Does not work with Epever XTRA 3210N
Closed this issue · 2 comments
mager33 commented
No live data, no historical data, but load switch works. Any hints how to debug? (not sure if it relates to #6, as ther is no sun right now)
chickey commented
Hi Martin,
I’ve not experienced that before. If you plug it into a PC at the same time as it is connected to the charge controller then you can open up a connection the com port and see the output. It should periodically report the readings, will be interesting to see if they show up there.
Thanks
Colin
… On 23 Jan 2023, at 16:30, Martin ***@***.***> wrote:
No live data, no historical data, but load switch works. Any hints how to debug?
—
Reply to this email directly, view it on GitHub <#17>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAKSM7MAI3QDXVWRMR3DNQLWT2W2LANCNFSM6AAAAAAUEBRIY4>.
You are receiving this because you are subscribed to this thread.
mager33 commented
Actually, it was a bod contact on a breadboard setup - took me some time to figure out... finally switched to a ESPhome based solution to stay in the HomeAssistannt ecosystem. But your would have worked, too.