ANCS for Unicorn pHAT (on Pi Zero)

This is a fork of ancs4linux to display notification on a Unicorn pHAT LEDs running on a Raspberry Pi Zero.

Building

The project consists of two daemons running in background.

sudo apt-get install -y libgirepository1.0-dev
git clone https://github.com/cl3m/ancs4linux
sudo ./ancs4linux/autorun/install.sh

Start

If you previously paired the devices, unpair them on both ends (remove them from known device list). To start run the following command. You should see a rainbow on the Unicorn then on your mobile device, open Settings -> Bluetooth. You should see a your device (default name PiZero). If it does not work, try to connect with nRF Connect for Mobile.

sudo ./ancs4linux/autorun/run.sh

Autostart by adding the following line to /etc/rc.local

sudo /home/pi/ancs4linux/autorun/run.sh &