procket is an Erlang library for socket creation and manipulation.
procket can use a setuid helper so actions like binding low ports and requesting some sockets types can be done while Erlang is running as an unprivileged user.
Other features include:
-
low level socket manipulation using socket/3, ioctl/3, setsockopt/4, ...
-
support any protocols supported by the socket interface: ICMP, Unix sockets, ...
-
support for the BSD raw socket interface
-
generate and snoop packets using PF_PACKET sockets on Linux
-
generate and snoop packets using the BPF interface on BSDs like Mac OS X
-
support for creating and reading/writing from character devices like TUN/TAP interfaces
procket works with any version of Erlang after R14A.
protocol() = ip | icmp | tcp | udp | 'ipv6-icmp' | raw
type() = stream | dgram | raw | seqpacket
family() = unspec | inet | inet6 | netlink | packet | local | unix | file
open(Port) -> {ok, FD} | {error, posix()}
open(Port, Options) -> {ok, FD} | {error, posix()}
Types Port = 0..65535
Options = [Opts]
Opts = {protocol, Protocol} | {type, Type} | {family, Family}
| {ip, IPAddress}
| {dev, string()}
| {exec, [string()]}
| {progname, string()}
| {interface, string()}
| {pipe, string()}
| {namespace, string()}
Protocol = protocol() | integer()
Type = type() | integer()
Family = family() | integer()
IPAddress = inet:ip_address()
FD = integer()
Open a socket or device using the procket setuid helper. The
file descriptor is passed back over a Unix socket.
The default behaviour of open/1,2 is to attempt to open the
socket twice: first by running the procket setuid helper and, if this
fails because the process does not have the appropriate permissions,
running the setuid helper again using "sudo". The default behaviour
can be changed by using the 'exec' option:
procket:open(Port, [{exec, ["", "sudo"]}]).
Linux only: the `{namespace, string()}` option causes the procket
setuid helper to open the socket in a pre-configured namespace. By
default, all namespaces are joined by the helper.
dev(Dev) -> {ok, FD} | {error, posix()}
Types Dev = string()
Wrapper around open/2. Opens a character device such as bpf,
tun or tap devices.
socket(Family, Type, Protocol) -> {ok, FD} | {error, posix()}
Types Family = family() | integer()
Type = type() | integer()
See socket(2).
listen(Socket) -> ok | {error, posix()}
listen(Socket, Backlog) -> ok | {error, posix()}
Types Socket = integer()
Backlog = integer()
See listen(2). listen/1 sets the backlog to 50.
connect(Socket, Sockaddr) -> ok | {error, posix()}
Types Socket = integer()
Sockaddr = <<>> | binary()
See connect(2).
Sockaddr is a struct sockaddr whose layout is dependent on
platform. If Sockaddr is an empty binary, connect(2) will be
called with NULL as the second option.
accept(Socket) -> {ok, FD} | {error, posix()}
accept(Socket, Salen) -> {ok, FD, Sockaddr} | {error, posix()}
Types Socket = integer()
Salen = 0 | non_neg_integer()
Sockaddr = binary()
See accept(2).
accept/1 returns the file descriptor associated with the new
connection.
accept/2 will allocate a struct sockaddr of size Salen bytes
that will hold the peer address. If the size is too small, the
returned binary will be zero padded to indicate the size required.
close(Socket) -> ok | {error, posix()}
Types Socket = integer()
See close(2).
recv(Socket, Size) -> {ok, Buf} | {error, posix()}
recvfrom(Socket, Size) -> {ok, Buf} | {error, posix()}
recvfrom(Socket, Size, Flags, Salen) -> {ok, Buf, Sockaddr}
Types Socket = integer()
Size = ulong()
Flags = integer()
Salen = 0 | ulong()
Buf = binary()
Sockaddr = binary()
See recv(2).
recvmsg(Socket, Size, Flags, CtrlDataSize) -> {ok, Buf, Flags, CtrlData} |
{error, posix()}
recvmsg(Socket, Size, Flags, CtrlDataSize, SockaddrSize) -> {ok, Buf, Flags, CtrlData, Sockaddr} |
{error, posix()}
Types Socket = integer()
Size = ulong()
CtrlDataSize = ulong()
SockaddrSize = ulong()
Flags = integer()
Buf = binary()
Sockaddr = binary()
CtrlData = [{integer(), integer(), binary()}]
See recvmsg(2) and cmsg(3).
The control data, if any, is returned as a list of 3-tuples consisting of the cmsg
level, type and data fields.
sendto(Socket, Buf) -> ok | {error, posix()}
sendto(Socket, Buf, Flags) -> ok | {error, posix()}
sendto(Socket, Buf, Flags, Sockaddr) -> ok | {ok, Size} | {error, posix()}
Types Socket = integer()
Flags = integer()
Buf = binary()
Sockaddr = binary()
Size = non_neg_integer()
See sendto(2).
