N.A.G.E.K.I.
Main Project
A cheap，simple，Ongeki controller Use Keyboard Simulation and Mouse Simulation to controller the ongeki game. Using Pro-micro control.
中文版介绍 Chinese version
Befor download
FOR All the blueprint,I didnt do the Screw holes, so thats mean you need use drill to creat a hold for screw,I use M3x25 screw to fix all the part.
First
you need print the PCB and you need a Promicro to control.
I already ping the ports out so you just need connect them.
For main.
I recommend you use the 15 or 20mm Density wood board
details
For the main button,I get 67x67mm hole,thats a really big size than the button you got.But you will get the Acrylic board,that will fix the hole. you need 60x60mm button.
for menu button,I get 50x50mm hole,same,that hold will a bit large than the button size,so you need the Acrylic board. you nedd 44x44mm button
for side button,I use the 100x100mm button,thats the cheap and easy way to solve the side button problem.
Then,you need a encoder to control the lever.
also you need a frame to fixed encoder.
For the lever,you can buy the wood stick or the iron stick,then you can try to use some gear or something to fixed the stick and encoder,I will post here if i get the good way to fixed them.
For surface.
I recommend you use the UV print on the surface,I used 2mm thickness board.
Also,you can just use the Acrylic board on surface.
!!! Important !!!
you must have the surface board,because the main board size will a bit larger than the button you got! you need surface board to fix that!!!
and you can use UV print with this pic.
Afer everything,you will get a complete NAGEKI controller.
