Starting.....please wait [BUG]
Oldskool81 opened this issue · 4 comments
Did you test the latest release build?
Yes, and the problem still exists.
Bug Description
Installed latest firmware and Voxi red DWIN. Aquila_GD32_MM-ProUI-EX-MPC-05-13 screen is stuck on Starting......Please wait. will not boot.
Printer Model
Voxelab Aquila
Model Type
Aquila
Your Mainboard
Aquila GD32
Other Mainboard Type
No response
Add-ons that could be involved
No response
ProUI?
ProUI
Bed Leveling
MM - Manual Mesh Bed Leveling
Did you include your own configuration files?
- A ZIP file containing your
Configuration.h
andConfiguration_adv.h
.
Additional information & file uploads
No response
im pretty sure I know exactly what the cause of this issue is. I will post a new release soon. thanks for pointing this out
Aquila_GD32_MM-ProUI-EX-MPC.zip
I made a quick firmware file you can try flashing and see if that works
That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!
I had updated the settings.cpp file so that it saved memory so more features could be added to some versions. I tested the firmware using a probe so I figured it should be all good. some variables act as place holders in the EEPROM, I just reverted a couple changes I made.
Marlin just updated with a few more file changes, like this ⚡️ Fix motion smoothness
So, I'll be uploading a revised release, lookout for that soon.