In the case of a partial write, sendto/4 will return the number
of bytes written.
sendmsg(Socket, Buf, Flags, CtrlData) -> ok | {error, posix()}
sendmsg(Socket, Buf, Flags, CtrlData, Sockaddr) -> ok | {ok, Size} | {error, posix()}
Types Socket = integer()
Buf = binary()
Flags = integer()
CtrlData = [{integer(), integer(), binary()}]
Sockaddr = binary()
Size = non_neg_integer()
See sendmsg(2) and cmsg(3).
The control data, if any, is sent as a list of 3-tuples consisting of the cmsg
level, type and data fields.
In the case of a partial write, sendmsg/5 will return the number
of bytes written.
read(FD, Length) -> {ok, Buf} | {error, posix()}
Types FD = integer()
Length = ulong()
Buf = binary()
See read(2).
The returned byte_size(Buf) is the actual number of bytes read.
write(FD, Buf) -> ok | {ok, Size} | {error, posix()}
writev(FD, Bufs) -> ok | {ok, Size} | {error, posix()}
Types FD = integer()
Buf = Bufs | binary()
Bufs = [ binary() ]
Size = non_neg_integer()
See write(2) and writev(2).
write/2 and writev/2 will return 'ok' if the complete buffer was
written and {ok,non_neg_integer()} in the case of a partial write:
write_exact(FD, Buf) ->
case procket:write(FD, Buf) of
ok ->
ok;
{ok, N} ->
<<_:N/bytes, Rest/binary>> = Buf,
write_exact(FD, Rest);
Error ->
Error
end.
bind(Socket, Sockaddr) -> ok | {error, posix()}
Types Socket = integer()
Sockaddr = binary()
See bind(2).
setsockopt(Socket, Level, Optname, Optval) -> ok | Error
Types Socket = integer()
Level = integer() | atom()
Optname = integer() | atom()
Optval = binary()
Error = {error, posix() | unsupported}
See setsockopt(2).
Level and Optname can either be an integer or an atom with the
same name as the definitions in the system header files, e.g.,
'IPPROTO_IPIP', 'SO_REUSEPORT'. Note these are uppercase atoms
and so must be quoted.
If an atom is used as an argument and is not supported by the OS,
setsockopt/4 will return {error,unsupported}.
getsockopt(Socket, Level, Optname, Optval) -> {ok, Buf} | Error
Types Socket = integer()
Level = integer() | atom()
Optname = integer() | atom()
Optval = binary()
Buf = binary()
Error = {error, posix() | unsupported}
See getsockopt(2). Similar to inet:getopts/2 but can be used
with file descriptors.
Retrieve a socket option for a file descriptor. Use an empty
binary to indicate no option value is supplied or will be
returned.
Also see setsockopt/4.
ioctl(FD, Request, Arg) -> {ok, Result} | {error, posix()}
Types FD = integer()
Request = ulong()
Arg = binary() | integer()
See ioctl(2). Be careful with this function.
Request is an integer with the direction of the request encoded
into it (IN, OUT, IN/OUT). Result is a binary holding the result.
If the ioctl is IN only, the Result will be the same as Arg.
Arg is a structure dependent on the request.
See procket_ioctl.erl for some helper functions for dealing
with ioctl.
Caveats:
* Request is an integer on Linux and an unsigned long on OS X
* some ioctl requests require a structure with a pointer to
memory. Use alloc/1 to create these structures and buf/1 to
retrieve the data from them.
* some ioctl requests use an integer rather a pointer to
a structure. This means that it's possible to pass in an
arbitrary pointer (an integer) as an argument to an ioctl
expecting a structure. Don't do this.
alloc(Struct) -> {ok, Arg, Resource} | {error, posix()}
Types Struct = [ binary | {ptr, Length} | {ptr, binary()} ]
Arg = binary()
Length = ulong()
Resource = [resource()]
Create a structure containing pointers to memory that can be
passed as the third argument to ioctl/3.
The size of the allocated memory can be indicated by either
using an integer or passing in a binary of the appropriate size.
If an integer is used, the contents are zero'ed. If a binary is
used, the memory is initialized to the contents of the binary.
Resource is a list of NIF resources (one for each piece of
allocated memory) requested in the struct. The memory will
automatically be freed by the resource.
It is up to the caller to ensure the structure has the proper
endianness and alignment for the platform.
For example, a struct bpf_program is used to set a filter on a
bpf character device:
struct bpf_program {
u_int bf_len;
struct bpf_insn *bf_insns;
};
struct bpf_insn {
u_short code;
u_char jt;
u_char jf;
bpf_u_int32 k;
};
To allocate a binary in Erlang:
Insn = [
?BPF_STMT(?BPF_LD+?BPF_H+?BPF_ABS, 12), % offset = Ethernet Type
?BPF_JUMP(?BPF_JMP+?BPF_JEQ+?BPF_K, ?ETHERTYPE_IP, 0, 1), % type = IP
?BPF_STMT(?BPF_RET+?BPF_K, 16#FFFFFFFF), % return: entire packet
?BPF_STMT(?BPF_RET+?BPF_K, 0) % return: drop packet
],
{ok, Code, [Res]} = procket:alloc([
<<(length(Insn)):4/native-unsigned-integer-unit:8>>,
{ptr, list_to_binary(Insn)}
]).
