OpenDataCam 2.0.0

This project is offline lightweight DIY solution to monitor urban landscape. After installing this software on the specified hardware (Nvidia Jetson board + Logitech webcam), you will be able to count cars, pedestrians, motorbikes from your webcam live stream.

Behind the scenes, it feeds the webcam stream to a neural network (YOLO darknet) and make sense of the generated detections.

It is very alpha and we do not provide any guarantee that this will work for your use case, but we conceived it as a starting point from where you can build-on & improve.

👉 See Demo Video (4 min)

Table of content

OpenDataCam 2.0.0

💻 Hardware pre-requisite

Nvidia Jetson Nano / TX2 / Xavier or any GNU/Linux x86_64 machine with a CUDA compatible GPU with nvidia-docker v2.0 (in the cloud or locally)
Webcam Logitech C222, C270, C310, C920 / Rasberry Pi cam for Jetson nano / a Video file / IP camera
A smartphone / tablet / laptop that you will use to operate the system

If you have a Jetson Nano, please read this specific documentation

Also see In depth guide about compatible Cameras with Jetson

🎬 Get Started, quick setup

1. Software pre-requisite 📦

For jetson: Flash Jetson board to jetpack 4.2 or 4.2.1 ⚡️

Ignore this if you are not running on a jetson

See How to find out your jetpack version

If your jetson does not have jetpack 4.2 or 4.2.1 (CUDA 10, TensorRT 5, cuDNN 7.3, Ubuntu 18.04)

Follow this guide to flash your jetson

For non-jetson: Install nvidia-docker v2.0 🔧

Ignore this if you are running on a jetson, nvidia-docker isn't necessary with jetpack 4.2

Nvidia-docker v2.0 is only compatible with GNU/Linux x86_64 machine with a CUDA compatible GPU

Follow this guide to install nvidia-docker v2.0 on your machine

2. Install and start OpenDataCam 🚀

Open a terminal or ssh to you machine and run the following commands depending on your platform

For a Jetson: make sure an usb webcam is connected on video0

ls /dev/video*
# Output should be: /dev/video0

If this isn't the case, run the install script anyway, and after you will need to modify the config.json file to select your desired VIDEO_INPUT (file, usbcam, raspberrycam, remote IP cam), we will improve setup / install process for v2.1 💪

For a nvidia-docker compatible machine: it will run on a demo file

Install commands:

# Download install script
wget -N https://raw.githubusercontent.com/opendatacam/opendatacam/v2.0.0/docker/install-opendatacam.sh

# Give exec permission
chmod 777 install-opendatacam.sh

# NB: You will be asked for sudo password when installing the docker container

# Install command for Jetson Nano
./install-opendatacam.sh --platform nano

# Install command for Jetson TX2
./install-opendatacam.sh --platform tx2

# Install command for Jetson Xavier
./install-opendatacam.sh --platform xavier

# Install command for a Nvidia-docker machine (ARCH_BIN=6.1)
# NB: Will run from demo file, you can change this after install, see "5. Customize OpenDataCam"
./install-opendatacam.sh --platform nvidiadocker_cuda_archbin_6_1

This command will download and start a docker container on the machine. After it finishes the docker container starts a webserver on port 8080.

The docker container is started in auto-restart mode, so if you reboot your machine it will automaticaly start opendatacam on startup. (Learn more about the specificities of docker on jetson)

You can also use opendatacam without docker

2. bis (optional) Upgrade OpenDataCam (from v2.x to another v2.x version)

If you have modified the config.json, save it somewhere
Remove config.json, install-opendatacam.sh, run-docker.sh, run-opendatacam.sh (To improve, make install script remove them)
Run the install steps again (previous section), this will download a new default config.json file compatible with the opendatacam version you are installing and setup a new docker container
Open the newly downloaded config.json script and modify with the things you had changed previously

NB: we do not handle auto update of the config.json file

3. Use OpenDataCam 🖖

Open your browser at http://IPOFJETSON:8080 .

If you are running with the jetson connected to a screen: http://localhost:8080

NB: OpenDataCam only supports one client at a time, if you open the UI on two different devices, the stream will stop in one of them.

See Docker playbook ️📚 how to restart / stop OpenDataCam.

4. Configure your Wifi hotspot 📲

In order to operate opendatacam from your phone / tablet / computer.

See Make jetson device / machine accessible via WIFI

5. Customize OpenDataCam ️️⚙️

We offer several customization options:

Video input: run from a file, change webcam resolution, change camera type (raspberry cam, usb cam...)
Neural network: change YOLO weights files depending on your hardware capacity, desired FPS (tinyYOLO, full yolov3, yolov3-openimages ...)
Change display classes: We default to mobility classes (car, bus, person...), but you can change this

Learn how to customize OpenDataCam

6. Docker playbook ️📚

Docker specificities on jetson

Docker doesn't support GPU usage on Jetson (see issue #214 on docker-nvidia official repo , support should be landing around Q3-Q4 2019)

Meanwhile we need to give to the docker container access to the host platform GPU. We do so by mounting several volumes with this script.

That is why you need to use our install script to install a container. We have an open issue to simplify setup once nvidia-docker support lands for jetson devices.

How to show OpenDataCam logs

# List containers
sudo docker container list

sudo docker logs <containerID>

How to stop / restart OpenDataCam

# List containers
sudo docker container list

# Stop container (get id from previous command)
sudo docker stop <containerID>

# Start container (will mount the opendatacam_videos/ and the config.json + mount CUDA necessary stuff)
sudo ./run-opendatacam.sh

# Restart container (after modifying the config.json file for example)
sudo docker restart <containerID>

# Install a newer version of opendatacam
# Follow the 1. Install and start OpenDataCam

# See stats ( CPU , memory usage ...)
sudo docker stats <containerID>

# Clear all docker container, images ...
sudo docker system prune -a

🔌 API Documentation

In order to solve use cases that aren't taken care by our opendatacam base app, you might be able to build on top of our API instead of forking the project.

https://opendatacam.github.io/opendatacam/apidoc/