Knapsack splits tests across CI nodes and makes sure that tests will run comparable time on each node.
Parallel tests across CI server nodes based on each test file's time execution. Knapsack generates a test time execution report and uses it for future test runs.
Presentations about gem:
Sign up to get info about launch Knapsack Pro with more features and free access for beta users.
Please check changelog before update gem. Knapsack follows semantic versioning.
Add those lines to your application's Gemfile:
group :test, :development do
gem 'knapsack'
end
And then execute:
$ bundle
Add at the beginning of your spec_helper.rb
:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
Knapsack::Adapters::RspecAdapter.bind
Create file features/support/knapsack.rb
and add there:
require 'knapsack'
# CUSTOM_CONFIG_GOES_HERE
Knapsack::Adapters::CucumberAdapter.bind
You can change default Knapsack configuration for RSpec or Cucumber tests. Here are examples what you can do. Put below configuration instead of CUSTOM_CONFIG_GOES_HERE
.
Knapsack.tracker.config({
enable_time_offset_warning: true,
time_offset_in_seconds: 30
})
Knapsack.report.config({
test_file_pattern: 'spec/**/*_spec.rb', # default value based on adapter
report_path: 'knapsack_custom_report.json'
})
# you can use your own logger
require 'logger'
Knapsack.logger = Logger.new(STDOUT)
Knapsack.logger.level = Logger::INFO
Add this line at the bottom of Rakefile
:
Knapsack.load_tasks if defined?(Knapsack)
Generate time execution report for your test files. Run below command on one of your CI nodes.
# Step for RSpec
$ KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
$ KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
Commit generated report knapsack_rspec_report.json
or knapsack_cucumber_report.json
into your repository.
This report should be updated only after you add a lot of new slow tests or you change existing ones which causes a big time execution difference between CI nodes. Either way, you will get time offset warning at the end of the rspec/cucumber results which reminds you when it’s a good time to regenerate the knapsack report.
There is no need to regenerate the report every time when you add/remove test file. If you remove a test file then Knapsack will ignore its entry in report. In case when you add a new file and it doesn't already exist in report, the test file will be assigned to one of the CI node.
You'll want to regenerate your execution report whenever you remove or add a test file with a long time execution time that would affect one of the CI nodes. You will get Knapsack notification whenever is good time to regenerate report.
On your CI server run this command for the first CI node. Update CI_NODE_INDEX
for the next one.
# Step for RSpec
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
You can add KNAPSACK_TEST_FILE_PATTERN
if your tests are not in default directory. For instance:
# Step for RSpec
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_specs/**/*_spec.rb" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ KNAPSACK_TEST_FILE_PATTERN="directory_with_features/**/*.feature" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
You can set KNAPSACK_REPORT_PATH
if your knapsack report was saved in non default location. Example:
# Step for RSpec
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:rspec
# Step for Cucumber
$ KNAPSACK_REPORT_PATH="knapsack_custom_report.json" CI_NODE_TOTAL=2 CI_NODE_INDEX=0 bundle exec rake knapsack:cucumber
CI_NODE_TOTAL
- total number CI nodes you have.
CI_NODE_INDEX
- index of current CI node starts from 0. Second CI node should have CI_NODE_INDEX=1
.
Knapsack allows you to pass arguments through to rspec. For example if you want to run only specs that have the tag focus
. If you do this with rspec directly it would look like:
$ bundle exec rake rspec --tag focus
To do this with Knapsack you simply add your rspec arguments as parameters to the knapsack rake task.
$ bundle exec rake "knapsack:rspec[--tag focus]"
Remember that using tags to limit which specs get run will affect the time each file takes to run. One solution to this is to generate a new knapsack_rspec_report.json
for the commonly run scenarios.
Add arguments to knapsack cucumber task like this:
$ bundle exec rake "knapsack:cucumber[--name feature]"
If you are using circleci.com you can omit CI_NODE_TOTAL
and CI_NODE_INDEX
. Knapsack will use CIRCLE_NODE_TOTAL
and CIRCLE_NODE_INDEX
provided by CircleCI.
Here is an example for test configuration in your circleci.yml
file.
For the first time run all tests on a single CI node with enabled report generator.
test:
override:
# Step for RSpec
- KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
- KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
After tests pass on your CircleCI machine your should copy knapsack json report which is rendered at the end of rspec/cucumber results. Save it into your repository as knapsack_rspec_report.json
or knapsack_cucumber_report.json
file and commit.
Now you should update test command and enable parallel. Please remember to add additional containers for your project in CircleCI settings.
test:
override:
# Step for RSpec
- bundle exec rake knapsack:rspec:
parallel: true # Caution: there are 8 spaces indentation!
# Step for Cucumber
- bundle exec rake knapsack:cucumber:
parallel: true # Caution: there are 8 spaces indentation!
Now everything should works. You will get warning at the end of rspec/cucumber results if time execution will take too much.
