent

Check Cluster Registrations

$ # clsrr is an alias for ClusterRegistrationRequest
$ kubectl get clsrr
NAME                                              CLUSTER ID                             STATUS     AGE
clusternet-dc91021d-2361-4f6d-a404-7c33b9e01118   dc91021d-2361-4f6d-a404-7c33b9e01118   Approved   3d6h
$ kubectl get clsrr clusternet-dc91021d-2361-4f6d-a404-7c33b9e01118 -o yaml
apiVersion: clusters.clusternet.io/v1beta1
kind: ClusterRegistrationRequest
metadata:
  labels:
    clusters.clusternet.io/cluster-id: dc91021d-2361-4f6d-a404-7c33b9e01118
    clusters.clusternet.io/cluster-name: clusternet-cluster-dzqkw
    clusters.clusternet.io/registered-by: clusternet-agent
  name: clusternet-dc91021d-2361-4f6d-a404-7c33b9e01118
spec:
  clusterId: dc91021d-2361-4f6d-a404-7c33b9e01118
  clusterName: clusternet-cluster-dzqkw
  clusterType: EdgeCluster
status:
  caCertificate: REDACTED
  dedicatedNamespace: clusternet-dhxfs
  managedClusterName: clusternet-cluster-dzqkw
  result: Approved
  token: REDACTED

After ClusterRegistrationRequest is approved, the status will be updated with corresponding credentials that can be used to access parent cluster if needed. Those credentials have been set with scoped RBAC rules, see blow two rules for details.

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  annotations:
    clusternet.io/autoupdate: "true"
  labels:
    clusters.clusternet.io/bootstrapping: rbac-defaults
    clusters.clusternet.io/cluster-id: dc91021d-2361-4f6d-a404-7c33b9e01118
    clusternet.io/created-by: clusternet-hub
  name: clusternet-dc91021d-2361-4f6d-a404-7c33b9e01118
rules:
  - apiGroups:
      - clusters.clusternet.io
    resources:
      - clusterregistrationrequests
    verbs:
      - create
      - get
  - apiGroups:
      - proxies.clusternet.io
    resourceNames:
      - dc91021d-2361-4f6d-a404-7c33b9e01118
    resources:
      - sockets
    verbs:
      - '*'

and

apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  annotations:
    clusternet.io/autoupdate: "true"
  labels:
    clusters.clusternet.io/bootstrapping: rbac-defaults
    clusternet.io/created-by: clusternet-hub
  name: clusternet-managedcluster-role
  namespace: clusternet-dhxfs
rules:
  - apiGroups:
      - '*'
    resources:
      - '*'
    verbs:
      - '*'

Check ManagedCluster Status

$ # mcls is an alias for ManagedCluster
$ # kubectl get mcls -A
$ # or append "-o wide" to display extra columns
$ kubectl get mcls -A -o wide
NAMESPACE          NAME                       CLUSTER ID                             CLUSTER TYPE   SYNC MODE   KUBERNETES   READYZ   AGE
clusternet-dhxfs   clusternet-cluster-dzqkw   dc91021d-2361-4f6d-a404-7c33b9e01118   EdgeCluster    Dual        v1.19.10     true     7d23h
$ kubectl get mcls -n clusternet-dhxfs   clusternet-cluster-dzqkw -o yaml
apiVersion: clusters.clusternet.io/v1beta1
kind: ManagedCluster
metadata:
  labels:
    clusters.clusternet.io/cluster-id: dc91021d-2361-4f6d-a404-7c33b9e01118
    clusters.clusternet.io/cluster-name: clusternet-cluster-dzqkw
    clusternet.io/created-by: clusternet-agent
  name: clusternet-cluster-dzqkw
  namespace: clusternet-dhxfs
spec:
  clusterId: dc91021d-2361-4f6d-a404-7c33b9e01118
  clusterType: EdgeCluster
  syncMode: Dual
status:
  apiserverURL: http://10.0.0.10:8080
  appPusher: true
  healthz: true
  k8sVersion: v1.19.10
  lastObservedTime: "2021-06-30T08:55:14Z"
  livez: true
  platform: linux/amd64
  readyz: true

The status of ManagedCluster is updated by clusternet-agent every 3 minutes for default, which can be configured by flag --cluster-status-update-frequency.

Visit ManagedCluster With RBAC

Clusternet supports visiting all your managed clusters with RBAC.

There is one prerequisite here, that is kube-apiserver should allow anonymous requests. The flag --anonymous-auth is set to be true by default. So you can just ignore this unless this flag is set to false explicitly.

Actually what you need is to

  1. Append /apis/proxies.clusternet.io/v1alpha1/sockets/<CLUSTER-ID>/proxy/https/<SERVER-URL> or /apis/proxies.clusternet.io/v1alpha1/sockets/<CLUSTER-ID>/proxy/direct at the end of original parent cluster server address

    • CLUSTER-ID is a UUID for your child cluster, which is auto-populated by clusternet-agent, such as dc91021d-2361-4f6d-a404-7c33b9e01118. You could get this UUID from objects ClusterRegistrationRequest, ManagedCluster, etc. Also this UUID is labeled with key clusters.clusternet.io/cluster-id.

