Looking for the latest version?
I've moved the project back to thisiskeithb/Marlin/tree/prusa-aio/bugfix-2.0.x
- thisiskeithb
All-in-One Prusa SKR Marlin Firmware (Beta)
About
Originally configured for a Prusa MK3S/+ Bear upgraded with an SKR 1.4, this All-in-One firmware supports 210/320mm Bear and 220/320/420mm Caribou printers with common upgrades like:
- Motherboards
- SKR 1.4 + Turbo
- SKR 2.0 Rev. B with flash drive support
- BTT002
- MKS/Makerbase SGen-L V2 (Coming soon!)
- MKS/Makerbase Robin Nano V3 (Coming soon!)
- Drivers
- TMC2209s
- TMC5160s (Coming soon!)
- Display
- BigTreeTech dual mode TFT (TFT35/TFT50/TFT70/etc.)
- WINSTAR OLED-based RepRapDiscount smart controller
- LDO/Moons Stepper Motors
- Planetary extruder
- 0.9° X/Y/E
- Bondtech BMG extruder
- BMG upgrade kit from Bondtech
- Self-printed BMG
- Slice Engineering 450°C High Temperature thermistor
- Probes
- BLTouch
- SuperPINDA
- NeoPixels
Configuring & Building Prusa SKR Firmware
To configure this firmware, edit Prusa_SKR_Configuration.h
To build this firmware, you'll need PlatformIO. Detailed setup instructions can be found on the Building Marlin with PlatformIO for ReArm guide.
Helpful links
- Chris Warkocki's SKR Bear Github, SKR Bear wiring guide, and SKR Bear videos
- #🐻-skr-bear-firmware on The FDM Lounge Discord server
- Prusa Bear Upgrade Facebook group
- Prusa Community Facebook group
Credits
If you find this project helpful, please consider donating:
- Chris Warkocki [@codiac2600], SKR Bear Project - Patreon
- Keith Bennett [@thisiskeithb], Marlin tester/config builder - Github Sponsors
- Grégoire Saunier [@gregsaun], Prusa Bear Project - Patreon
- Scott Lahteine [@thinkyhead], Lead Marlin dev/maintainer - Donate
License
Marlin and the Prusa SKR Firmware is published under the GPL license because we believe in open development.