For the first time run all tests at once with enabled report generator. Edit .travis.yml
script:
# Step for RSpec
- "KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec"
# Step for Cucumber
- "KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features"
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber results. Save it into your repository as knapsack_rspec_report.json
or knapsack_cucumber_report.json
file and commit.
You can parallel your builds across virtual machines with travis matrix feature. Edit .travis.yml
script:
# Step for RSpec
- "bundle exec rake knapsack:rspec"
# Step for Cucumber
- "bundle exec rake knapsack:cucumber"
env:
- CI_NODE_TOTAL=2 CI_NODE_INDEX=0
- CI_NODE_TOTAL=2 CI_NODE_INDEX=1
If you want to have some global ENVs and matrix of ENVs then do it like this:
script:
# Step for RSpec
- "bundle exec rake knapsack:rspec"
# Step for Cucumber
- "bundle exec rake knapsack:cucumber"
env:
global:
- RAILS_ENV=test
- MY_GLOBAL_VAR=123
- CI_NODE_TOTAL=2
matrix:
- CI_NODE_INDEX=0
- CI_NODE_INDEX=1
Such configuration will generate matrix with 2 following ENV rows:
CI_NODE_TOTAL=2 CI_NODE_INDEX=0 RAILS_ENV=test MY_GLOBAL_VAR=123
CI_NODE_TOTAL=2 CI_NODE_INDEX=1 RAILS_ENV=test MY_GLOBAL_VAR=123
More info about global and matrix ENV configuration in travis docs.
For the first time run all tests at once with enabled report generator. Set up your build command:
# Step for RSpec
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber results. Save it into your repository as knapsack_rspec_report.json
or knapsack_cucumber_report.json
file and commit.
Knapsack supports semaphoreapp ENVs SEMAPHORE_THREAD_COUNT
and SEMAPHORE_CURRENT_THREAD
. The only thing you need to do is set up knapsack rspec/cucumber command for as many threads as you need. Here is an example:
# Thread 1
## Step for RSpec
bundle exec rake knapsack:rspec
## Step for Cucumber
bundle exec rake knapsack:cucumber
# Thread 2
## Step for RSpec
bundle exec rake knapsack:rspec
## Step for Cucumber
bundle exec rake knapsack:cucumber
Tests will be split across threads.
For the first time run all tests at once with enabled report generator. Run the following commands locally:
# Step for RSpec
KNAPSACK_GENERATE_REPORT=true bundle exec rspec spec
# Step for Cucumber
KNAPSACK_GENERATE_REPORT=true bundle exec cucumber features
After tests pass your should copy knapsack json report which is rendered at the end of rspec/cucumber results. Save it into your repository as knapsack_rspec_report.json
or knapsack_cucumber_report.json
file and commit.
Knapsack supports buildkite ENVs BUILDKITE_PARALLEL_JOB_COUNT
and BUILDKITE_PARALLEL_JOB
. The only thing you need to do is to configure the parallelism parameter in your build step and run the appropiate command in your build
# Step for RSpec
bundle exec rake knapsack:rspec
# Step for Cucumber
bundle exec rake knapsack:cucumber
To run specs for Knapsack gem type:
$ bundle exec rspec spec
Directory spec_examples
contains examples of fast and slow specs. There is a spec_example/spec_helper.rb
with binded Knapsack.
To generate a new knapsack report for specs with focus
tag (only specs in spec_examples/leftover
directory have no focus
tag), please type:
$ KNAPSACK_GENERATE_REPORT=true bundle exec rspec --default-path spec_examples --tag focus
Warning: Current knapsack_rspec_report.json
file was generated for spec_examples
except spec_examples/leftover
directory. Just for testing reason to see how leftover specs will be distribute in a dumb way across CI nodes.
To see specs distributed for the first CI node type:
$ CI_NODE_TOTAL=2 CI_NODE_INDEX=0 KNAPSACK_SPEC_PATTERN="spec_examples/**/*_spec.rb" bundle exec rake knapsack:rspec
Specs in spec_examples/leftover
take more than 3 seconds. This should cause a Knapsack time offset warning because we set time_offset_in_seconds
to 3 in spec_examples/spec_helper.rb
. Type below to see warning:
$ bundle exec rspec --default-path spec_examples
- Fork it ( https://github.com/ArturT/knapsack/fork )
- Create your feature branch (
git checkout -b my-new-feature
) - Commit your changes (
git commit -am 'Add some feature'
) - Push to the branch (
git push origin my-new-feature
) - Create a new Pull Request
Many thanks to Małgorzata Nowak for beautiful logo.
- Lunar Logic Blog | Parallel your specs and don’t waste time
- Travis CI | Parallelizing RSpec and Cucumber on multiple VMs
- Semaphore | Running RSpec specs in parallel
- Semaphore | Running Cucumber scenarios in parallel