Rustbus

Rustbus implements the dbus specification for local unix sockets. It is not a bus implementation but a library that enables clients to communicate over the dbus daemon.

This was created by only reading the spec at https://dbus.freedesktop.org/doc/dbus-specification.html. While I made some false assumptions when implementing the spec that was mostly my fault. The document seems to be enough to write a working implementation without looking at others code.

What does this provide?

This libary provides the means to send and receive messages over a dbus bus. This means: signals, calls, and (error)replys. It also provides some standard messages for convenience. There is also a MessageBuilder to help you conveniently build your own messages.

Dbus does technically work over any transport but this currently only supports unix streaming sockets. Support for other transports should be rather simple, but they require the implementation of some other authentication mechanisms.

Transmitting filedescriptors works. The limit is currently set to 10 per message but since dbus-daemon limits this even more this should be fine.

State of this project

There are some tests for correctness and the dbus-daemon seems to generally accept all messages sent by this lib.

Interoperability with libdbus is not yet thorougly tested, but the dbus-monitor tool correctly displays the signals sent in the 'examples/sig.rs' example which uses pretty much all different types that can occur.

The unmarshalling has been fuzzed and doesn't panic on any input so far. If you wanto to help fuzzing, just use the command: cargo +nightly fuzz run fuzz_unmarshal

The API is still very much in progress and breaking changes are to be expected.

What's where?

rustbus is the core crate containing bus-connection and (un)-marshalling code. If you want to write an application you only need this.
rustbus_derive contains the procmacros to derive the (Un-)Marshal traits for structs. The macros are re-exported by rustbus so you dont need to worry about that.
rustbus_derive_test is only there to verify that the derives do the right things. procmacro crates apparently can't contain tests themselves.
example_keywallet is there as
- a more complex example showcasing rustbus
- a testing ground for new ideas to validate how it would impact actual development

Quickstart

use rustbus::{connection::Timeout, get_session_bus_path, DuplexConn, MessageBuilder};
fn main() -> Result<(), rustbus::connection::Error> {
    // To get a connection going you need to connect to a bus. You will likely use either the session or the system bus.
    let session_path = get_session_bus_path()?;
    let mut con: DuplexConn = DuplexConn::connect_to_bus(session_path, true)?;
    // Dont forget to send the obligatory hello message. send_hello wraps the call and parses the response for convenience.
    let _unique_name: String = con.send_hello(Timeout::Infinite)?;

    // Next you will probably want to create a new message to send out to the world
    let mut sig = MessageBuilder::new()
        .signal("io.killing.spark", "TestSignal", r#"/io/killing/spark"#)
        .build();

    // To put parameters into that message you use the sig.body.push_param functions. These accept anything that can be marshalled into a dbus parameter
    // You can derive or manually implement that trait for your own types if you need that.
    sig.body.push_param("My cool new Signal!").unwrap();

    // Now send you signal to all that want to hear it!
    con.send.send_message(&sig)?.write_all().unwrap();

    // To receive messages sent to you you can call the various functions on the RecvConn. The simplest is this:
    let message = con.recv.get_next_message(Timeout::Infinite)?;

    // Now you can inspect the message.dynheader for all the metadata on the message
    println!("The messages dynamic header: {:?}", message.dynheader);

    // After inspecting that dynheader you should know which content the message should contain
    let cool_string = message.body.parser().get::<&str>().unwrap();
    println!("Received a cool string: {}", cool_string);
    Ok(())
}

Other connection Types

There are some more connection types in the connection module. These are convenience wrappes around the concepts presented in the quickstart.

RpcConn is meant for clients calling methods on services on the bus
DispatchConn is meant for services that need to dispatch calls to many handlers.

Since different usecases have different constraints you might need to write your own wrapper around the low level conn. This should not be too hard if you copy the existing ones and modify them to your needs. If you have an issue that would be helpful for others I would of course consider adding it to this libary.

Params and Marshal and Unmarshal

This lib started out as an attempt to understand how dbus worked. Thus I modeled the types a closely as possible with enums, which is still in the params module. This is kept around for weird weird edge-cases where that might be necessary but they should not generally be used.

Instead you should be using the Marshal and Unmarshal traits which are implemented for most common types you will need. The idea is to map rust types as closely as possible to dbus types. The trivial types like String and u64 etc are dealt with easily. For tuple-structs there are impls up to a certain size. After that you'd need to copy the impl from this lib and extend it accordingly. This might be dealt with in the future if variadic generics get added to rust.

For structs there is a derive proc-macro that derives the necessary trait impls for you. Look into rustbus_derive if this is of need for you.

For Variants there is a macro dbus_variant_sig! and dbus_variant_var! which will generate an enum and the Marshal and Unmarshal impls for you. These might get replaced with a proc-macro derive like it exists already for structs.

The doc for the traits gives more specifics on how to implement them for your own types if necessary.

There is an exmaple for all of this in examples/user_defined_types.rs. And for the deriving for structs there is an example in examples/deriving.rs

Filedescriptors

Dbus can send filedescriptors around for you. Rustbus supports this. There is a special wrapper type in the wire module. This type tries to sensibly deal with the pitfalls of sending and receiving filedescriptors in a sensible way. If you see any issues with the API or have wishes for extensions to the API please open an issue.

Byteorders

Dbus supports both big and little endian and so does rustbus. You can specify how a message should be marshalled when you create the MessageBuilder. Messages can be received in any byteorder and will be transparently unmarshalled into the byteorder you CPU uses. Note that unmarshalling from/to the native byteorder will be faster. The default byteorder is little endian.

cmaves/rustbus