cmroche/OctoPrint-HomeAssistant

Issues

• Not updating HA mqtt messages

  #120 opened 2 months ago by patrickcollins12
  1

• [Bug] Print file uses wrong topic

  #119 opened 6 months ago by bungee-boy
  1

• 2 instances on 1 Pi now result in 4 Devices in HA

  #117 opened a year ago by evilmumi
  0

• How to delete MQTT Device?

  #116 opened a year ago by IvoryBalboa
  0

• These entities are still listed as having name errors after full update of OctoPi/Plugins.

  #115 opened a year ago by nerlins
  3

• [Request] Sensor: Material used

  #77 opened 3 years ago by Darklyte
  2

• Discovered entities with a name that starts with the device name

  #114 opened a year ago by tankdeer
  5

• Issue since 3.6.5

  #110 opened a year ago by halfluck
  2

• All Time Measurements Not working after latest update

  #107 opened a year ago by sushibagel
  15

• Add sensor discovery for PrintDone event?

  #105 opened a year ago by tideline3d
  1

• Connect/Disconnect not working with OctoPrint 1.9.0

  #101 opened 2 years ago by sendorm
  14

• [Bug] pause switch does not resume print

  #96 opened 2 years ago by manolitto
  3

• Feature Request - Shutdown from HomeAssistant

  #98 opened 2 years ago by Norm71
  2

• Entities Unavailable after HASS Restart

  #55 opened 3 years ago by Yukigamine
  25

• [Feature] Put print_time, print_time_left and approximate_completion_time in Graphs

  #97 opened 2 years ago by RevLaw
  0

• Add ability to disable/enable the added switches/buttons

  #94 opened 2 years ago by PartemImperium
  0

• Approximate Completion Time shows value when not printing

  #91 opened 3 years ago by tideline3d
  4

• Send more commands to OctoPrint?

  #63 opened 3 years ago by garyt72
  3

• Feature: Show printer firmware in device card

  #57 opened 3 years ago by buffedelic
  3

• Multiple Octoprint Instances

  #88 opened 3 years ago by huskyte
  1

• Estimated Finish Time

  #61 opened 3 years ago by dwoosnam
  6

• [Feature Request] Incorporate Enclosure plugin info

  #85 opened 3 years ago by tankdeer
  2

• Only seeing SOC temp and PSU Control

  #73 opened 3 years ago by ripvega
  4

• Auto-shutdown once the printer has cooled down guide

  #69 opened 3 years ago by Walmtech
  1

• Why publish camera configuration?

  #84 opened 3 years ago by Sennevds
  3

• Use new button entities

  #87 opened 3 years ago by 1RandomDev
  2

• PSU Control

  #86 opened 3 years ago by johnnysmithy852456
  1

• Multiple Commands not working

  #83 opened 3 years ago by MTrab
  3

• only one instance at a time

  #48 opened 4 years ago by NinDTendo
  12

• Plugin incompatibility with OpenHAB?

  #75 opened 3 years ago by dido77-arduino
  2

• Example card setup for Lovelace doesnt work

  #74 opened 3 years ago by yasars
  2

• switch.ender3

  #70 opened 3 years ago by michalk-k
  3

• MQTT changing/setting Base topic other than default octoPrint breaks integration

  #79 opened 3 years ago by ImagineerNL
  2

• 3.3.1 breaks HA integration for me

  #81 opened 3 years ago by halfluck
  4

• New handling of float conversion in HA 2021.10 throws error

  #78 opened 3 years ago by Arquiteto
  2

• sensor octoprint_print_time_left as time not as state

  #76 opened 3 years ago by phiwa99
  1

• Add raw time value as attribute

  #71 opened 3 years ago by Sebclem
  0

• Autodiscovery in Homeassistant not working?

  #49 opened 4 years ago by InventoCasa
  2

• Add current layer and total layer metrics

  #56 opened 4 years ago by JumpMaster
  6

• Question: Get status from Filament Manager

  #66 opened 4 years ago by klec00
  2

• MQTT reported progress is lagging behind actual progress

  #67 opened 4 years ago by narfel
  1

• File List

  #65 opened 4 years ago by willpuckett
  4

• File uploaded event/notification for turning the printer on

  #60 opened 4 years ago by calexandre
  3

• feature request - G-Code + Camera

  #59 opened 4 years ago by coolduke666
  2

• entities in Home Assisten are unavailable

  #58 opened 4 years ago by DariBer
  2

• Formatting Of "estimatedPrintTimeFormatted"

  #45 opened 4 years ago by vrtlvoid
  4

• Add chamber temperature entity

  #44 opened 4 years ago by ubershy
  1

• Group-entitie with things from OctoPrint Auto-discovery

  #53 opened 4 years ago by exetico
  3

• Duplicata of the same printer in HA

  #51 opened 4 years ago by HydrelioxGitHub
  2

• Erroneous JSON: Connected

  #43 opened 4 years ago by Metus88
  12