chrishenzie/efs-utils

Utilities for Amazon Elastic File System (EFS)

efs-utils

Utilities for Amazon Elastic File System (EFS)

The efs-utils package has been verified against the following Linux distributions:

Distribution	Package Type	init System
Amazon Linux 2017.09	rpm	upstart
Amazon Linux 2	rpm	systemd
CentOS 7	rpm	systemd
CentOS 8	rpm	systemd
RHEL 7	rpm	systemd
RHEL 8	rpm	systemd
Fedora 28	rpm	systemd
Fedora 29	rpm	systemd
Fedora 30	rpm	systemd
Fedora 31	rpm	systemd
Fedora 32	rpm	systemd
Debian 9	deb	systemd
Debian 10	deb	systemd
Ubuntu 16.04	deb	systemd
Ubuntu 18.04	deb	systemd
Ubuntu 20.04	deb	systemd
OpenSUSE Leap	rpm	systemd
OpenSUSE Tumbleweed	rpm	systemd
SLES 12	rpm	systemd
SLES 15	rpm	systemd

The efs-utils package has been verified against the following MacOS distributions:

Distribution	init System
MacOS Big Sur	launchd

Prerequisites

• nfs-utils (RHEL/CentOS/Amazon Linux/Fedora) or nfs-common (Debian/Ubuntu)
• OpenSSL 1.0.2+
• Python 3.4+
• stunnel 4.56+

Installation

On Amazon Linux distributions

For those using Amazon Linux or Amazon Linux 2, the easiest way to install efs-utils is from Amazon's repositories:

$ sudo yum -y install amazon-efs-utils

Install via AWS Systems Manager Distributor

You can now use AWS Systems Manage Distributor to automatically install or update amazon-efs-utils. Please refer to Using AWS Systems Manager to automatically install or update Amazon EFS clients for more guidance.

The following are prerequisites for using AWS Systems Manager Distributor to install or update amazon-efs-utils:

1. AWS Systems Manager agent is installed on the distribution (For Amazon Linux and Ubuntu, AWS Systems Manager agent is pre-installed, for other distributions, please refer to install AWS Systems Manager agent on Linux EC2 instance for more guidance.)

2. Instance is attached with IAM role with AWS managed policy AmazonElasticFileSystemsUtils, this policy will enable your instance to be managed by AWS Systems Manager agent, also it contains permissions to support specific features.

On other Linux distributions

Other distributions require building the package from source and installing it.

• To build and install an RPM:

If the distribution is not OpenSUSE or SLES

$ sudo yum -y install git rpm-build make
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ make rpm
$ sudo yum -y install build/amazon-efs-utils*rpm

Otherwise

$ sudo zypper refresh
$ sudo zypper install -y git rpm-build make
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ make rpm
$ sudo zypper --no-gpg-checks install -y build/amazon-efs-utils*rpm

On OpenSUSE, if you see error like File './suse/noarch/bash-completion-2.11-2.1.noarch.rpm' not found on medium 'http://download.opensuse.org/tumbleweed/repo/oss/' during installation of git, run the following commands to re-add repo OSS and NON-OSS, then run the install script above again.

sudo zypper ar -f -n OSS http://download.opensuse.org/tumbleweed/repo/oss/ OSS
sudo zypper ar -f -n NON-OSS http://download.opensuse.org/tumbleweed/repo/non-oss/ NON-OSS
sudo zypper refresh

• To build and install a Debian package:

$ sudo apt-get update
$ sudo apt-get -y install git binutils
$ git clone https://github.com/aws/efs-utils
$ cd efs-utils
$ ./build-deb.sh
$ sudo apt-get -y install ./build/amazon-efs-utils*deb

On MacOS Big Sur distribution

For EC2 Mac instances running macOS Big Sur, you can install amazon-efs-utils from the homebrew-aws respository.

brew install amazon-efs-utils

This will install amazon-efs-utils on your EC2 Mac Instance running macOS Big Sur in the directory /usr/local/Cellar/amazon-efs-utils. At the end of the installation, it will print a set of commands that must be executed in order to start using efs-utils. The instructions that are printed after amazon-efs-utils and must be executed are:

Perform below actions to start using efs:
    sudo mkdir -p /Library/Filesystems/efs.fs/Contents/Resources
    sudo ln -s /usr/local/bin/mount.efs /Library/Filesystems/efs.fs/Contents/Resources/mount_efs

Perform below actions to stop using efs:
    sudo rm /Library/Filesystems/efs.fs/Contents/Resources/mount_efs

To enable watchdog for using TLS mounts:
    sudo cp /usr/local/Cellar/amazon-efs-utils/<version>/libexec/amazon-efs-mount-watchdog.plist /Library/LaunchAgents
    sudo launchctl load /Library/LaunchAgents/amazon-efs-mount-watchdog.plist

To disable watchdog for using TLS mounts:
    sudo launchctl unload /Library/LaunchAgents/amazon-efs-mount-watchdog.plist

Run tests

• Set up a virtualenv for efs-utils

$ virtualenv ~/.envs/efs-utils
$ source ~/.envs/efs-utils/bin/activate
$ pip install -r requirements.txt

• Run tests

$ make test

Usage

mount.efs

efs-utils includes a mount helper utility to simplify mounting and using EFS file systems.