    • SERVER-URL is the apiserver address of your child cluster, it could be localhost, 127.0.0.1 and etc, only if clusternet-agent could access.

    You can follow below commands to help modify above changes.

    $ # suppose your parent cluster kubeconfig locates at /home/demo/.kube/config.parent
$ kubectl config view --kubeconfig=/home/demo/.kube/config.parent --minify=true --raw=true > ./config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
$
$ export KUBECONFIG=`pwd`/config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
$ kubectl config view
apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: DATA+OMITTED
    server: https://10.0.0.10:6443
  name: kubernetes
contexts:
- context:
    cluster: kubernetes
    user: kubernetes-admin
  name: kubernetes-admin@kubernetes
current-context: kubernetes-admin@kubernetes
kind: Config
preferences: {}
users:
- name: kubernetes-admin
  user:
    client-certificate-data: REDACTED
    client-key-data: REDACTED
$
$ # suppose your child cluster running at https://demo1.cluster.net
$ kubectl config set-cluster `kubectl config get-clusters | grep -v NAME` \
  --server=https://10.0.0.10:6443/apis/proxies.clusternet.io/v1alpha1/sockets/dc91021d-2361-4f6d-a404-7c33b9e01118/proxy/https/demo1.cluster.net
$ # or just use the direct proxy path
$ kubectl config set-cluster `kubectl config get-clusters | grep -v NAME` \
  --server=https://10.0.0.10:6443/apis/proxies.clusternet.io/v1alpha1/sockets/dc91021d-2361-4f6d-a404-7c33b9e01118/proxy/direct

    📌 📌 Note:

    Clusternet supports both http and https scheme.

    If you want to use scheme http to demonstrate how it works, i.e. /apis/proxies.clusternet.io/v1alpha1/sockets/<CLUSTER-ID>/proxy/http/<SERVER-URL>, you can simply run a local proxy in your child cluster, for example,

    $ kubectl proxy --address='10.212.0.7' --accept-hosts='^*$'

    Please replace 10.212.0.7 with your real local IP address.

    Then you can visit child cluster with http scheme. The KubeConfig here would be quite simple,

    apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: DATA+OMITTED
    server: https://10.0.0.10:6443/apis/proxies.clusternet.io/v1alpha1/sockets/dc91021d-2361-4f6d-a404-7c33b9e01118/proxy/http/10.212.0.7
  name: kubernetes
contexts:
- context:
    cluster: kubernetes
    user: kubernetes-admin
  name: kubernetes-admin@kubernetes
current-context: kubernetes-admin@kubernetes
kind: Config
preferences: {}
users:
- name: kubernetes-admin
  user:
    username: system:anonymous

  2. Then update user entry with credentials from child clusters

    🙈 🙈 Note:

    Clusternet-hub does not care about those credentials at all, passing them directly to child clusters.

    • If you're using tokens, such as bootstrap tokens, ServiceAccount tokens , etc, please follow below modifications.

      $ export KUBECONFIG=`pwd`/config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
$ # below is what we modified in above step 1
$ kubectl config view
apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: DATA+OMITTED
    server: https://10.0.0.10:6443/apis/proxies.clusternet.io/v1alpha1/sockets/dc91021d-2361-4f6d-a404-7c33b9e01118/proxy/direct
  name: kubernetes
contexts:
- context:
    cluster: kubernetes
    user: kubernetes-admin
  name: kubernetes-admin@kubernetes
current-context: kubernetes-admin@kubernetes
kind: Config
preferences: {}
users:
- name: kubernetes-admin
  user:
    client-certificate-data: REDACTED
    client-key-data: REDACTED
$
$ # modify user part to below
$ vim config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
  ...
  user:
    username: system:anonymous
    as: clusternet
    as-user-extra:
        clusternet-token:
            - BASE64-DECODED-PLEASE-CHANGE-ME

      Please replace BASE64-DECODED-PLEASE-CHANGE-ME to a token that valid from child cluster. Please notice the tokens replaced here should be base64 decoded.

    • If you're using TLS certificates, please follow below modifications.

      $ export KUBECONFIG=`pwd`/config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
$ # below is what we modified in above step 1
$ kubectl config view
apiVersion: v1
clusters:
- cluster:
    certificate-authority-data: DATA+OMITTED
    server: https://10.0.0.10:6443/apis/proxies.clusternet.io/v1alpha1/sockets/dc91021d-2361-4f6d-a404-7c33b9e01118/proxy/direct
  name: kubernetes
contexts:
- context:
    cluster: kubernetes
    user: kubernetes-admin
  name: kubernetes-admin@kubernetes
current-context: kubernetes-admin@kubernetes
kind: Config
preferences: {}
users:
- name: kubernetes-admin
  user:
    client-certificate-data: REDACTED
    client-key-data: REDACTED
$
$ # modify user part to below
$ vim config-cluster-dc91021d-2361-4f6d-a404-7c33b9e01118
  ...
  user:
    username: system:anonymous
    as: clusternet
    as-user-extra:
        clusternet-certificate:
            - CLIENT-CERTIFICATE-DATE-BASE64-ENCODED-PLEASE-CHANGE-ME
        clusternet-privatekey:
            - CLIENT-KEY-DATE-PLEASE-BASE64-ENCODED-CHANGE-ME

      Please replace CLIENT-CERTIFICATE-DATE-BASE64-ENCODED-PLEASE-CHANGE-ME and CLIENT-KEY-DATE-PLEASE-BASE64-ENCODED-CHANGE-ME with certficate and private key from child cluster. Please notice the tokens replaced here should be base64 encoded.