To use the ioctl and return the contents of the memory:
case procket:ioctl(Socket, ?BIOCSETF, Code) of
{ok, _} ->
procket:buf(Res);
Error ->
Error
end.
buf(Resource) -> {ok, Buf} | {error, enomem}
Types Resource = resource()
Buf = binary()
Returns the contents of memory allocated using alloc/1. See the
example above.
Try running: make
The procket helper executable needs root privileges. Either allow your user to run procket using sudo or copy procket to somewhere owned by root and make it setuid.
-
for sudo
sudo visudo youruser ALL=NOPASSWD: /path/to/procket/priv/procket # if sudoers has enabled "Default requiretty", you will need to set # one of these options too: Defaults!/path/to/procket/priv/procket !requiretty Defaults:youruser !requiretty -
to make it setuid
# Default location sudo chown root priv/procket sudo chmod 4750 priv/procketThe procket setuid helper can also be placed in a system directory:
# System directory sudo cp priv/procket /usr/local/bin sudo chown root:yourgroup /usr/local/bin/procket sudo chmod 4750 /usr/local/bin/procketThen pass the progname argument to open/2:
{ok, FD} = procket:open(53, [{progname, "/usr/local/bin/procket"}, {protocol, udp},{type, dgram},{family, inet}]). -
use Linux capabilities: beam or the user running beam can be given whatever socket privileges are needed. For example, using file capabilities:
setcap cap_net_raw=ep /usr/local/lib/erlang/erts-5.8.3/bin/beam.smpTo see the capabilities:
getcap /usr/local/lib/erlang/erts-5.8.3/bin/beam.smpTo remove the capabilities:
setcap -r /usr/local/lib/erlang/erts-5.8.3/bin/beam.smp
$ erl -pa ebin
Erlang R13B03 (erts-5.7.4) [source] [rq:1] [async-threads:0] [hipe] [kernel-poll:false]
Eshell V5.7.4 (abort with ^G)
1> {ok, FD} = procket:open(53, [{protocol, udp},{type, dgram},{family, inet}]).
{ok,9}
2> {ok, S} = gen_udp:open(0, [{fd,FD}]).
{ok,#Port<0.929>}
3> receive M -> M end.
{udp,#Port<0.929>,{127,0,0,1},47483,"hello\n"}
4>
$ nc -u localhost 53
hello
^C
To build the examples:
make examples
$ erl -pa ebin
1> echo:start(53, [{protocol, tcp}, {type, stream}, {family, inet6}]).
1> icmp:ping("www.yahoo.com").
1> {ok, S} = procket:open(0, [{protocol, 16#0008}, {type, raw}, {family, packet}]).
{ok,12}
2> procket:recvfrom(S, 2048).
{ok,<<0,21,175,89,8,38,0,3,82,3,39,36,8,0,69,0,0,52,242,
0,0,0,52,6,188,81,209,...>>}
3> Port = erlang:open_port({fd, S, S}, [binary, stream]).
4> flush().
Shell got {#Port<0.1343>,
{data,<<224,105,149,59,163>>}}
1> procket:open(53, [{progname, "sudo priv/procket"},{protocol, udp},{type,dgram},{interface, "br0"}]).
{ok,9}
2> procket:open(53, [{progname, "sudo priv/procket"},{protocol, udp},{type,dgram},{interface, "br1"}]).
{ok,10}
procket creates a local domain socket and spawns a small setuid binary (or runs it under sudo). The executable opens a socket, drops privs and passes the file descriptor back to Erlang over the Unix socket.
procket uses libancillary for passing file descriptors between processes:
http://www.normalesup.org/~george/comp/libancillary/
-
Docs and type specs
-
Try to re-use the Unix socket when requesting more fd's from the procket executable
-
Make a procket gen_server (gen_raw(?)).
- Support passive and active modes.
- Hold state for the socket, so the caller does not need to, e.g., use ifindex/2.
- same interface for PF_PACKET and BPF
- support for binding a socket to an interface
- Makefile fixes
- fix link-error on SUSE platforms
- socket notifications
- writev support
- support running from an OTP app and compressed bundles
-
Added ICMPv6 support (preliminary, buggy on FreeBSD localhost I/F)
Many localhost interfaces do not respond ICMP Echo Requests with the proper Echo Reply code.
-
Tested on FreeBSD/amd64 9.0-RELEASE alc0 interface driver
-
BPF support for NetBSD
-
sudo fallback for setuid helper