To mount with the recommended default options, simply run:

$ sudo mount -t efs file-system-id efs-mount-point/

To mount file system within a given network namespace, run:

$ sudo mount -t efs -o netns=netns-path file-system-id efs-mount-point/

To mount file system to the mount target in specific availability zone (e.g. us-east-1a), run:

$ sudo mount -t efs -o az=az-name file-system-id efs-mount-point/

To mount over TLS, simply add the tls option:

$ sudo mount -t efs -o tls file-system-id efs-mount-point/

To authenticate with EFS using the system’s IAM identity, add the iam option. This option requires the tls option.

$ sudo mount -t efs -o tls,iam file-system-id efs-mount-point/

To mount using an access point, use the accesspoint= option. This option requires the tls option. The access point must be in the "available" state before it can be used to mount EFS.

$ sudo mount -t efs -o tls,accesspoint=access-point-id file-system-id efs-mount-point/

To mount your file system automatically with any of the options above, you can add entries to /efs/fstab like:

file-system-id efs-mount-point efs _netdev,tls,iam,accesspoint=access-point-id 0 0

For more information on mounting with the mount helper, see the manual page:

man mount.efs

or refer to the documentation.

amazon-efs-mount-watchdog

efs-utils contains a watchdog process to monitor the health of TLS mounts. This process is managed by either upstart or systemd depending on your Linux distribution and launchd on Mac distribution, and is started automatically the first time an EFS file system is mounted over TLS.

Upgrading stunnel for RHEL/CentOS

By default, when using the EFS mount helper with TLS, it enforces certificate hostname checking. The EFS mount helper uses the stunnel program for its TLS functionality. Please note that some versions of Linux do not include a version of stunnel that supports TLS features by default. When using such a Linux version, mounting an EFS file system using TLS will fail.

Once you’ve installed the amazon-efs-utils package, to upgrade your system’s version of stunnel, see Upgrading Stunnel.

Upgrading stunnel for SLES12

Run the following commands and follow the output hint of zypper package manager to upgrade the stunnel on your SLES12 instance

sudo zypper addrepo https://download.opensuse.org/repositories/security:Stunnel/SLE_12_SP5/security:Stunnel.repo
sudo zypper refresh
sudo zypper install -y stunnel

Upgrading stunnel for MacOS

The installation installs latest stunnel available in brew repository. You can also upgrade the version of stunnel on your instance using the command below:

brew upgrade stunnel

Enable mount success/failure notification via CloudWatch log

efs-utils now support publishing mount success/failure logs to CloudWatch log. By default, this feature is disabled. There are three steps you must follow to enable and use this feature:

Step 1. Install botocore

efs-utils uses botocore to interact with CloudWatch log service . Please note the package type from the above table.

• Download the get-pip.py script

RPM

sudo yum -y install wget

if [[ "$(python3 -V 2>&1)" =~ ^(Python 3.5.*) ]]; then
    sudo wget https://bootstrap.pypa.io/3.5/get-pip.py -O /tmp/get-pip.py
elif [[ "$(python3 -V 2>&1)" =~ ^(Python 3.4.*) ]]; then
    sudo wget https://bootstrap.pypa.io/3.4/get-pip.py -O /tmp/get-pip.py
else
    sudo wget https://bootstrap.pypa.io/get-pip.py -O /tmp/get-pip.py
fi

DEB

sudo apt-get update
sudo apt-get -y install wget

if echo $(python3 -V 2>&1) | grep -e "Python 3.5"; then
    sudo wget https://bootstrap.pypa.io/3.5/get-pip.py -O /tmp/get-pip.py
elif echo $(python3 -V 2>&1) | grep -e "Python 3.4"; then
    sudo wget https://bootstrap.pypa.io/3.4/get-pip.py -O /tmp/get-pip.py
else
    sudo apt-get -y install python3-distutils
    sudo wget https://bootstrap.pypa.io/get-pip.py -O /tmp/get-pip.py
fi

• To install botocore on RPM

sudo python3 /tmp/get-pip.py
sudo pip3 install botocore || sudo /usr/local/bin/pip3 install botocore

• To install botocore on DEB

sudo python3 /tmp/get-pip.py
sudo pip3 install botocore || sudo /usr/local/bin/pip3 install botocore

On Debian10 and Ubuntu20, the botocore needs to be installed in specific target folder

sudo python3 /tmp/get-pip.py
sudo pip3 install --target /usr/lib/python3/dist-packages botocore || sudo /usr/local/bin/pip3 install --target /usr/lib/python3/dist-packages botocore

To install botocore on MacOS

sudo pip3 install botocore

Step 2. Enable CloudWatch log feature in efs-utils config file /etc/amazon/efs/efs-utils.conf

sudo sed -i -e '/\[cloudwatch-log\]/{N;s/# enabled = true/enabled = true/}' /etc/amazon/efs/efs-utils.conf

• For MacOS:

sudo sed -i -e '/\[cloudwatch-log\]/{N;s/# enabled = true/enabled = true/;}' /usr/local/Cellar/amazon-efs-utils/<version>/etc/amazon/efs/efs-utils.conf

You can also configure CloudWatch log group name and log retention days in the config file.

Step 3. Attach the CloudWatch logs policy to the IAM role attached to instance.

Attach AWS managed policy AmazonElasticFileSystemsUtils to the iam role you attached to the instance, or the aws credentials configured on your instance.

After completing the three prerequisite steps, you will be able to see mount status notifications in CloudWatch Logs.

License Summary

This code is made available under the MIT license.