How to Interact with Clusternet

Clusternet has provided two ways to help interact with Clusternet.

Deploying Applications to Multiple Clusters

Clusternet supports deploying applications to multiple clusters from a single set of APIs in a hosting cluster.

📌 📌 Note:

Feature gate Deployer should be enabled by clusternet-hub.

First, let's see an exmaple application. Below Subscription "app-demo" defines the target child clusters to be distributed to, and the resources to be deployed with.

# examples/applications/subscription.yaml
apiVersion: apps.clusternet.io/v1alpha1
kind: Subscription
metadata:
  name: app-demo
  namespace: default
spec:
  subscribers: # defines the clusters to be distributed to
    - clusterAffinity:
        matchLabels:
          clusters.clusternet.io/cluster-id: dc91021d-2361-4f6d-a404-7c33b9e01118 # PLEASE UPDATE THIS CLUSTER-ID TO YOURS!!!
  feeds: # defines all the resources to be deployed with
    - apiVersion: apps.clusternet.io/v1alpha1
      kind: HelmChart
      name: mysql
      namespace: default
    - apiVersion: v1
      kind: Namespace
      name: foo
    - apiVersion: apps/v1
      kind: Service
      name: my-nginx-svc
      namespace: foo
    - apiVersion: apps/v1
      kind: Deployment
      name: my-nginx
      namespace: foo

Before applying this Subscription, please modify examples/applications/subscription.yaml with your clusterID.

After installing kubectl plugin kubectl-clusternet, you could run below commands to distribute this application to child clusters.

$ kubectl clusternet apply -f examples/applications/
helmchart.apps.clusternet.io/mysql created
namespace/foo created
deployment.apps/my-nginx created
service/my-nginx-svc created
subscription.apps.clusternet.io/app-demo created
$ # or
$ # kubectl-clusternet apply -f examples/applications/

Then you can view the resources just created,

$ # list Subscription
$ kubectl clusternet get subs -A
NAMESPACE   NAME       AGE
default     app-demo   6m4s
$ kubectl clusternet get chart
NAME             CHART   VERSION   REPO                                 STATUS   AGE
mysql            mysql   8.6.2     https://charts.bitnami.com/bitnami   Found    71s
$ kubectl clusternet get ns
NAME   CREATED AT
foo    2021-08-07T08:50:55Z
$ kubectl clusternet get svc -n foo
NAME           CREATED AT
my-nginx-svc   2021-08-07T08:50:57Z
$ kubectl clusternet get deploy -n foo
NAME       CREATED AT
my-nginx   2021-08-07T08:50:56Z

Clusternet will help deploy and coordinate applications to multiple clusters. You can check the status by following commands,

$ kubectl clusternet get mcls -A
NAMESPACE          NAME                       CLUSTER ID                             SYNC MODE   KUBERNETES   READYZ   AGE
clusternet-5l82l   clusternet-cluster-hx455   dc91021d-2361-4f6d-a404-7c33b9e01118   Dual        v1.21.0      true     5d22h
$ # list Descriptions
$ kubectl clusternet get desc -A
NAMESPACE          NAME               DEPLOYER   STATUS    AGE
clusternet-5l82l   app-demo-generic   Generic    Success   2m55s
clusternet-5l82l   app-demo-helm      Helm       Success   2m55s
$ kubectl describe desc -n clusternet-5l82l   app-demo-generic
...
Status:
  Phase:  Success
Events:
  Type    Reason                Age    From            Message
  ----    ------                ----   ----            -------
  Normal  SuccessfullyDeployed  2m55s  clusternet-hub  Description clusternet-5l82l/app-demo-generic is deployed successfully
$ # list Helm Release
$ # hr is an alias for HelmRelease
$ kubectl clusternet get hr -n clusternet-5l82l
NAME                  CHART       VERSION   REPO                                 STATUS     AGE
helm-demo-mysql       mysql       8.6.2     https://charts.bitnami.com/bitnami   deployed   2m55s

You can also verify the installation with Helm command line in your child cluster,

$ helm ls -n abc
NAME               	NAMESPACE	REVISION	UPDATED                             	STATUS  	CHART            	APP VERSION
helm-demo-mysql    	abc      	1       	2021-07-06 14:34:44.188938 +0800 CST	deployed	mysql-8.6.2      	8.0.25