Yet Another Small Form Factor.
- Volume : 6.4L
- Dimensions : 188mm Deep * 223mm Wide * 152mm High
- ITX motherboard
- CPU cooler max height ~70mm
- SFX/SFX-L PSU
- Full height Graphics card max 140mm tall, 175 long
| Part | Qty | Type | Cost | Link | Easy Source |
|---|---|---|---|---|---|
| Base Plate - 4.5mm | 1 | Laser Cut | $5 | Link | ebay.com (a4 4.5mm perspex) |
| Back Panel - 4.5mm | 1 | Laser Cut | $5 | Link | ebay.com (a4 4.5mm perspex) |
| Left Panel - 3mm | 1 | Laser Cut | $4 | Link | ebay.com (a4 3mm perspex) |
| Right Panel - 3mm | 1 | Laser Cut | $4 | Link | ebay.com (a4 3mm perspex) |
| Top Panel - 3mm | 1 | Laser Cut | $4 | Link | ebay.com (a4 3mm perspex) |
| Feet - Foam | 1 | Laser Cut | $1 | Link | ebay.com |
| Rear Uprights | 2 | 3d Printed | < $6ea for FDM ABS | Link | 3dhubs.com |
| Front Uprights | 2 | 3d Printed | < $6ea for FDM ABS | Link | 3dhubs.com |
All files are designed to print on < A4 size acrylic/timber other cuttable material, this size is often found at a good price on ebay or cut to order places. It will also fit in even the smallest laser cutter. cough k40
| Part | Qty | Cost | Image | Source |
|---|---|---|---|---|
| M3 Nut-sert (9mm deep) | 10 | $3 | Link | ebay.com |
| M3 Bolt - 16mm | 8 | $1 | Link | ebay.com |
| M3 Bolt - 6mm | 10 | $1 | Link | ebay.com |
| M3 5mm Brass hex female-female spacer | 4 | $3 | Link | ebay.com |
| 12mm momentary switch | 10 | $1 | Link | ebay.com |
I'll endeavour to get more information, prices, instructions and all that jazz. There is more than enough to go build one for yourself at this point so enjoy.
There is a build log at smallformfactor.net that you can follow HERE
Any issues just report them ill take a look, ill also accept merge requests for fixes or additional documentation.