chirpstack/chirpstack-concentratord

Issues

• Model seeed_wm1302 doesn't work

  #176 opened 5 months ago by JackThird
  0

• Hardware configuration file

  #171 opened 5 months ago by map588
  3

• Process panicks upon start (Multitech Conduit, mPower 6.3.0)

  #167 opened 6 months ago by nicolas-juteau
  4

• Duty cycle tracking causes downlink to be rejected for antenna gains < 2dBi

  #157 opened 7 months ago by aurel32
  6

• AS923-3 on my Seeed WM1302 not working

  #150 opened 8 months ago by girnrajbir
  1

• For SPI's dev device address and resetting GPIO errors

  #152 opened 8 months ago by TelDragon
  5

• Crash when receiving configuration command?

  #114 opened 8 months ago by cyclops1982
  3

• Add GPS support for Waveshare SX1302 hat.

  #30 opened 2 years ago by errolt
  6

• Implement duty-cycle reporting / management

  #12 opened 9 months ago by brocaar
  0

• Feature Request for IN865 channel-plan concentratord region for Shield Model Waveshare - SX1302 LoRaWAN gateway HAT

  #128 opened a year ago by quartzpulse
  0

• Add config options for Reset/Power Chip/Line

  #122 opened a year ago by jdeinum
  7

• MTCAP3: wrong gateway_id reported by concentratord to mqtt-forwarder

  #127 opened a year ago by nicolas-juteau
  2

• Concentratord overrides static/dynamic metadata defined in mqtt-forwarder configuration file

  #123 opened a year ago by nicolas-juteau
  2

• Uplink stops being processed correctly by chirpstack if concentratord is used along with mqtt-forwarder with json=true

  #124 opened a year ago by nicolas-juteau
  2

• Waveshare 1302 Lorawan Gateway Hat - AU915 Support

  #92 opened a year ago by tvalles
  8

• Add support for the IMST iC280A

  #28 opened a year ago by vanStadenRJ
  1

• Add support for RAK7244C / GPS over I2C

  #105 opened a year ago by d4rkdpg
  0

• Chripstack-concentratord-sx1302 v4.3.0 crashed with Segmentation fault

  #107 opened a year ago by LouneCode
  6

• Seeed WM1302 downlink message issue

  #85 opened a year ago by kartsan
  4

• chirpstack-concentratord-sx1302 fails to start with RAK2287 USB GPS EU868

  #23 opened a year ago by muhlpachr
  2

• Request AS923 and US915 support for Seeed WM1302 module

  #38 opened a year ago by hereismeaw
  1

• Default metadata configurability

  #64 opened a year ago by mullerch
  1

• Request AS923 channel-plan region for Shield Model Seeed WM1302 / Seeed WM1303

  #86 opened a year ago by eddyantow
  1

• Chirpstack-consertratord-sx1302 backend - Fine Timestamp is missing from uplink event?

  #65 opened 2 years ago by LouneCode
  3

• add Semtech SX1302 CoreCell CN490 to chirpstack-concentratord

  #26 opened 2 years ago by blockchain4trust
  1

• LoRa server with RAK5146 (using mini PCI to USB) and Raspberry Pi3

  #43 opened 2 years ago by saroguti
  1

• Add fake RX time option

  #49 opened 2 years ago by mullerch
  3

• Provide an option to forward packets with bad/missing CRC

  #29 opened 2 years ago by mullerch
  3

• Allow the use of USB connected GPS

  #31 opened 2 years ago by errolt
  5

• Add SX1302 LoraWAN Gateway HAT for ChirpStack OS Gateway and Raspberry PI 4B

  #27 opened 2 years ago by dyane6
  17

• Add option to allow reset pin numbers on different chip sets

  #15 opened 3 years ago by riplatt
  1

• Pi Supply - Lora Gateway Hat - Support for AU915 Channel Plan

  #19 opened 3 years ago by trick-1
  5

• wrapper.h:3:10: fatal error: 'libloragw-sx1302/loragw_com.h' file not found

  #20 opened 3 years ago by houzy
  2

• Support for RAK2287

  #17 opened 4 years ago by ST33LDI9ITAL
  1

• Fixed Longitude and Latitude as in Semtech Packet_forwarder

  #14 opened 4 years ago by omogenot
  0

• Set reset pin for concentratord : IMST ic880A

  #11 opened 4 years ago by kaboelliotpule
  19

• Poly packet forward feature

  #9 opened 4 years ago by fernandobarreto
  2

• GPS time reference is not valid (Multitech)

  #13 opened 4 years ago by chopmann
  6

• Set reset pin for concentratord : IMST ic880A

  #10 opened 4 years ago by kaboelliotpule
  0

• How i change reset pin in config?

  #1 opened 5 years ago by erdmanncross
  9

• Add missing RAK245 model configuration

  #6 opened 5 years ago by brocaar
  2

• Is GPS required

  #2 opened 5 years ago by mrbubble62
  12